Download or read book IEEE Std 181 2011 Revision of IEEE Std 181 2003 Redline written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Standard for Transitions Pulses and Related Waveforms written by and published by . This book was released on 2011 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Approximately 100 terms and their definitions, for accurately and precisely describing the waveforms of pulse signals and the process of measuring pulse signals, are presented in this standard. Algorithms are provided for computing the values of defined terms that describe measurable parameters of the waveform, such as transition duration, state level, pulse amplitude, and waveform aberrations. These analysis algorithms are applicable to two-state waveforms having one or two transitions connecting these states. Compound waveform analysis is accomplished by decomposing the compound waveform into its constituent two-state single-transition waveforms. Keywords: aberration, algorithms, compound waveform, histogram, IEEE 181, levels, pulse, pulse amplitude, pulse definitions, pulse measurement, states, state boundaries, state levels, transients, transitions, transition duration, waveforms, waveform analysis, waveform definitions, waveform parameters, waveform terms.

Download or read book Service Oriented Computing ICSOC 2017 Workshops written by Lars Braubach and published by Springer. This book was released on 2018-06-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the revised selected papers of the scientific satellite events that were held in conjunction with the 15th International Conference on Service-Oriented Computing, ICSOC 2017, held in Málaga, Spain, in November 2017. The ICSOC 2017 workshop track consisted of three workshops on a wide range of topics that fall into the general area of service computing: ASOCA 2017: The Second Workshop on Adaptive Service-Oriented and Cloud Applications ISyCC 2016: The Second Workshop on IoT Systems Provisioning and Management in Cloud Computing WESOACS 2017: The 13th International Workshop on Engineering Service-Oriented Applications and Cloud Services

Download or read book Transitions Pulses and Related Waveforms Terms Definitions and Algorithms written by British Standards Institute Staff and published by . This book was released on 1913-07-31 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vocabulary, Waveforms, Wave properties and phenomena, Wave physics, Pulse circuits, Electronic equipment and components

Download or read book Data Analytics and Applications of the Wearable Sensors in Healthcare written by Shabbir Syed-Abdul and published by MDPI. This book was released on 2020-06-17 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a collection of comprehensive research articles on data analytics and applications of wearable devices in healthcare. This Special Issue presents 28 research studies from 137 authors representing 37 institutions from 19 countries. To facilitate the understanding of the research articles, we have organized the book to show various aspects covered in this field, such as eHealth, technology-integrated research, prediction models, rehabilitation studies, prototype systems, community health studies, ergonomics design systems, technology acceptance model evaluation studies, telemonitoring systems, warning systems, application of sensors in sports studies, clinical systems, feasibility studies, geographical location based systems, tracking systems, observational studies, risk assessment studies, human activity recognition systems, impact measurement systems, and a systematic review. We would like to take this opportunity to invite high quality research articles for our next Special Issue entitled “Digital Health and Smart Sensors for Better Management of Cancer and Chronic Diseases” as a part of Sensors journal.

Download or read book Modelling and Control of Switched Reluctance Machines written by Rui Araújo and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators.

Download or read book Lightning Protection Guide written by Dehn + Söhne (Neumarkt i.d. OPf.) and published by . This book was released on 2014 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A New Generation of High Power Waveform Controlled Few Cycle Light Sources written by Marcus Seidel and published by Springer. This book was released on 2019-02-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents first successful experiments to carrier-envelope-phase stabilize a high-power mode-locked thin-disk oscillator and to compress the pulses emitted from this laser to durations of only a few-optical cycles. Moreover, the monograph introduces several methods to achieve power-scalability of compression and stabilization techniques. All experimental approaches are compared in detail and may serve as a guideline for developing high-power waveform controlled, few-cycle light sources which offer tremendous potential to exploit extreme nonlinear optical effects at unprecedentedly high repetition rates and to establish table-top infrared light sources with a unique combination of brilliance and bandwidth. As an example, the realization of a multi-Watt, multi-octave spanning, mid-infrared femtosecond source is described. The thesis starts with a basic introduction to the field of ultrafast laser oscillators. It subsequently presents additional details of previously published research results and establishes a connection between them. It therefore addresses both newcomers to, and experts in the field of high-power ultrafast laser development.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.

Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.

Download or read book Electromagnetic moisture measurement written by Christof Hübner and published by Göttingen University Press. This book was released on 2016 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic moisture measurement technologies have proven to be valuable tools in diverse applications. This monograph covers basic aspects of nondestructive electromagnetic methods of water content determination and relates to the associated highly multidisciplinary field of research and development. It also presents a comprehensive selection of relevant field-tested methods and instruments. The fundamentals of electromagnetic field interactions with dipolar materials are briefly discussed, with special attention towards the dielectric properties of water and aqueous solutions. A tutorial and overview of electromagnetic measurement methods is presented, including dielectric spectroscopy in broad frequency and time domains, as well as dielectric imaging techniques. This review is complemented by a demonstration of successful real-world implementations for the moisture determination of soils, snow, buildings and building materials, food and agricultural goods, as well as various industrial products. The text is completed by a guide concerning the use of reference liquids for the calibration of sensors and instrumentation and by a bibliography of more than 850 references. The monograph is useful as a reference book for researchers and engineers and as a textbook for upper-level students interested in the water content determination of materials.

Download or read book Academic Writing for Graduate Students written by John M. Swales and published by University of Michigan Press ELT. This book was released on 1994 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Course for Nonnative Speakers of English. Genre-based approach. Includes units such as graphs and commenting on other data and research papers.

Download or read book MRI from Picture to Proton written by Donald W. McRobbie and published by Cambridge University Press. This book was released on 2017-04-13 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: MR is a powerful modality. At its most advanced, it can be used not just to image anatomy and pathology, but to investigate organ function, to probe in vivo chemistry, and even to visualise the brain thinking. However, clinicians, technologists and scientists struggle with the study of the subject. The result is sometimes an obscurity of understanding, or a dilution of scientific truth, resulting in misconceptions. This is why MRI from Picture to Proton has achieved its reputation for practical clarity. MR is introduced as a tool, with coverage starting from the images, equipment and scanning protocols and traced back towards the underlying physics theory. With new content on quantitative MRI, MR safety, multi-band excitation, Dixon imaging, MR elastography and advanced pulse sequences, and with additional supportive materials available on the book's website, this new edition is completely revised and updated to reflect the best use of modern MR technology.