Download or read book Window and Dome Technologies written by and published by . This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Window and Dome Technologies and Materials written by and published by . This book was released on 1999 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sapphire written by Elena R. Dobrovinskaya and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the second half of the twentieth century, a new branch of materials science had come into being — crystalline materials research. Its appearance is linked to the emergence of advanced technologies primarily based on single crystals (bulk crystals and films). At the turn of the last century, the impending onset of the “ceramic era” was forecasted. It was believed that ceramics would play a role comparable to that of the Stone or Bronze Ages in the history of civilization. Naturally, such an assumption was hypothetical, but it showed that ceramic materials had evoked keen interest among researchers. Although sapphire traditionally has been considered a gem, it has developed into a material typical of the “ceramic era.” Widening the field of sapphire application necessitated essential improvement of its homogeneity and working characteristics and extension of the range of sapphire products, especially those with stipulated properties including a preset structural defect distribution. In the early 1980s, successful attainment of crystals with predetermined char- teristics was attributed to proper choice of the growth method. At present, in view of the fact that the requirements for crystalline products have become more str- gent, such an approach tends to be insufficient. It is clear that one must take into account the physical–chemical processes that take place during the formation of the real crystal structure, i.e., the growth mechanisms and the nature and causes of crystal imperfections.
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII Volume 34 Issue 8 written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 8 - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII A collection of 20 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8).
Download or read book Transparent Ceramics written by Ling Bing Kong and published by Springer. This book was released on 2015-05-07 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest progress in the field of transparent ceramics, emphasizing their processing as well as solid-state lasers. It consists of 10 chapters covering the synthesis, characterization and compaction, fundamentals of sintering, densification of transparent ceramics by different methods as well as transparent ceramic applications. This book can be used as a reference for senior undergraduate to postgraduate students, researchers, engineers and material scientists working in solid-state physics.
Download or read book Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials III Volume 37 Issue 5 written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2017-01-31 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 9 papers from The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the 10th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8), Additive Manufacturing and 3D Printing Technologies (Focused Session 4), and Field Assisted Sintering (Focused Session 5).
Download or read book Innovative Processing and Manufacturing of Advanced Ceramics and Composites II written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains collection of papers from the below symposia held during the 10th Pacific Rim Conference on Ceramic and Glass Technology (PacRim10), June 2-7, 2013, in Coronado, California 2012: Novel, Green, and Strategic Processing and Manufacturing Technologies Polymer Derived Ceramics and Composites Advanced Powder Processing and Manufacturing Technologies Synthesis and Processing of Materials Using Electric Fields/Currents
Download or read book Global Roadmap for Ceramic and Glass Technology written by Stephen W. Freiman and published by John Wiley & Sons. This book was released on 2007-06-29 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only global roadmap that identifies the technical and manufacturing challenges associated with the development and expansion of commercial markets for ceramics and glass. Featuring presentations by industry leaders at the 1st International Congress on Ceramics (ICC) held in 2006, it suggests positive, proactive ways to address these challenges. The ICC Global Roadmap contains the following content: 1) Summary papers prepared by the invited speakers before the meeting 2) A detailed account of the presentation of each invited speaker written by an editor who attends the presentation 3) A summary account and future recommendations for the industry on each topic covered written by the board and the president of this meeting, Dr. Stephen Freiman (National Institutes of Standards and Technology) 4) The CDRom accompanying the book contains all of the above as well as pdfs of the presentations for non-invited speakers, including posters presented and discussed.
Download or read book Infrared Antireflective and Protective Coatings written by Jiaqi Zhu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-03-05 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction on infrared anti-transparent materials and their applications in anti-reflective and protective coatings. Optical, mechanical and thermal properties and preparations of various kinds of films, such as amorphous diamond films, germanium carbide films, boron phosphide films, alumina films and yttrium oxide film are discussed in detail making it suitable for material scientists and industrial engineers.
Download or read book Active Control Of Aircraft Cabin Noise written by Ignazio Dimino and published by World Scientific. This book was released on 2015-07-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The text is well written and supported by clear and useful illustrations. This would be a useful textbook for postgraduate or advanced undergraduate studies and would also make a good introductory text for engineers moving into the field. The literature survey and bibliography provide a useful starting point for further study.'The Aeronautical JournalActive Control of Aircraft Cabin Noise provides a bridge to fill the gap between robust control theory and practical applications of active noise control systems in aircraft cabin. Both the possibilities and limitations of structural solutions to enhance aircraft cabin comfort by reducing interior noise are discussed supported by a wide range of topics in engineering, from finite element modeling to multichannel adaptive feed-forward control, usually dealt separately in the literature. In addition, experimental noise attenuation results with passengers' subjective perceptions predicting the effects of cabin noise on comfort assessments is examined. Theoretical and experimental research is detailed enough to capture the interest of the non-expert in engineering who wishes to have an overview of some of the active noise control applications in aircraft. This book may be used as an advanced textbook by graduate and undergraduate students in aeronautical engineering, and would be an authoritative resource book for research into the subject.
