Download or read book Wire Position Monitoring with FPGA Based Electronics written by and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fall the first Tesla-style cryomodule cooldown test is being performed at Fermilab. Instrumentation department is preparing the electronics to handle the data from a set of wire position monitors (WPMs). For simulation purposes a prototype pipe with a WMP has been developed and built. The system is based on the measurement of signals induced in pickups by 320 MHz signal carried by a wire through the WPM. The wire is stretched along the pipe with a tensioning load of 9.07 kg. The WPM consists of four 50 [Omega] striplines spaced 90{sup o} apart. FPGA based digitizer scans the WPM and transmits the data to a PC via VME interface. The data acquisition is based on the PC running LabView. In order to increase the accuracy and convenience of the measurements some modifications were required. The first is implementation of an average and decimation filter algorithm in the integrator operation in the FPGA. The second is the development of alternative tool for WPM measurements in the PC. The paper describes how these modifications were performed and test results of a new design. The last cryomodule generation has a single chain of seven WPMs (placed in critical positions: at each end, at the three posts and between the posts) to monitor a cold mass displacement during cooldown. The system was developed in Italy in collaboration with DESY. Similar developments have taken place at Fermilab in the frame of cryomodules construction for SCRF research. This fall preliminary cryomodule cooldown test is being performed. In order to prepare an appropriate electronic system for the test a prototype pipe with a WMP has been developed and built, figure 1. The system is based on the measurement of signals induced in pickups by 320 MHz signal carried by a wire through the WPM. The 0.5 mm diameter Cu wire is stretched along the pipe with a tensioning load of 9.07 kg and has a length of 1.1 m. The WPM consists of four 50 [Omega] striplines spaced 90{sup o} apart. An FPGA based digitizer collects the WPM data and transmits it to the VME controller. The VME front-end processes the raw data to calculate positions and perform FFT. It is also provides the raw data to LabView running on a PC upon request. In order to increase the accuracy and convenience of the measurements some modifications were required. The first is connected with realization of average and decimation filter algorithm in the integrator operation in the FPGA. The second is connected with development of alternative tool for WPM measurements in the PC. We will discuss how these modifications were performed and test results of a new design.
Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book FPGA Based Embedded System Developer s Guide written by A. Arockia Bazil Raj and published by CRC Press. This book was released on 2018-04-09 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various aspects of VHDL programming and FPGA interfacing with examples and sample codes giving an overview of VLSI technology, digital circuits design with VHDL, programming, components, functions and procedures, and arithmetic designs followed by coverage of the core of external I/O programming, algorithmic state machine based system design, and real-world interfacing examples. • Focus on real-world applications and peripherals interfacing for different applications like data acquisition, control, communication, display, computing, instrumentation, digital signal processing and top module design • Aims to be a quick reference guide to design digital architecture in the FPGA and develop system with RTC, data transmission protocols
Download or read book Micro electronics Monitor written by and published by . This book was released on 1991 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of X ray and Gamma ray Astrophysics written by Cosimo Bambi and published by Springer Nature. This book was released on with total page 5912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Engineering and Informatics written by G. Izat Rashed and published by IOS Press. This book was released on 2024-04-11 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic engineering and informatics are disciplines which underpin the complex digital technology on which we have all now come to depend. This book presents the proceedings of ICEEI 2023, the 5th International Conference on Electronic Engineering and Informatics, which took place as a hybrid event from 23 to 25 June 2023 in Wuhan, China, with around 150 participating delegates. The conference brought together leading academics, researchers and practitioners from around the world to present recent innovations, trends, and concerns, and discuss practical challenges and solutions. It also gave delegates the opportunity to share their experience and research results and exchange views on all aspects of electronic engineering and informatics. A total of 266 submissions were received for the conference, of which 93 were accepted for presentation and publication after a careful double-blind peer review process. The papers are divided into 3 sections, covering electronic device simulation and system modelling; target recognition and information decision making; and network data processing and security detection. Providing a current overview of advances and research results in the relevant fields, the book will be of interest to those working in all areas of electronic engineering and informatics.
Download or read book Novel Algorithms and Techniques in Telecommunications Automation and Industrial Electronics written by Tarek Sobh and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Industrial Electronics, Technology and Automation, Telecommunications and Networking. Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes selected papers form the conference proceedings of the International Conference on Industrial Electronics, Technology and Automation (IETA 2007) and International Conference on Telecommunications and Networking (TeNe 07) which were part of the International Joint Conferences on Computer, Information and Systems Sciences and Engineering (CISSE 2007).
