Download or read book Wireless Implantable Microsystem for Chronic Bladder Pressure Monitoring written by Steve J Majerus and published by . This book was released on 2014 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the design and testing of a wireless implantable bladder pressure sensor suitable for chronic implantation in humans. The sensor was designed to fulfill the unmet need for a chronic bladder pressure sensing device in urological fields such as urodynamics for diagnosis and neuromodulation for bladder control. Neuromodulation would particularly benefit from a wireless bladder pressure sensor providing real-time pressure feedback to an implanted stimulator, resulting in greater bladder capacity while using less power. The pressure sensing system consists of an implantable microsystem, an external RF receiver, and a wireless battery charger. The implant is small enough to be cystoscopically implanted within the bladder wall, where it is securely held and shielded from the urine stream, protecting both the device and the patient. The implantable microsystem consists of a custom application-specific integrated circuit (ASIC), pressure transducer, rechargeable battery, and wireless telemetry and recharging antennas. Because the battery capacity is extremely limited, the ASIC was designed using an ultra-low-power methodology in which power is dynamically allocated to instrumentation and telemetry circuits by a power management unit. A low-power regulator and clock oscillator set the minimum current draw at 7.5 μA and instrumentation circuitry is operated at low duty cycles to transmit 100-Hz pressure samples while consuming 74 μA. An adaptive transmission activity detector determines the minimum telemetry rate to limit broadcast of unimportant samples. Measured results indicated that the power management circuits produced an average system current of 16 μA while reducing the number of transmitted samples by more than 95% with typical bladder pressure signals. The wireless telemetry range of the system was measured to be 35 cm with a bit-error-rate of 10-3, and the battery was wirelessly recharged at distances up to 20 cm. A novel biocompatible packaging method consisting of a silicone-nylon mesh membrane and a compliant silicone gel was developed to protect the sensor from water ingress while only reducing the sensor sensitivity by 5%. Dynamic offset removal circuitry extended the system dynamic range to 2,900 cm H2O but limited the sensor AC accuracy to 3.7 cm H2O over a frequency range of 0.002 - 50 Hz. The DC accuracy of the sensor was measured to be approximately 2.6 cm H2O (0.9% full-scale). Functionality of wired prototypes was confirmed in feline and canine animal models, and wireless prototypes were implanted in a female calf large-animal model. Measured in vivo pressure recordings of bladder contractions correlated well with reference catheters (r =0.893-0.994).

Download or read book Implantable Biomedical Microsystems written by Swarup Bhunia and published by Elsevier. This book was released on 2015-01-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and innovation in areas such as circuits, microsystems, packaging, biocompatibility, miniaturization, power supplies, remote control, reliability, and lifespan are leading to a rapid increase in the range of devices and corresponding applications in the field of wearable and implantable biomedical microsystems, which are used for monitoring, diagnosing, and controlling the health conditions of the human body. This book provides comprehensive coverage of the fundamental design principles and validation for implantable microsystems, as well as several major application areas. Each component in an implantable device is described in details, and major case studies demonstrate how these systems can be optimized for specific design objectives. The case studies include applications of implantable neural signal processors, brain-machine interface (BMI) systems intended for both data recording and treatment, neural prosthesis, bladder pressure monitoring for treating urinary incontinence, implantable imaging devices for early detection and diagnosis of diseases as well as electrical conduction block of peripheral nerve for chronic pain management. Implantable Biomedical Microsystems is the first comprehensive coverage of bioimplantable system design providing an invaluable information source for researchers in Biomedical, Electrical, Computer, Systems, and Mechanical Engineering as well as engineers involved in design and development of wearable and implantable bioelectronic devices and, more generally, teams working on low-power microsystems and their corresponding wireless energy and data links. - First time comprehensive coverage of system-level and component-level design and engineering aspects for implantable microsystems. - Provides insight into a wide range of proven applications and application specific design trade-offs of bioimplantable systems, including several major case studies - Enables Engineers involved in development of implantable electronic systems to optimize applications for specific design objectives.

Download or read book The Development of Short and Long Term Continuous and Real Time in Situ Medical Pressure Sensors written by Robert Nien-Kuo Tan and published by . This book was released on 2012 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a push to modernize the technology used in patient monitoring. One area that is being investigated is the use of in situ sensors for real time, continuous vital signs monitoring, particularly to measure pressure. We developed two sensors fulfilling different roles. One is fully implantable and wireless for long term urological pressure monitoring using conventional MEMS technology. This sensor required the use of a battery-powered wireless transmitter. The second sensor utilizes an entirely new method of pressure sensing designed to be easily scaled down in size while being extremely cost effective. By using an electrolyte solution-filled elastic tube, the sensor does not require further packaging; also the materials used are easily obtainable commercially, so no custom components are required even when downsizing. Although initially designed and tested as a wired sensor, the new catheter sensor was designed to be integrated with wireless capability later--to create a truly minimally invasive long term pressure monitor. Both pressure sensing systems were developed by fabricating a pressure sensitive catheter lead, designing the electronics required to amplify and filter the sensor signal, programming the software client that received, stored, graphed, and interpreted the data. Furthermore, both sensors were subjected to extensive in vitro testing to characterize sensor performance and lifetime, as well as simulate an in vivo environment. Both sensors required the investigation of robust packaging techniques to ensure functionality and survivability while implanted. Last, both sensors demonstrated their potential use as a pressure monitor in animal studies: within the bladder for the wireless implantable sensor and as an intravascular sensor for the new conductometric design.