Download or read book Optical Engineering of Diamond written by Rich Mildren and published by John Wiley & Sons. This book was released on 2013-01-14 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on the engineering of diamond optical devices. Written by 39 experts in the field, it gives readers an up-to-date review of the properties of optical quality synthetic diamond (single crystal and nanodiamond) and the nascent field of diamond optical device engineering. Application areas covered in detail in this book include quantum information processing, high performance lasers and light sources, and bioimaging. It provides scientists, engineers and physicists with a valuable and practical resource for the design and development of diamond-based optical devices.
Download or read book Nanostructured Carbon for Advanced Applications written by Giorgio Benedek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Erice, Sicily, Italy, July 19-31, 2000
Download or read book Handbook of Optical Constants of Solids written by Edward D. Palik and published by Academic Press. This book was released on 1998 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third volume of the very successful set. This updated volume will contain non-linear properties of some of the most useful materials as well as chapters on optical measurement techniques. Contributors have decided the best values for n and k References in each critique allow the reader to go back to the original data to examine and understand where the values have come from Allows the reader to determine if any data in a spectral region needs to be filled in Gives a wide and detailed view of experimental techniques for measuring the optical constants n and k Incorporates and describes crystal structure, space-group symmetry, unit-cell dimensions, number of optic and acoustic modes, frequencies of optic modes, the irreducible representation, band gap, plasma frequency, and static dielectric constant
Download or read book Handbook of Optical Constants of Solids Five Volume Set written by Edward D. Palik and published by Elsevier. This book was released on 1997-12-10 with total page 3437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of five volumes, four volumes edited by Edward D. Palik and a volume by Gorachand Ghosh, is a unique resource for any science and technology library. It provides materials researchers and optical device designers with reference facts in a context not available anywhere else. The singular functionality of the set derives from the unique format for the three core volumes that comprise the Handbook of Optical Constants of Solids. The Handbook satisfies several essential needs: first, it affords the most comprehensive database of the refractive index and extinction (or loss) coefficient of technically important and scientifically interesting dielectrics. This data has been critically selected and evaluated by authorities on each material. Second, the dielectric constant database is supplemented by tutorial chapters covering the basics of dielectric theory and reviews of experimental techniques for each wavelength region and material characteristic. As an additional resource, two of the tutorial chapters summarize the relevant characteristics of each of the materials in the database.The data in the core volumes have been collected and analyzed over a period of twelve years, with the most recent completed in 1997. The volumes systematically define the dielectric properties of 143 of the most engaging materials, including metals, semiconductors, and insulators. Together, the three Palik books contain nearly 3,000 pages, with about 2/3 devoted to the dielectric constant data. The tutorial chapters in the remaining 1/3 of the pages contain a wealth of information, including some dielectric data. Hence, the separate volume, Index to Handbook of Optical Constants of Solids, which is included as part of the set, substantially enhances the utility of the Handbook and in essence, joins all the Palik volumes into one unit. It isthen of great importance to users of the set. A final volume rounds out the set. The Handbook of Thermo-Optic Coefficients of Optical Materials with Applications collects refractive index measurements and their temperature dependence for a large number of crystals and glasses. Mathematical models represent these data, and in turn are used in the design of nonlinear optical devices.* Unique source of extremely useful optical data for a very broad community of scientists, researchers, and practitioners* Will be of great practical applicability to both industry and research* Presents optical constants for a broadest spectral range, for a very large number of materials: Paliks three volumes include 143 materials including 43 elements; Ghoshs volume includes some 70 technologically interesting crystals and many commercial glasses* Includes a special index volume that enables the user to search for the information in the three Palik volumes easily and quickly* Critique chapters in the Palik volumes discuss the data and give reference to most of the literature available for each material* Presents various techniques for measuring the optical constants and mathematical models for analytical calculations of some data
Download or read book Crystal Growth Processes Based on Capillarity written by Thierry Duffar and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal Growth Processes Based on Capillarity closely examines crystal growth technologies, like Czochralski, Floating zone, and Bridgman. The up-to-date reference contains detailed technical and applied information, especially on the difficulty of crystal shape control. Including practical examples and software applications, this book provides both theoretical and experimental sections. Edited by a well-respected academic with over twenty-five years of experience in this field, the text is an excellent resource for professionals in crystal growth as well as for students in understanding the fundamentals and the technology of crystal growth.
Download or read book Materials for Infrared Windows and Domes written by Daniel C. Harris and published by SPIE Press. This book was released on 1999 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a comprehensive introduction to infrared-transparent materials for windows and domes that must withstand harsh environmental conditions, such as high-speed flight or high temperature process monitoring. Introductory material in each section makes the book suitable for anyone with a background in science or engineering.
Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.
