Download or read book X Ray Photoelectron Spectroscopy Principles Techniques and Applications written by Arpana Agrawal and published by . This book was released on 2023-12-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the book "X-Ray Photoelectron Spectroscopy: Principles, Techniques, and Applications" is to offer a thorough and in-depth investigation of X-ray photoelectron spectroscopy (XPS), a potent analytical technique that is widely applied in many scientific and technological disciplines. The kinetic energy and number of escaping electrons from the top few layers (up to 10 nm) of a material are simultaneously quantified to form an XPS spectrum when the sample is subjected to an X-ray beam for analytical purposes. The elemental composition, empirical formula, chemical state, and electronic state of the elements present in a material can all be ascertained using this highly surface-sensitive method. This book also describes the instrumentation of the XPS technique, its spectral interpretation, and various applications including the determination of the electronic band structures, Schottky barriers heights, analysis of various carbonaceous materials, chemical characterization of several biomaterials and polymers, applications in the field of art and archaeology and analysis of various biological systems.
Download or read book X ray Photoelectron Spectroscopy written by Paul van der Heide and published by John Wiley & Sons. This book was released on 2011-11-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers interested in the field of X-ray Photoelectron Spectroscopy (XPS) to the practical concepts in this field. The book first introduces the reader to the language and concepts used in this field and then demonstrates how these concepts are applied. Including how the spectra are produced, factors that can influence the spectra (all initial and final state effects are discussed), how to derive speciation, volume analysed and how one controls this (includes depth profiling), and quantification along with background substraction and curve fitting methodologies. This is presented in a concise yet comprehensive manner and each section is prepared such that they can be read independently of each other, and all equations are presented using the most commonly used units. Greater emphasis has been placed on spectral understanding/interpretation. For completeness sake, a description of commonly used instrumentation is also presented. Finally, some complementary surface analytical techniques and associated concepts are reviewed for comparative purposes in stand-alone appendix sections.
Download or read book Photoelectron Spectroscopy written by Stephan Hüfner and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author, S. Hüfner, presents an authoritative and up-to-date introduction to the field by comprehensively treating the electronic structures of atoms, molecules, solids, and surfaces. Brief descriptions are given of inverse photoemission, spin-polarized photoemission and photoelectron diffraction. Experimental aspects are considered throughout the third edition book and the results are carefully interpreted in terms of the theory. A wealth of measured data is presented in tabulator form for easy use by experimentalists. The reader will learn about the basic technique of photoemission spectroscopy and obtain the necessary background for work based on this book.
Download or read book Molten Salt Chemistry written by Gleb Mamantov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molten salts are of considerable significance to chemical technology. Applications range from the established ones, such as the production of aluminum, magnesium, sodium and fluorine, to those as yet to be fully exploited, such as molten salt batteries and fuel cells, catalysis, and solar energy. Molten salts are investigated for different purposes by many diverse techniques. There is a need to keep investigators working in different areas, such as metal production, power sources, and glass industry, aware of progress in various specialties, as well as to familiarize new research workers with the fundamental aspects of the broad field of molten salt _ chemistry. This volume constitutes the plenary lectures presented at the NATO Advanced Study Institute on Molten Salt Chemistry, Camerino, Italy, August 3-15, 1986. The fundamentals and several selected applications of molten salt chemistry were addressed. The major fundamental topics covered at this ASI were the structure of melts, thermodynamics of molten salt mixtures, theoretical and experimental studies of transport processes, metal-metal salt solutions, solvent properties of melt systems, acid-base effects in molten salt chemistry, electronic absorption, vibrational, and nuclear magnetic resonance spectroscopy of melt systems, electrochemistry and electroanalytical chemistry in molten salts, and organic chemistry in molten salts. The applied aspects of molten salt chemistry included the chemistry of aluminum production, electrodeposition using molten salts, and molten salt batteries and fuel cells.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-11-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Photoelectron Spectroscopy written by Stefan Hüfner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron Spectroscopy presents an up-to-date introduction to the field by comprehensively treating the electronic structures of atoms, molecules, solids, and surfaces. Brief descriptions are given of inverse photoemission, spin-polarized photoemission and photoelectron diffraction. Experimental aspects are considered throughout the book and the results are carefully interpreted in terms of the theory. A wealth of measured data is presented in tabulator form for easy use by experimentalists.
Download or read book Auger and X Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.
Download or read book Modern ESCAThe Principles and Practice of X Ray Photoelectron Spectroscopy written by Tery L. Barr and published by CRC Press. This book was released on 2020-11-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern ESCA: The Principles and Practice of X-Ray Photoelectron Spectroscopy is a unique text/reference that focuses on the branch of electron spectroscopy generally labeled as either Electron Spectroscopy for Chemical Analysis (ESCA) or X-ray Photoelectron Spectroscopy (XPS). The book emphasizes the use of core level and valence band binding energies, their shifts, and line widths. It describes the background, present status, and possible future uses of a number of recently developed branches of ESCA, including:
Download or read book Practical Surface Analysis Auger and X ray Photoelectron Spectroscopy written by D. Briggs and published by . This book was released on 1990-11-30 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this text is to present the background, the important concepts, and tabulated data of Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) in a practical context for those involved in applied surface analysis techniques.