Download or read book Electronics System Design Techniques for Safety Critical Applications written by Luca Sterpone and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is exactly “Safety”? A safety system should be defined as a system that will not endanger human life or the environment. A safety-critical system requires utmost care in their specification and design in order to avoid possible errors in their implementation that should result in unexpected system’s behavior during his operating “life”. An inappropriate method could lead to loss of life, and will almost certainly result in financial penalties in the long run, whether because of loss of business or because the imposition of fines. Risks of this kind are usually managed with the methods and tools of the “safety engineering”. A life-critical system is designed to 9 lose less than one life per billion (10 ). Nowadays, computers are used at least an order of magnitude more in safety-critical applications compared to two decades ago. Increasingly electronic devices are being used in applications where their correct operation is vital to ensure the safety of the human life and the environment. These application ranging from the anti-lock braking systems (ABS) in automobiles, to the fly-by-wire aircrafts, to biomedical supports to the human care. Therefore, it is vital that electronic designers be aware of the safety implications of the systems they develop. State of the art electronic systems are increasingly adopting progr- mable devices for electronic applications on earthling system. In particular, the Field Programmable Gate Array (FPGA) devices are becoming very interesting due to their characteristics in terms of performance, dimensions and cost.
Download or read book X ray Photon Processing Detectors written by Conny Hansson and published by Springer Nature. This book was released on 2023-11-14 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers a good overview of some of most recent advances in the field of hybrid pixelated detectors for X-ray imaging. Coverage includes both technology and applications, with an in-depth review of the research topics conducted at leading research institutions in the world. The conversion of the X-ray signal into an analogue/digital value is discussed, as well as a review of CMOS chips used for X-ray image sensors. Applications of hybrid pixel detectors are discussed, such as medical imaging, high energy physics, space, non-destructive testing and security. Provides coverage of a broad range of topics, from international experts in academia and industry; Includes in-depth analysis of how to optimize X-ray detection and electronics for X-ray detection; Covers both technology and applications in a number of different domains.
Download or read book Harnessing VLSI System Design with EDA Tools written by Rajanish K. Kamat and published by Springer Science & Business Media. This book was released on 2011-10-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of VHDL, the reference material also grew in the same order. Today there is good amount of scholarly literature including many books describing various aspects of VHDL. However, an indepth review of these books reveals a different story. Many of them have emerged simply as an improved version of the manual. While some of them deal with the system design issues, they lack appropriate exemplifying to illustrate the concepts. Others give large number of examples, but lack the VLSI system design issues. In nutshell, the fact which gone unnoticed by most of the books, is the growth of the VLSI is not merely due to the language itself, but more due to the development of large number of third party tools useful from the FPGA or semicustom ASIC realization point of view. In the proposed book, the authors have synergized the VHDL programming with appropriate EDA tools so as to present a full proof system design to the readers. In this book along with the VHDL coding issues, the simulation and synthesis with the various toolsets enables the potential reader to visualize the final design. The VHDL design codes have been synthesized using different third party tools such as Xilinx Web pack Ver.11, Modelsim PE, Leonrado Spectrum and Synplify Pro. Mixed flow illustrated by using the above mentioned tools presents an insight to optimize the design with reference to the spatial, temporal and power metrics.
Download or read book IECON 01 written by IEEE Industrial Electronics Society. Conference and published by . This book was released on 2001 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book US Black Engineer IT written by and published by . This book was released on 1994 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Morgan Stanley and d a European Technology Atlas 2005 written by and published by d&a hi-tech information Ltd.. This book was released on with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Cities Power Electronics Renewable Energy and Internet of Things written by Ahteshamul Haque and published by CRC Press. This book was released on 2024-02-15 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the integration of power electronics, renewable energy, and the Internet of Things (IoT) from the perspective of smart cities in a single volume. The text will be helpful for senior undergraduate, graduate students and academic researchers in diverse engineering fields including electrical, electronics and communication, and computers. The book: Covers the integration of power electronics, energy harvesting, and the IoT for smart city applications Discusses concepts of power electronics and the IoT in electric vehicles for smart cities Examines the integration of power electronics in renewable energy for smart cities Discusses important concepts of energy harvesting including solar energy harvesting, maximum power point tracking (MPPT) controllers, and switch-mode power supplies (SMPS) Explores IoT connectivity technologies such as long-term evolution (LTE), narrow band NB-IoT, long-range (LoRa), Bluetooth, and ZigBee (IEEE Standard 802.15.4) for low data rate wireless personal communication applications The text provides the knowledge about applications, technologies, and standards of power electronics, renewable energy, and IoT for smart cities. It will serve as an ideal reference text for senior undergraduate, graduate students and academic researchers in the fields of electrical engineering, electronics and communication engineering, computer engineering, civil engineering, and environmental engineering.
Download or read book Instrumentation Reference Book written by Walt Boyes and published by Elsevier. This book was released on 2002-12-02 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation is not a clearly defined subject, having a 'fuzzy' boundary with a number of other disciplines. Often categorized as either 'techniques' or 'applications' this book addresses the various applications that may be needed with reference to the practical techniques that are available for the instrumentation or measurement of a specific physical quantity or quality. This makes it of direct interest to anyone working in the process, control and instrumentation fields where these measurements are essential. * Comprehensive and authoritative collection of technical information* Written by a collection of specialist contributors* Updated to include chapters on the fieldbus standards, reliability, EMC, 'virtual instrumentation', fibre optics, smart and intelligent transmitters, analyzers, level and flow meters, and many more
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 2004 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
