Download or read book Zero Emissions Power Cycles written by Evgeny Yantovsky and published by CRC Press. This book was released on 2009-04-23 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fossil-fueled, nonpolluting power generation systems, Zero Emissions Power Cycles presents alternative solutions to the severe emissions problems of power plants. Along with a description of new thermodynamic cycles and the results of computational analyses, this volume provides modern analytical tools and equations to evaluate exergy a

Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants.After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems.With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. - Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants - Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems - Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems

Download or read book Hybrid Power Cycle Arrangements for Lower Emissions written by Anoop Kumar Shukla and published by CRC Press. This book was released on 2022-04-25 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Power Cycle Arrangements for Lower Emissions is an edited book that explores the state-of-the-art for creating effective hybrid power cycles for power generation with lower emission while utilizing different energy sources. The book details energetic and exergetic studies for improving system design and performance of hybrid power cycle arrangements. Chapters in the book provide a systematic approach to the integration and operation of different thermal power cycles with renewable energy sources. The book brings together researchers and practitioners from academia and industry to present their recent and ongoing research and development activities concerning the advancement of hybridization of different conventional and unconventional energy sources to produce efficient and clean energy systems. The book chapters present a range of ongoing research and development activities, challenges, constraints, and opportunities in both theoretical as well as application aspects of several hybrid technologies for power generation. Several issues such as hybridization of different energy sources, availability, environmental impacts, and power cycle integration are addressed in-depth, making this collection a worthy repository for those working in the field of the power cycles.

Download or read book Fundamentals and Applications of Supercritical Carbon Dioxide SCO2 Based Power Cycles written by Klaus Brun and published by Woodhead Publishing. This book was released on 2017-01-09 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles aims to provide engineers and researchers with an authoritative overview of research and technology in this area. Part One introduces the technology and reviews the properties of SCO2 relevant to power cycles. Other sections of the book address components for SCO2 power cycles, such as turbomachinery expanders, compressors, recuperators, and design challenges, such as the need for high-temperature materials. Chapters on key applications, including waste heat, nuclear power, fossil energy, geothermal and concentrated solar power are also included. The final section addresses major international research programs. Readers will learn about the attractive features of SC02 power cycles, which include a lower capital cost potential than the traditional cycle, and the compounding performance benefits from a more efficient thermodynamic cycle on balance of plant requirements, fuel use, and emissions. - Represents the first book to focus exclusively on SC02 power cycles - Contains detailed coverage of cycle fundamentals, key components, and design challenges - Addresses the wide range of applications of SC02 power cycles, from more efficient electricity generation, to ship propulsion

Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture

Download or read book 32nd European Symposium on Computer Aided Process Engineering written by Ludovic Montastruc and published by Elsevier. This book was released on 2022-06-30 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: 32nd European Symposium on Computer Aided Process Engineering: ESCAPE-32 contains the papers presented at the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Toulouse, France. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students and consultants for chemical industries who work in process development and design. - Presents findings and discussions from the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event

Download or read book Carbon Capture Technologies for Gas Turbine Based Power Plants written by Hamidreza Gohari Darabkhani and published by Elsevier. This book was released on 2022-09-24 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture Technologies for Gas-Turbine-Based Power Plants explores current progress in one of the most capable technologies for carbon capture in gas-turbine-based power plants. It identifies the primary benefits and shortcomings of oxy-fuel combustion CO2 capture technology compared to other capture technologies such as pre-combustion and post-combustion capture. This book examines over 20 different oxy-combustion turbine (oxyturbine) power cycles by providing their main operational parameters, thermodynamics and process modelling, energy and exergy analysis and performance evaluation. The conventional natural gas combined cycle (NGCC) power plant with post-combustion capture used as the base-case scenario. The design procedure and operational characteristics of a radial NOx-less oxy-fuel gas turbine combustor are presented with CFD simulation and performance analysis of the heat exchanger network and turbomachinery. Overview of oxygen production and air separation units (ASU) and CO2 compression and purification units (CPU) are also presented and discussed. The most advanced stages of development for the leading oxyturbine power cycles are assessed using techno-economic analysis, sensitivity, risk assessments and levelized cost of energy (LCOE) and analysing technology readiness level (TRL) and development stages. The book concludes with a road map for the development of future gas turbine-based power plants with full carbon capture capabilities using the experiences of the recently demonstrated cycles. - Analyzes more than 20 models of oxyturbine power cycles, identifying the main parameters regarding their operation, process and performance simulations and energy and exergy analysis - Provides techno-economic analysis, TRL, sensitivity and risk analysis, LCOE and stages of development for oxy-combustion turbine power plants - Presents the design procedure and CFD simulation of a radial NOx-less oxy-fuel gas turbine combustor exploring its influence on heat exchanger network and turbomachinery - Supports practitioners, policymakers and energy industry managers seeking pathways to convert coal-fired power plants to gas-fired plants with zero CO2 emission

Download or read book Environmental Challenges and Greenhouse Gas Control for Fossil Fuel Utilization in the 21st Century written by M. Mercedes Maroto-Valer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we are moving ahead into the 21st century, our hunger for cost effective and environmentally friendly energy continues to grow. The Energy Information Administration of US has forecasted that only in the first two decades of the 21st century, our energy demand will increase by 60% compared to the levels at the end of the 20th century. Fossil fuels have been traditionally the major primary energy sources worldwide, and their role is expected to continue growing for the forecasted period, due to their inherent cost competitiveness compared to non-fossil fuel energy sources. However, the current fossil energy scenario is undergoing significant transformations, especially to accommodate increasingly stringent environmental challenges of contaminants like sulfur dioxide, nitrogen oxides or mercury, while still providing affordable energy. Furthermore, traditional fossil fuel utilization is inherently plagued with greenhouse gas emissions from combustion, especially carbon dioxide from stationary sources as well as from mobile sources. Should worldwide government policies dictate a reduction of greenhouse gas emissions, such as proposed by the Kyoto Protocol and the implementation of carbon taxes, fossil fuels would lose their significant competitive appeal in favor of nuclear energy and renewable energy sources. However, the current non-fossil fuel energy share of the worldwide energy market is merely below 15%, and therefore, it is more likely that fossil fuel energy producers would adapt to the new requirements by developing and implementing emission control technologies, and emission trades among other strategies.

