Download or read book Worked Examples in X Ray Analysis written by JENKINS and published by Springer. This book was released on 2013-12-20 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide the reader with a series of work ed examples in X -ray spectrometry and X -ray diffractometry, in such a way that each example can be treated either as a posed question, i. e. one to which the reader must himself provide an answer, or as a guide to the method of treating a similar problem. The latter, of course, also pro vides a check on the answer produced by the reader. Although much basic theory can be derived by study of this work the first intention of the book is not to provide a source of basic theoretical knowledge in X -ray analy sis. It is hoped that the book will be utilized more as a guide line in the tackling of theoretical and practical problems and as a means of estab lishing whether or not the reader is able to work out for himself a certain type of problem. For example, the series of examples on counting statis tics has been chosen in such a way that after working through and under standing these, the reader should be able to handle most of the calculations that he is likely to come up against in this area.
Download or read book X Ray Diffraction Crystallography written by Yoshio Waseda and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray diffraction crystallography for powder samples is a well-established and widely used method. It is applied to materials characterization to reveal the atomic scale structure of various substances in a variety of states. The book deals with fundamental properties of X-rays, geometry analysis of crystals, X-ray scattering and diffraction in polycrystalline samples and its application to the determination of the crystal structure. The reciprocal lattice and integrated diffraction intensity from crystals and symmetry analysis of crystals are explained. To learn the method of X-ray diffraction crystallography well and to be able to cope with the given subject, a certain number of exercises is presented in the book to calculate specific values for typical examples. This is particularly important for beginners in X-ray diffraction crystallography. One aim of this book is to offer guidance to solving the problems of 90 typical substances. For further convenience, 100 supplementary exercises are also provided with solutions. Some essential points with basic equations are summarized in each chapter, together with some relevant physical constants and the atomic scattering factors of the elements.
Download or read book Worked Examples in X ray Analysis written by R. Jenkins and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Worked Examples in X Ray Analysis written by R. Jenkins and published by . This book was released on 2014-09-01 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Worked Examples in X ray Analysis written by Ron Jenkins and published by . This book was released on 1974 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Worked examples in X ray analysis written by Ron Jenkins and published by . This book was released on 1971 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Simulation Tools for X ray Analysis written by Sérgio Luiz Morelhão and published by Springer. This book was released on 2015-10-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the users on how to construct a library of routines to simulate scattering and diffraction by almost any kind of samples. The main goal of this book is to break down the huge barrier of difficulties faced by beginners from many fields (Engineering, Physics, Chemistry, Biology, Medicine, Material Science, etc.) in using X-rays as an analytical tool in their research. Besides fundamental concepts, MatLab routines are provided, showing how to test and implement the concepts. The major difficult in analysing materials by X-ray techniques is that it strongly depends on simulation software. This book teaches the users on how to construct a library of routines to simulate scattering and diffraction by almost any kind of samples. It provides to a young student the knowledge that would take more than 20 years to acquire by working on X-rays and relying on the available textbooks. The scientific productivity worldwide is growing at a breakneck pace, demanding ever more dynamic approaches and synergies between different fields of knowledge. To master the fundamentals of X-ray physics means the opportunity of working at an infiniteness of fields, studying systems where the organizational understanding of matter at the atomic scale is necessary. Since the discovery of X radiation, its usage as investigative tool has always been under fast expansion afforded by instrumental advances and computational resources. Developments in medical and technological fields have, as one of the master girders, the feasibility of structural analysis offered by X-rays. One of the major difficulties faced by beginners in using this fantastic tool lies in the analysis of experimental data. There are only few cases where it is possible to extract structural information directly from experiments. In most cases, structure models and simulation of radiation-matter interaction processes are essential. The advent of intense radiation sources and rapid development of nanotechnology constantly creates challenges that seek solutions beyond those offered by standard X-ray techniques. Preparing new researchers for this scenario of rapid and drastic changes requires more than just teaching theories of physical phenomena. It also requires teaching of how to implement them in a simple and efficient manner. In this book, fundamental concepts in applied X-ray physics are demonstrated through available computer simulation tools. Using MatLab, more than eighty routines are developed for solving the proposed exercises, most of which can be directly used in experimental data analysis. Therefore, besides X-ray physics, this book offers a practical programming course in modern high-level language, with plenty of graphic and mathematical tools.
Download or read book Chest X Ray Made Easy E Book written by Jonathan Corne and published by Elsevier Health Sciences. This book was released on 2015-06-26 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This popular guide to the examination and interpretation of chest radiographs is an invaluable aid for medical students, junior doctors, nurses, physiotherapists and radiographers. Translated into over a dozen languages, this book has been widely praised for making interpretation of the chest X-ray as simple as possible The chest X-ray is often central to the diagnosis and management of a patient. As a result every doctor requires a thorough understanding of the common radiological problems. This pocketbook describes the range of conditions likely to be encountered on the wards and guides the reader through the diagnostic process based on the appearance of the abnormality shown. - Covers the full range of common radiological problems. - Includes valuable advice on how to examine an X-ray. - Assists the doctor in determining the nature of the abnormality. - Points the clinician towards a possible differential diagnosis. - A larger page size allows for larger and clearer illustrations. - A new chapter on the sick patient covers the patient on ITU and the appearance of lines and tubes. - There is extended use of CT imaging with advice on choosing modalities depending on the clinical circumstances. - A new section of chest x-ray problems incorporates particularly challenging case histories. - The international relevance of the text has been expanded with additional text and images.