Download or read book A Wireless Microsystem for Continuous Measurement of Intraocular Pressure written by Woohyek Choi and published by . This book was released on 2006 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wireless Power Transfer for Electric Vehicles and Mobile Devices written by Chun T. Rim and published by John Wiley & Sons. This book was released on 2017-05-25 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: From mobile, cable-free re-charging of electric vehicles, smart phones and laptops to collecting solar electricity from orbiting solar farms, wireless power transfer (WPT) technologies offer consumers and society enormous benefits. Written by innovators in the field, this comprehensive resource explains the fundamental principles and latest advances in WPT and illustrates key applications of this emergent technology. Key features and coverage include: The fundamental principles of WPT to practical applications on dynamic charging and static charging of EVs and smartphones. Theories for inductive power transfer (IPT) such as the coupled inductor model, gyrator circuit model, and magnetic mirror model. IPTs for road powered EVs, including controller, compensation circuit, electro-magnetic field cancel, large tolerance, power rail segmentation, and foreign object detection. IPTs for static charging for EVs and large tolerance and capacitive charging issues, as well as IPT mobile applications such as free space omnidirectional IPT by dipole coils and 2D IPT for robots. Principle and applications of capacitive power transfer. Synthesized magnetic field focusing, wireless nuclear instrumentation, and future WPT. A technical asset for engineers in the power electronics, internet of things and automotive sectors, Wireless Power Transfer for Electric Vehicles and Mobile Devices is an essential design and analysis guide and an important reference for graduate and higher undergraduate students preparing for careers in these industries.

Download or read book Energy Harvesting and Energy Efficiency written by Nicu Bizon and published by Springer. This book was released on 2017-03-09 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents basic and advanced concepts for energy harvesting and energy efficiency, as well as related technologies, methods, and their applications. The book provides up-to-date knowledge and discusses the state-of-the-art equipment and methods used for energy harvesting and energy efficiency, combining theory and practical applications. Containing over 200 illustrations and problems and solutions, the book begins with overview chapters on the status quo in this field. Subsequent chapters introduce readers to advanced concepts and methods. In turn, the final part of the book is dedicated to technical strategies, efficient methods and applications in the field of energy efficiency, which also makes it of interest to technicians in industry. The book tackles problems commonly encountered using basic methods of energy harvesting and energy efficiency, and proposes advanced methods to resolve these issues. All the methods proposed have been validated through simulation and experimental results. These “hot topics” will continue to be of interest to scientists and engineers in future decades and will provide challenges to researchers around the globe as issues of climate change and changing energy policies become more pressing. Here, readers will find all the basic and advanced concepts they need. As such, it offers a valuable, comprehensive guide for all students and practicing engineers who wishing to learn about and work in these fields.

Download or read book A Wireless Microsystem for Multichannel Neural Recording Microprobes written by Hao Yu and published by . This book was released on 2004 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Neuroengineering written by Nitish V. Thakor and published by Springer Nature. This book was released on 2023-02-02 with total page 3686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook serves as an authoritative reference book in the field of Neuroengineering. Neuroengineering is a very exciting field that is rapidly getting established as core subject matter for research and education. The Neuroengineering field has also produced an impressive array of industry products and clinical applications. It also serves as a reference book for graduate students, research scholars and teachers. Selected sections or a compendium of chapters may be used as “reference book” for a one or two semester graduate course in Biomedical Engineering. Some academicians will construct a “textbook” out of selected sections or chapters. The Handbook is also meant as a state-of-the-art volume for researchers. Due to its comprehensive coverage, researchers in one field covered by a certain section of the Handbook would find other sections valuable sources of cross-reference for information and fertilization of interdisciplinary ideas. Industry researchers as well as clinicians using neurotechnologies will find the Handbook a single source for foundation and state-of-the-art applications in the field of Neuroengineering. Regulatory agencies, entrepreneurs, investors and legal experts can use the Handbook as a reference for their professional work as well.​