Download or read book Hydrogen for Clean Energy Production Combustion Fundamentals and Applications written by Medhat A. Nemitallah and published by Springer Nature. This book was released on with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Conversion Engineering written by Ahmed F. Ghoniem and published by Cambridge University Press. This book was released on 2021-11-11 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique textbook equips students with the theoretical and practical tools needed to model, design, and build efficient and clean low-carbon energy systems. Students are introduced to thermodynamics principles including chemical and electrochemical thermodynamics, moving onto applications in real-world energy systems, demonstrating the connection between fundamental concepts and theoretical analysis, modelling, application, and design. Topics gradually increase in complexity, nurturing student confidence as they build towards the use of advanced concepts and models for low to zero carbon energy conversion systems. The textbook covers conventional and emerging renewable energy conversion systems, including efficient fuel cells, carbon capture cycles, biomass utilisation, geothermal and solar thermal systems, hydrogen and low-carbon fuels. Featuring numerous worked examples, over 100 multi-component homework problems, and online instructor resources including lecture slides, solutions, and sample term projects, this textbook is the perfect teaching resource for an advanced undergraduate and graduate-level course in energy conversion engineering.

Download or read book Greenhouse Gas Control Technologies written by CAJ Paulson and published by CSIRO PUBLISHING. This book was released on 2001-04-23 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of greenhouse gas emissions continues to be a major global problem. It is inter-disciplinary, both in substance and approach, and covers technical, political and economic issues involving governments, industry and the scientific community. These proceedings contain 220 papers presented at the 5th International Conference on Greenhouse Gas Control Technologies (GHGT-5) held in August 2000 at Cairns, Queensland, Australia. The papers cover the capture of carbon dioxide, geological storage of carbon dioxide, ocean storage of carbon dioxide, storage of carbon dioxide with enhanced hydrocarbon recovery, utilisation of carbon dioxide, other greenhouse gases, fuel cells, alternative energy carriers, energy efficiency, life cycle assessments and energy modelling, economics, international and national policy, trading and accounting policy, social and community issues, and reducing emission from industry and power generation.

Download or read book Developments and Innovation in Carbon Dioxide CO2 Capture and Storage Technology written by M. Mercedes Maroto-Valer and published by Elsevier. This book was released on 2010-06-21 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries. Foreword written by Lord Oxburgh, Climate Science Peer Reviews the economics, regulation and planning of carbon capture and storage for power plants and industry Explores developments in combustion processes and technologies for CO2 capture in power plants

Download or read book Advances and Technology Development in Greenhouse Gases Emission Capture and Conversion written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-07-20 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion is a comprehensive seven-volume set of books that discusses the composition and properties of greenhouse gases, and introduces different sources of greenhouse gases emission and the relation between greenhouse gases and global warming. The comprehensive and detailed presentation of common technologies as well as novel research related to all aspects of greenhouse gases makes this work an indispensable encyclopedic resource for researchers in academia and industry.Volume 4 titled Carbon Capture Technologies is devoted to efficient technologies utilized for separation that are the heart of controlling carbon-made greenhouse gases (GHGs). The book starts with a review of carbon capture concepts with a focus on energy penalties as well as the operating pilots and plants followed by a meticulous investigation of different classes of capture methods. Section 2 surveys the absorption process including amines, physical absorbents, alkaline solvents, ionic liquids and deep eutectic solvents, nanoparticle-enhanced solvents, as well as a number of novel materials and structures, that are employed to eliminate GHGs utilizing absorption. Section 3 addresses adsorption-based strategies with a focus on the role of different solid adsorbents, introduces technologies that benefit from membranes, and considers different materials utilized in the fabrication of membranes. The final section deals with other as state-of-the-art alternatives in carbon capture. Moreover, each section reviews the economic assessments and environmental challenges. - Introduces carbon capture concepts and challenges - Describes various absorption and adsorption processes for carbon capture - Includes various membrane technologies for carbon capture

Download or read book Hydrogen and Syngas Production and Purification Technologies written by Ke Liu and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the timely topic of fuel cells and hydrogen-based energy from its fundamentals to practical applications Serves as a resource for practicing researchers and as a text in graduate-level programs Tackles crucial aspects in light of the new directions in the energy industry, in particular how to integrate fuel processing into contemporary systems like nuclear and gas power plants Includes homework-style problems

Download or read book Clean Combustion Technologies written by Maria da Graca Carvalho and published by CRC Press. This book was released on 1999-05-11 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventy-five refereed papers in this volume represent the second in a series of biannual benchmarks for technologies that maximize energy conversion while minimizing undesirable emissions. Covering the entire range of industrial and transport combustion as well as strategies for energy R&D, these state-of-the-art contributions will be indispensable to mechanical and chemical engineers in academia and industry, and technical personnel in military, energy, and environmental agencies of government

Download or read book Carbon Dioxide Capture for Storage in Deep Geologic Formations Results from the CO2 Capture Project written by David C Thomas and published by Elsevier. This book was released on 2016-06-03 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Capture for Storage in Deep Geologic Formations - Results from the CO2 Capture Project

Download or read book Advanced Power Cycles written by United States. Congress. Senate. Committee on Interior and Insular Affairs and published by . This book was released on 1972 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: