Download or read book World Scientific Handbook Of Organic Optoelectronic Devices Volumes 3 4 written by and published by World Scientific. This book was released on 2022-04-08 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic (opto)electronic materials have received considerable attention due to their applications in perovskite and flexible electronics, OPVs and OLEDs and many others. Reflecting the rapid growth in research and development of organic (opto)electronic materials over the last few decades, World Scientific Handbook of Organic Optoelectronic Devices provides a comprehensive coverage of the state-of-the-art in an accessible format. It presents the most widely recognized fundamentals, principles, and mechanisms along with representative examples, key experimental data, and over 200 illustrative figures.

Download or read book World Scientific Handbook Of Organic Optoelectronic Devices Volumes 1 2 written by and published by World Scientific. This book was released on 2018-06-29 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic (opto)electronic materials have received considerable attention due to their applications in perovskite and flexible electronics, OPVs and OLEDs and many others. Reflecting the rapid growth in research and development of organic (opto)electronic materials over the last few decades, this book provides a comprehensive coverage of the state of the art in an accessible format. It presents the most widely recognized fundamentals, principles, and mechanisms along with representative examples, key experimental data, and over 200 illustrative figures.

Download or read book Theory And Methods Of Photovoltaic Material Characterization Optical And Electrical Measurement Techniques written by Richard K Ahrenkiel and published by World Scientific. This book was released on 2019-02-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an extensive review of the theory of transport and recombination properties in semiconductors. The emphasis is placed on electrical and optical techniques. There is a presentation of the latest experimental and theoretical techniques used to analyze minority-carrier lifetime. The relevant hardware and instrumentation are described. The newest techniques of lifetime mapping are presented. The issues are discussed relating to effects that mask carrier lifetime in certain device structures. The discrepancy between photoconductive and photoluminescence measurement results are analyzed.

Download or read book World Scientific Reference Of Amorphous Materials The Structure Properties Modeling And Main Applications In 3 Volumes written by and published by World Scientific. This book was released on 2020-12-28 with total page 1548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous solids (including glassy and non-crystalline solids) are ubiquitous since the vast majority of solids naturally occurring in our world are amorphous. Although the field is diverse and complex, this three-volume set covers the vast majority of the important concepts needed to understand these materials and their principal practical applications. One volume discusses the most important subset of amorphous insulators, namely oxide glasses; the other two volumes discuss the most important subsets of amorphous semiconductors, namely tetrahedrally coordinated amorphous semiconductors and amorphous and glassy chalcogenides. Together these three volumes provide a comprehensive set of theoretical concepts and practical information needed to become conversant in the field of amorphous materials. They are suitable for advanced graduate students, postdoctoral research associates, and researchers wishing to change fields or sub-fields.The topics covered in these three volumes include (1) concepts for understanding the structures of amorphous materials, (2) techniques to characterize the structural, electronic, and optical properties of amorphous materials, (3) the roles of defects in affecting the electronic and optical properties of amorphous materials, and (4) the concepts for understanding practical devices and other applications of amorphous materials. Applications discussed in these volumes include transistors, solar cells, displays, bolometers, fibers, non-volatile memories, vidicons, photoresists, and optical disks.

Download or read book Handbook Of Porous Materials Synthesis Properties Modeling And Key Applications In 4 Volumes written by and published by World Scientific. This book was released on 2020-10-20 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume handbook gives a state-of-the-art overview of porous materials, from synthesis and characterization and simulation all the way to manufacturing and industrial applications. The editors, coming from academia and industry, are known for their didactic skills as well as their technical expertise. Coordinating the efforts of 37 expert authors in 14 chapters, they construct the story of porous carbons, ceramics, zeolites and polymers from varied viewpoints: surface and colloidal science, materials science, chemical engineering, and energy engineering. Volumes 1 and 2 cover the fundamentals of preparation, characterisation, and simulation of porous materials. Working from the fundamentals all the way to the practicalities of industrial production processes, the subjects include hierarchical materials, in situ and operando characterisation using NMR, X-Ray scattering and tomography, state-of-the-art molecular simulations of adsorption and diffusion in crystalline nanoporous materials, as well as the emerging areas of bio-artificing and drug delivery. Volume 3 focuses on porous materials in industrial separation applications, including adsorption separation, membrane separation, and osmotic distillation. Finally, and highly relevant to tomorrow's energy challenges, Volume 4 explains the energy engineering aspects of applying porous materials in supercapacitors, fuel cells, batteries, electrolysers and sub-surface energy applications.The text contains many high-quality colourful illustrations and examples, as well as thousands of up-to-date references to peer-reviewed articles, reports and websites for further reading. This comprehensive and well-written handbook is a must-have reference for universities, research groups and companies working with porous materials.Related Link(s)

Download or read book Hybrid Organic Inorganic Perovskites Physical Properties And Applications In 4 Volumes written by and published by World Scientific. This book was released on 2022-01-07 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume handbook gives a state-of-the-art overview of hybrid organic inorganic perovskites, both two dimensional (2D) and three dimensional (3D), from synthesis and characterization and simulation to optoelectronic devices (such as solar cells and light emitting diodes), spintronics devices and catalysis application. The editors, coming from academia and national laboratory, are known for their didactic skills as well as their technical expertise. Coordinating the efforts of 30 expert authors in 21 chapters, they construct the story of hybrid perovskite structural and optical properties, electronic and spintronic response, laser action, and catalysis from varied viewpoints: materials science, chemical engineering, and energy engineering. The four volumes are arranged according to the focus material properties. Volume 1 is focused on the material physical properties including structure, deposition characteristic and the structure of the electronic bands and excitons of these compounds. Volume 2 covers the hybrid perovskite optical properties including the ultrafast optical response, photoluminescence and laser action. Volume 3 contains the spin response of these compounds including application such as spin valves, photogalvanic effect, and magnetic response of light emitting diodes and solar cell devices. Finally, and highly relevant to tomorrow's energy challenges, volume 4 is focused on the physics and device properties of the most relevant applications of the hybrid perovskites, namely photovoltaic solar cells. The text contains many high-quality colorful illustrations and examples, as well as thousands of up-to-date references to peer-reviewed articles, reports and websites for further reading. This comprehensive and well-written handbook is a must-have reference for universities, research groups and companies working with the hybrid organic inorganic perovskites.

Download or read book Handbook of Optoelectronics written by John P. Dakin and published by CRC Press. This book was released on 2017-10-05 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Optoelectronics offers a self-contained reference from the basic science and light sources to devices and modern applications across the entire spectrum of disciplines utilizing optoelectronic technologies. This second edition gives a complete update of the original work with a focus on systems and applications. Volume I covers the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials with brand new chapters on silicon photonics, nanophotonics, and graphene optoelectronics. Volume II addresses the underlying system technologies enabling state-of-the-art communications, imaging, displays, sensing, data processing, energy conversion, and actuation. Volume III is brand new to this edition, focusing on applications in infrastructure, transport, security, surveillance, environmental monitoring, military, industrial, oil and gas, energy generation and distribution, medicine, and free space. No other resource in the field comes close to its breadth and depth, with contributions from leading industrial and academic institutions around the world. Whether used as a reference, research tool, or broad-based introduction to the field, the Handbook offers everything you need to get started. John P. Dakin, PhD, is professor (emeritus) at the Optoelectronics Research Centre, University of Southampton, UK. Robert G. W. Brown, PhD, is chief executive officer of the American Institute of Physics and an adjunct full professor in the Beckman Laser Institute and Medical Clinic at the University of California, Irvine.