Download or read book Surface Science Tools for Nanomaterials Characterization written by Challa S.S.R. Kumar and published by Springer. This book was released on 2015-03-10 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourth volume of a 40volume series on nano science and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Surface Science Tools for Nanomaterials Characterization. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book Hard X ray Photoelectron Spectroscopy HAXPES written by Joseph Woicik and published by Springer. This book was released on 2015-12-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first complete and up-to-date summary of the state of the art in HAXPES and motivates readers to harness its powerful capabilities in their own research. The chapters are written by experts. They include historical work, modern instrumentation, theory and applications. This book spans from physics to chemistry and materials science and engineering. In consideration of the rapid development of the technique, several chapters include highlights illustrating future opportunities as well.
Download or read book X ray Photoelectron Spectroscopy written by Johanna M. Wagner and published by . This book was released on 2011 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book X Ray Photoelectron Spectroscopy of Solid Surfaces written by V.I. Nefedov and published by CRC Press. This book was released on 2023-01-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume outlines the physical and methodical concepts of X-ray photoelectron spectroscopy (XPS) specifically for surface studies using both inner and valence electron levels. It discusses the theory and practice of XPS qualitative and quantitative analysis of solid state surfaces and provides lists of extended experimental and theoretical data necessary for the determination of concentration and thin film thicknesses. In addition it covers the many problems concerning in-depth profiling, ion sputtering rate and damages of the structure of altered layers, as well as applications of angular dependence of the intensities and photoelectron diffraction for surface studies. Also provided are the applications of XPS for the investigations of catalysts, adsorption, electronic surface states, oxydation of semi-conductors and alloys, minerals, including lunar regolith and natural gold, glasses, radiation damage, surface diffusion, polymers, etc.
Download or read book Handbook of Applied Solid State Spectroscopy written by D.R. Vij and published by Springer Science & Business Media. This book was released on 2007-02-15 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-State spectroscopy is a burgeoning field with applications in many branches of science, including physics, chemistry, biosciences, surface science, and materials science. This handbook brings together in one volume information about various spectroscopic techniques that is currently scattered in the literature of these disciplines. This concise yet comprehensive volume covers theory and applications of a broad range of spectroscopies. It provides an overview of sixteen spectroscopic technique and self-contained chapters present up-to-date scientific and technical information and references with minimal overlap and redundancy.
Download or read book Atomic and Molecular Spectroscopy written by Sune Svanberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging review of modern techniques in atomic and molecular spectroscopy. A brief description of atomic and molecular structure is followed by the relevant energy structure expressions. A discussion of radiative properties and the origin of spectra leads into coverage of X-ray and photoelectron spectroscopy, optical spectroscopy, and radiofrequency and microwave techniques. The treatment of laser spectroscopy investigates various tunable sources and a wide range of techniques characterized by high sensitivity and high resolution. Throughout this book, the relation between fundamental and applied aspects is shown, in particular by descriptions of applications to chemical analysis, photochemistry, surface characterisation, environmental and medical diagnostics, remote sensing and astrophysics.
Download or read book Applications Of X ray Photoelectron Spectroscopy To Catalytic Studies From Routine Analysis To Cutting edge Surface Characterization written by Spyridon Zafeiratos and published by World Scientific. This book was released on 2023-07-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray photoelectron spectroscopy (XPS) has become a standard practice technique, and automated XPS facilities can be found in industry and in universities all over the world. This transformed XPS from an advanced characterization method for dedicated research, to a rather standard analysis technique of surface analysis. The catalyst's surface state is probably the most prominent factor that influences the catalytic performance. It is therefore no surprise that XPS has become an indispensable tool in studies of solid catalysts. It has been directly used to investigate issues such as the surface composition of the active catalyst and reaction and deactivation mechanisms.The objective of this book is to provide a comprehensive overview of the current status and future perspectives of X-ray photoelectron spectroscopy dedicated to catalytic applications, including thermal catalysis, electrocatalysis, and photo(electro)catalysis. The book contains 13 chapters, starting with the necessary introduction of the technique background, including basic phenomena and instrumentation aspects. The second part of the book focuses on the presentation of long-established applications of the technique, such as XPS studies of model catalysts. Finally, the book describes relatively recent developments of this method for cutting-edge surface characterization mainly using synchrotron X-ray radiation.
Download or read book Electron Spectroscopy written by C. R. Brundle and published by Mittal Publications. This book was released on 2002 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