Download or read book Wireless Power Transfer for Medical Microsystems written by Tianjia Sun and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth introduction to the newest technologies for designing wireless power transfer systems for medical applications. The authors present a systematic classification of the various types of wireless power transfer, with a focus on inductive power coupling. Readers will learn to overcome many challenges faced in the design a wirelessly powered implant, such as power transfer efficiency, power stability, and the size of power antennas and circuits. This book focuses exclusively on medical applications of the technology and a batteryless capsule endoscopy system and other, real wirelessly powered systems are used as examples of the techniques described.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Body Sensor Networks written by Guang-Zhong Yang and published by Springer. This book was released on 2014-04-16 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has witnessed a rapid surge of interest in new sensing and monitoring devices for wellbeing and healthcare. One key development in this area is wireless, wearable and implantable in vivo monitoring and intervention. A myriad of platforms are now available from both academic institutions and commercial organisations. They permit the management of patients with both acute and chronic symptoms, including diabetes, cardiovascular diseases, treatment of epilepsy and other debilitating neurological disorders. Despite extensive developments in sensing technologies, there are significant research issues related to system integration, sensor miniaturisation, low-power sensor interface, wireless telemetry and signal processing. In the 2nd edition of this popular and authoritative reference on Body Sensor Networks (BSN), major topics related to the latest technological developments and potential clinical applications are discussed, with contents covering. Biosensor Design, Interfacing and Nanotechnology Wireless Communication and Network Topologies Communication Protocols and Standards Energy Harvesting and Power Delivery Ultra-low Power Bio-inspired Processing Multi-sensor Fusion and Context Aware Sensing Autonomic Sensing Wearable, Ingestible Sensor Integration and Exemplar Applications System Integration and Wireless Sensor Microsystems The book also provides a comprehensive review of the current wireless sensor development platforms and a step-by-step guide to developing your own BSN applications through the use of the BSN development kit.

Download or read book Implantable Sensors and Systems written by Guang-Zhong Yang and published by Springer. This book was released on 2018-03-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensing, whether used for transient or long-term monitoring of in vivo physiological, bio-electrical, bio-chemical and metabolic changes, is a rapidly advancing field of research and development. Underpinned by increasingly small, smart and energy efficient designs, they become an integral part of surgical prostheses or implants for both acute and chronic conditions, supporting optimised, context aware sensing, feedback, or stimulation with due consideration of system level impact. From sensor design, fabrication, on-node processing with application specific integrated circuits, to power optimisation, wireless data paths and security, this book provides a detailed explanation of both the theories and practical considerations of developing novel implantable sensors. Other topics covered by the book include sensor embodiment and flexible electronics, implantable optical sensors and power harvesting. Implantable Sensors and Systems – from Theory to Practice is an important reference for those working in the field of medical devices. The structure of the book is carefully prepared so that it can also be used as an introductory reference for those about to enter into this exciting research and developing field.

Download or read book Advances in Bioengineering written by Pier Andrea Serra and published by BoD – Books on Demand. This book was released on 2015-07-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological approach and the high level of innovation make bioengineering extremely dynamic and this forces researchers to continuous updating. It involves the publication of the results of the latest scientific research. This book covers a wide range of aspects and issues related to advances in bioengineering research with a particular focus on innovative technologies and applications. The book consists of 13 scientific contributions divided in four sections: Materials Science; Biosensors. Electronics and Telemetry; Light Therapy; Computing and Analysis Techniques.

Download or read book Neural Engineering written by Bin He and published by Springer Science & Business Media. This book was released on 2013-01-09 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural Engineering, 2nd Edition, contains reviews and discussions of contemporary and relevant topics by leading investigators in the field. It is intended to serve as a textbook at the graduate and advanced undergraduate level in a bioengineering curriculum. This principles and applications approach to neural engineering is essential reading for all academics, biomedical engineers, neuroscientists, neurophysiologists, and industry professionals wishing to take advantage of the latest and greatest in this emerging field.

Download or read book A History of Electrocardiography written by George Edward Burch and published by Norman Publishing. This book was released on 1990 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pelvic Floor Disorders written by Giulio A. Santoro and published by Springer Nature. This book was released on 2020-12-10 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent textbook provides up-to-date information on all aspects of pelvic floor disorders. After an opening section on anatomy and physiology, it explains the methodology, role and application of the integrated imaging approach in detail, including the most advanced 3D, 4D, and dynamic ultrasound techniques, illustrated with hundreds of images. It then discusses in depth the epidemiology, etiology, assessment, and management of the full range of pelvic floor disorders from multidisciplinary and practical perspectives. The book also provides information on the various forms of obstetric perineal trauma, urinary incontinence and voiding dysfunction, anal incontinence, pelvic organ prolapse, constipation and obstructed defecation, pelvic pain and sexual dysfunction, and fistulas, and includes treatment algorithms as well as helpful guidance on what to do when surgical treatment goes wrong. The authors are leading experts in the field from around the globe. Since the first edition from 2010 (more than 200,000 chapter downloads), the book has been extensively rewritten and features numerous additional topics. The result is a comprehensive textbook that is invaluable for gynecologists, colorectal surgeons, urologists, radiologists, and gastroenterologists, beginners and veterans alike.

Download or read book Emerging Technologies in Surgery written by Richard M. Satava and published by Springer Science & Business Media. This book was released on 2007-08-10 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the effects of emerging technologies on surgeons and surgical practice. The book opens with an overview of disruptive technologies, and their economic, scientific, ethical and social implications. Next comes a section describing how the Internet, virtual reality and simulation technology will change training and education. A section on Robotics covers computer-guided surgery, robotics and endoluminal therapies. Innovations in surgical instruments, including MEMS and Nanotechnology are outlined, as well. Next, the book reviews tissue engineering and artificial organs, genetic engineering, stem cells, emerging transplantation technologies and the brain-machine interface. A concluding section discusses ways of adapting to future technologies.