Download or read book Polymers in Organic Electronics written by Sulaiman Khalifeh and published by Elsevier. This book was released on 2020-04-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers in Organic Electronics: Polymer Selection for Electronic, Mechatronic, and Optoelectronic Systems provides readers with vital data, guidelines, and techniques for optimally designing organic electronic systems using novel polymers. The book classifies polymer families, types, complexes, composites, nanocomposites, compounds, and small molecules while also providing an introduction to the fundamental principles of polymers and electronics. Features information on concepts and optimized types of electronics and a classification system of electronic polymers, including piezoelectric and pyroelectric, optoelectronic, mechatronic, organic electronic complexes, and more. The book is designed to help readers select the optimized material for structuring their organic electronic system.Chapters discuss the most common properties of electronic polymers, methods of optimization, and polymeric-structured printed circuit boards. The polymeric structures of optoelectronics and photonics are covered and the book concludes with a chapter emphasizing the importance of polymeric structures for packaging of electronic devices. - Provides key identifying details on a range of polymers, micro-polymers, nano-polymers, resins, hydrocarbons, and oligomers - Covers the most common electrical, electronic, and optical properties of electronic polymers - Describes the underlying theories on the mechanics of polymer conductivity - Discusses polymeric structured printed circuit boards, including their rapid prototyping and optimizing their polymeric structures - Shows optimization methods for both polymeric structures of organic active electronic components and organic passive electronic components

Download or read book Handbook of Organic Materials for Optical and Opto Electronic Devices written by Oksana Ostroverkhova and published by Elsevier. This book was released on 2013-08-31 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small molecules and conjugated polymers, the two main types of organic materials used for optoelectronic and photonic devices, can be used in a number of applications including organic light-emitting diodes, photovoltaic devices, photorefractive devices and waveguides. Organic materials are attractive due to their low cost, the possibility of their deposition from solution onto large-area substrates, and the ability to tailor their properties. The Handbook of organic materials for optical and (opto)electronic devices provides an overview of the properties of organic optoelectronic and nonlinear optical materials, and explains how these materials can be used across a range of applications.Parts one and two explore the materials used for organic optoelectronics and nonlinear optics, their properties, and methods of their characterization illustrated by physical studies. Part three moves on to discuss the applications of optoelectronic and nonlinear optical organic materials in devices and includes chapters on organic solar cells, electronic memory devices, and electronic chemical sensors, electro-optic devices.The Handbook of organic materials for optical and (opto)electronic devices is a technical resource for physicists, chemists, electrical engineers and materials scientists involved in research and development of organic semiconductor and nonlinear optical materials and devices. - Comprehensively examines the properties of organic optoelectronic and nonlinear optical materials - Discusses their applications in different devices including solar cells, LEDs and electronic memory devices - An essential technical resource for physicists, chemists, electrical engineers and materials scientists

Download or read book World Scientific Handbook of Organic Optoelectronic Devices Volumes 3 4 written by Franky So and published by Materials and Energy. This book was released on 2022-06-12 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic (opto)electronic materials have received considerable attention due to their applications in perovskite and flexible electronics, OPVs and OLEDs and many others. Reflecting the rapid growth in research and development of organic (opto)electronic materials over the last few decades, World Scientific Handbook of Organic Optoelectronic Devices provides a comprehensive coverage of the state-of-the-art in an accessible format. It presents the most widely recognized fundamentals, principles, and mechanisms along with representative examples, key experimental data, and over 200 illustrative figures.

Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics.

Download or read book Electrically Driven Quantum Dot Based Single Photon Sources written by Markus Kantner and published by Springer Nature. This book was released on 2020-01-25 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor quantum optics is on the verge of moving from the lab to real world applications. When stepping from basic research to new technologies, device engineers will need new simulation tools for the design and optimization of quantum light sources, which combine classical device physics with cavity quantum electrodynamics. This thesis aims to provide a holistic description of single-photon emitting diodes by bridging the gap between microscopic and macroscopic modeling approaches. The central result is a novel hybrid quantum-classical model system that self-consistently couples semi-classical carrier transport theory with open quantum many-body systems. This allows for a comprehensive description of quantum light emitting diodes on multiple scales: It enables the calculation of the quantum optical figures of merit together with the simulation of the spatially resolved current flow in complex, multi-dimensional semiconductor device geometries out of one box. The hybrid system is shown to be consistent with fundamental laws of (non-)equilibrium thermodynamics and is demonstrated by numerical simulations of realistic devices.