Download or read book X Ray Diffraction written by C. Suryanarayana and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this, the only book available to combine both theoretical and practical aspects of x-ray diffraction, the authors emphasize a "hands on" approach through experiments and examples based on actual laboratory data. Part I presents the basics of x-ray diffraction and explains its use in obtaining structural and chemical information. In Part II, eight experimental modules enable the students to gain an appreciation for what information can be obtained by x-ray diffraction and how to interpret it. Examples from all classes of materials -- metals, ceramics, semiconductors, and polymers -- are included. Diffraction patterns and Bragg angles are provided for students without diffractometers. 192 illustrations.
Download or read book Medical Imaging Systems written by Andreas Maier and published by Springer. This book was released on 2018-08-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.
Download or read book Advances in X Ray Analysis written by Gavin R. Mallett and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented in this volume of Advances in X-Ray Analysis were chosen from those presented at the Fourteenth Annual Conference on the Applications of X-Ray Analysis. This conference, sponsored by the Metallurgy Division of the Denver Research Institute, University of Denver, was held on August 24,25, and 26, 1965, at the Albany Hotel in Denver, Colorado. Of the 56 papers presented at the conference, 46 are included in this volume; also included is an open discussion held on the effects of chemical com bination on X-ray spectra. The subjects presented represent a broad scope of applications of X-rays to a variety of fields and disciplines. These included such fields as electron-probe microanalysis, the effect of chemical combination on X-ray spectra, and the uses of soft and ultrasoft X-rays in emission analysis. Also included were sessions on X-ray diffraction and fluor escence analysis. There were several papers on special topics, including X-ray topography and X-ray absorption fine-structure analysis. William L. Baun contributed considerable effort toward the conference by organizing the session on the effect of chemical combination on X-ray spectra fine structure. A special session was established through the excellent efforts of S. P. Ong on the uses and applica tions of soft X-rays in fluorescent analysis. We offer our sincere thanks to these men, for these two special sessions contributed greatly to the success of the conference.
Download or read book Worked Examples in X ray Analysis written by John L. de Vries and published by . This book was released on 1971 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Design X Rays written by Adam Tornhill and published by Pragmatic Bookshelf. This book was released on 2018-03-08 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you working on a codebase where cost overruns, death marches, and heroic fights with legacy code monsters are the norm? Battle these adversaries with novel ways to identify and prioritize technical debt, based on behavioral data from how developers work with code. And that's just for starters. Because good code involves social design, as well as technical design, you can find surprising dependencies between people and code to resolve coordination bottlenecks among teams. Best of all, the techniques build on behavioral data that you already have: your version-control system. Join the fight for better code! Use statistics and data science to uncover both problematic code and the behavioral patterns of the developers who build your software. This combination gives you insights you can't get from the code alone. Use these insights to prioritize refactoring needs, measure their effect, find implicit dependencies between different modules, and automatically create knowledge maps of your system based on actual code contributions. In a radical, much-needed change from common practice, guide organizational decisions with objective data by measuring how well your development teams align with the software architecture. Discover a comprehensive set of practical analysis techniques based on version-control data, where each point is illustrated with a case study from a real-world codebase. Because the techniques are language neutral, you can apply them to your own code no matter what programming language you use. Guide organizational decisions with objective data by measuring how well your development teams align with the software architecture. Apply research findings from social psychology to software development, ensuring you get the tools you need to coach your organization towards better code. If you're an experienced programmer, software architect, or technical manager, you'll get a new perspective that will change how you work with code. What You Need: You don't have to install anything to follow along in the book. TThe case studies in the book use well-known open source projects hosted on GitHub. You'll use CodeScene, a free software analysis tool for open source projects, for the case studies. We also discuss alternative tooling options where they exist.
Download or read book Theory of XRF getting acquainted with the principles written by Peter Brouwer and published by . This book was released on 2006 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book Applications of X ray Analysis to the Study of Physical Problems written by J. D. Hanawalt and published by . This book was released on 1928 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Applications of X Ray Diffraction written by Frank Smith and published by CRC Press. This book was released on 1999-09-22 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: By illustrating a wide range of specific applications in all major industries, this work broadens the coverage of X-ray diffraction beyond basic tenets, research and academic principles. The book serves as a guide to solving problems faced everyday in the laboratory, and offers a review of the current theory and practice of X-ray diffraction, major advances and potential uses.
