Download or read book Worked Examples for the Design of Concrete Structures to Eurocode 2 written by Tony Threlfall and published by CRC Press. This book was released on 2013-06-20 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be unfamiliar with Eurocode 2. Chapter 1 provides an introduction to the Structural Eurocodes, with particular reference to actions on structures. Chapter 2 describes the principles, requirements and methods used for the design of members. This is followed by worked examples for the following structures: A multi-storey office building with three forms of floor construction A basement to the office building with three types of foundations A free-standing cantilever earth-retaining wall A large underground service reservoir An open-top rectangular tank on an elastic soil An open-top cylindrical tank on an elastic soil In addition to the design of all the elements, the analysis of each structure is fully explained. This applies particularly to the design of the basement, and the tanks bearing on elastic soils, for which specially derived tables are included in appendices to the book. The calculations are complemented by reinforcement drawings in accordance with the recommendations in the third edition (2006) of the Standard method of detailing structural concrete, with commentaries on the bar arrangements. This book can be used as a stand-alone publication, or as a more detailed companion to Reynolds’s Reinforced Concrete Designer’s Handbook, now in its 11th edition. The comprehensive treatment of the designs, and the variety of structures considered, make this a unique and invaluable work.
Download or read book Reinforced Concrete Design to Eurocode 2 written by Giandomenico Toniolo and published by Springer. This book was released on 2017-05-09 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing. It presents a complete set of limit-state design criteria of the modern theory of RC incorporating principles and rules of the final version of the official Eurocode 2. This textbook examines methodological more than notional aspects of the presented topics, focusing on the verifications of assumptions, the rigorousness of the analysis and the consequent degree of reliability of results. Each chapter develops an organic topic, which is eventually illustrated by examples in each final paragraph containing the relative numerical applications. These practical end-of-chapter appendices and intuitive flow-charts ensure a smooth learning experience. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Design of Prestressed Concrete to Eurocode 2 Second Edition written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.
Download or read book Reinforced Concrete Design to Eurocodes written by Prab Bhatt and published by CRC Press. This book was released on 2014-02-28 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth edition of a bestselling textbook has been extensively rewritten and expanded in line with the current Eurocodes. It presents the principles of the design of concrete elements and of complete structures, with practical illustrations of the theory. It explains the background to the Eurocode rules and goes beyond the core topics to cover the design of foundations, retaining walls, and water retaining structures. The text includes more than sixty worked out design examples and more than six hundred diagrams, plans, and charts. It suitable for civil engineering courses and is a useful reference for practicing engineers.
Download or read book Reinforced Concrete with Worked Examples written by Franco Angotti and published by Springer Nature. This book was released on 2022-06-07 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the design of reinforced and prestressed concrete structures according to the latest advances both in the field of materials, concrete and steel, and in the field of structural analysis. These advances have been included in current version of Eurocode 2, which is taken as reference. All subjects are presented starting from their theoretical bases and passing to corresponding EC2 formulations. A large part of the book is concerned with the most innovative EC2 parts, like nonlinear structural analyses, second-order effects, punching and strut-and-tie models. The textbook is equipped with numerous worked examples, useful for the reader who is not familiar with the design of reinforced and prestressed concrete structures by the Limit State Method. Examples have been chosen among the most frequent cases of the professional practice. Thanks to this structure, it can be of interest both to structural designers for their professional training and to students of engineering and architecture schools for their studies. The volume contains twelve chapters, which follow the same structure of EC2, except for chapter 6 (dealing with prestressed concrete structures), which does not match any chapter of EC2, as prestressed concrete is considered in EC2 as a particular case of reinforced concrete, and corresponding formulations are shed over different chapters.
Download or read book Designers Handbook to Eurocode 2 written by A. W. Beeby and published by Thomas Telford. This book was released on 1995 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook aims to assist designers to apply Eurocode 2 by explaining the background to, and the intention of, the provisions indicating the most convenient design approaches, comparing the provisions with those in BS 8110 presenting design aids, charts and examples.
Download or read book Reinforced and Prestressed Concrete Design to EC2 written by Eugene Obrien and published by CRC Press. This book was released on 2017-09-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is an integral part of twenty-first century structural engineering, and an understanding of how to analyze and design concrete structures is a vital part of training as a structural engineer. With Eurocode legislation increasingly replacing British Standards, it’s also important to know how this affects the way you can work with concrete. Newly revised to Eurocode 2, this second edition retains the original’s emphasis on qualitative understanding of the overall behaviour of concrete structures. Now expanded, with a new chapter dedicated to case studies, worked examples, and exercise examples, it is an even more comprehensive guide to conceptual design, analysis, and detailed design of concrete structures. The book provides civil and structural engineering students with complete coverage of the analysis and design of reinforced and prestressed concrete structures. Great emphasis is placed on developing a qualitative understanding of the overall behaviour of structures.
Download or read book Reinforced Concrete Design written by W.H. Mosley and published by Red Globe Press. This book was released on 2012-04-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this text is to provide a straightforward introduction to the principles and methods of design for concrete structures. The theory and practice described are of fundamental nature and will be of use internationally.
Download or read book Precast Eurocode 2 written by R. S. Narayanan and published by . This book was released on 2008 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designers Guide to EN 1992 2 Eurocode 2 Design of Concrete Structures Part 2 Concrete Bridges written by Chris R Hendy and published by Thomas Telford. This book was released on 2007-01-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.
Download or read book Design of Prestressed Concrete to Eurocode 2 written by R. I. Gilbert and published by . This book was released on 2017 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009.
Download or read book Prestressed Concrete Design written by M.K. Hurst and published by CRC Press. This book was released on 2017-12-21 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully up to date with the developing Eurocode 2 Worked examples in spreadsheet format Practical and accessible text
Download or read book Worked Examples for the Design of Concrete Buildings written by A. W. BEEBY and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Worked Examples for the Design of Concrete Buildings written by A. W. Beeby and published by . This book was released on 1994 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides designers, familiar with BS 8110, with a guide to m eeting the requirements of Eurocode 2 and its national application document during the pre-standard or ENV period. It comprises 11 worked examples with commentary, and an appendix that includes design aids. The authors are from Ove Arup & Partners, S.B. Tietz and Partners and the British Cement Association.
Download or read book Designers Guide to Eurocode 4 Design of Composite Structures EN 1994 2 written by Chris R Hendy and published by Thomas Telford. This book was released on 2006-08-23 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.
Download or read book Designers Handbook to Eurocode 4 1 Design of composite steel and concrete structures written by Roger Paul Johnson and published by Thomas Telford. This book was released on 1993 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides detailed information for civil and structural engineers who want to use Eurocode 4; Part 1-1: Design of Composite and Steel Structures. This handbook provides technical information on the background to the Eurocode and explains the relationships with other Eurocodes, particularly the close interactions with Eurocode 2 and Eurocode 3.
Download or read book Composite Structures according to Eurocode 4 written by Darko Dujmovic and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of composite structures in construction is increasing. The optimized combination of the two materials concrete and steel produces particularly cost-efficient structures. This book presents a large number of numerical examples with detailed explanations of the provisions of Eurocode 4. It deals with the most common structural components in building construction: beams, columns and slabs. Furthermore, comprehensive chapters provide insight into the topics of creep and shrinkage, as well as fatigue. This book enables the reader to efficiently perform analyses of composite structures. It is a valuable reference book for professionals as well as an outstanding means for students to become familiar with the Eurocode 4.