Download or read book Defects In Functional Materials written by Chi-chung Francis Ling and published by World Scientific. This book was released on 2020-08-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research of functional materials has attracted extensive attention in recent years, and its advancement nitrifies the developments of modern sciences and technologies like green sciences and energy, aerospace, medical and health, telecommunications, and information technology. The present book aims to summarize the research activities carried out in recent years devoting to the understanding of the physics and chemistry of how the defects play a role in the electrical, optical and magnetic properties and the applications of the different functional materials in the fields of magnetism, optoelectronic, and photovoltaic etc.

Download or read book Organic Nanostructured Thin Film Devices and Coatings for Clean Energy written by Sam Zhang and published by CRC Press. This book was released on 2010-06-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by leading experts from around the world, the three-volume Handbook of Nanostructured Thin Films and Coatings gives scientific researchers and product engineers a resource as dynamic and flexible as the field itself. The first two volumes cover the latest research and application of the mechanical and functional properties of thin films an

Download or read book Handbook of Advanced Electronic and Photonic Materials and Devices Ten Volume Set written by Hari Singh Nalwa and published by Academic Press. This book was released on 2000-10-09 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol. 1: Semiconductors;Vol. 2: Semiconductors Devices;Vol. 3: High-Tc Superconductors and Organic Conductors; Vol. 4: Ferroelectrics and Dielectrics; Vol. 5: Chalcogenide Glasses and Sol-Gel Materials; Vol. 6 Nanostructured Materials; Vol. 7: Liquid Crystals, Display and Laser Materials; Vol. 8: Conducting Polymers; Vol. 9: Nonlinear Optical Materials; Volume 10: Light-Emitting Diodes, Lithium Batteries and Polymer Devices

Download or read book Organic Optoelectronic Materials written by Yongfang Li and published by Springer. This book was released on 2015-05-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews the latest trends in organic optoelectronic materials. Each comprehensive chapter allows graduate students and newcomers to the field to grasp the basics, whilst also ensuring that they have the most up-to-date overview of the latest research. Topics include: organic conductors and semiconductors; conducting polymers and conjugated polymer semiconductors, as well as their applications in organic field-effect-transistors; organic light-emitting diodes; and organic photovoltaics and transparent conducting electrodes. The molecular structures, synthesis methods, physicochemical and optoelectronic properties of the organic optoelectronic materials are also introduced and described in detail. The authors also elucidate the structures and working mechanisms of organic optoelectronic devices and outline fundamental scientific problems and future research directions. This volume is invaluable to all those interested in organic optoelectronic materials.

Download or read book World Scientific Reference On Spin In Organics In 4 Volumes written by Zeev Valy Vardeny and published by World Scientific. This book was released on 2017-12-27 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work on Spin in Organics contains four volumes dedicated to spin injection, spin transport, spin pumping, organic magnetic field effect, and molecular spintronics. The field of Organic Spintronics has accelerated and matured in the last dozen years with the realization of an organic spin-valve (in 2004) and magneto-resistance and magneto-electroluminescence in organic optoelectronic devices (2006).The book series is comprehensive in that it summarizes all aspects of Organic Spintronics to date. The first two volumes deal with spin injection, spin transport, spin manipulation and spin pumping into organic semiconductors. The main device that is thoroughly discussed here is the organic spin-valve, where spinterface states at the interface between the organic semiconductor and the ferromagnetic (FM) electrode has been the focus of many chapters. An interesting emerging subject is the role of chirality in the organic layer of the device. A relatively new method of achieving spin aligned carriers in organic semiconductors is spin pumping, where magnons in the FM substrate generate spin aligned carriers in the organic layer at the FM/organic interface.The third volume deals mainly with magnetic field effect in organic devices. Several spin-mixture processes that lead to magnetic field effect in devices and films are thoroughly discussed, such as hyperfine interaction, direct spin-orbit coupling, indirect spin-orbit coupling via Δg, triplet-triplet annihilation, and thermal spin alignment. The similarity between the magnetic field effect obtained in optoelectronic devices based on organic semiconductors and the novel hybrid organic-inorganic semiconductors is also a subject of intense interest. The fourth volume deals with spin in molecular films and devices. It includes thorough discussion of spin exchange interaction that leads to organic ferromagnets, as well as manifestation of various spin interactions in thin molecular films and devices.