Download or read book Wide Gap Chalcopyrites written by Susanne Siebentritt and published by Springer Science & Business Media. This book was released on 2006-02-25 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chalcopyrites, in particular those with a wide band gap, are fascinating materials in terms of their technological potential in the next generation of thin-film solar cells and in terms of their basic material properties. They exhibit uniquely low defect formation energies, leading to unusual doping and phase behavior and to extremely benign grain boundaries. This book collects articles on a number of those basic material properties of wide-gap chalcopyrites, comparing them to their low-gap cousins. They explore the doping of the materials, the electronic structure and the transport through interfaces and grain boundaries, the formation of the electric field in a solar cell, the mechanisms and suppression of recombination, the role of inhomogeneities, and the technological role of wide-gap chalcopyrites.
Download or read book Solar Cells written by Augustin McEvoy and published by Newnes. This book was released on 2012-12-31 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enormous leaps forward in the efficiency and the economy of solar cells are being made at a furious pace. New materials and manufacturing processes have opened up new realms of possibility for the application of solar cells. Crystalline silicon cells are increasingly making way for thin film cells, which are spawning experimentation with third-generation high-efficiency multijunction cells, carbon-nanotube based cells, UV light for voltage enhancement, and the use of the infrared spectrum for night-time operation, to name only a few recent advances. This thoroughly updated new edition of Markvart and Castaner’s Solar Cells, extracted from their industry standard Practical Handbook of Photovoltaics, is the definitive reference covering the science and operation, materials and manufacture of solar cells. It is essential reading for engineers, installers, designers, and policy-makers who need to understand the science behind the solar cells of today, and tomorrow, in order to take solar energy to the next level. A thorough update to the definitive reference to solar cells, created by a cast of international experts from industry and academia to ensure the highest quality information from multiple perspectives Covers the whole spectrum of solar cell information, from basic scientific background, to the latest advances in materials, to manufacturing issues, to testing and calibration. Case studies, practical examples and reports on the latest advances take the new edition of this amazing resource beyond a simple amalgamation of a vast amount of knowledge, into the realm of real world applications
Download or read book Advances in Solid State Physics written by Bernhard Kramer and published by Springer Science & Business Media. This book was released on 2004-08-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume 44 of Advances in Solid State Physics contains the written versions of most of the invited lectures of the Spring Meeting of the Condensed Matter Physics section of the Deutsche Physikalische Gesellschaft held from March 8 to 12, 2004 in Regensburg, Germany. Many of the topical talks given at the numerous and very lively symposia are also included. They have covered extremely interesting and timely subjects. Thus the book truly reflects the status of the field of solid state physics in 2004, and indicates its importance, not only in Germany but also internationally.
Download or read book Practical Handbook of Photovoltaics written by Augustin McEvoy and published by Academic Press. This book was released on 2012 with total page 1269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook opens with an overview of solar radiation and how its energy can be tapped using photovoltaic cells. Other chapters cover the technology, manufacture and application of PV cells in real situations. The book ends by exploring the economic and business aspects of PV systems.
Download or read book McEvoy s Handbook of Photovoltaics written by Soteris Kalogirou and published by Academic Press. This book was released on 2017-08-24 with total page 1341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Photovoltaics, Third Edition, is a 'benchmark' publication for those involved in the design, manufacture and use of these devices. This fully revised handbook includes brand new sections on smart grids, net metering and the modeling of photovoltaic systems, as well as fully revised content on developments in photovoltaic applications, the economics of PV manufacturing and updated chapters on solar cell function, raw materials, photovoltaic standards, calibration and testing, all with new examples and case studies. The editor has assembled internationally-respected contributors from industry and academia around the world to make this a truly global reference. It is essential reading for electrical engineers, designers of systems, installers, architects, policymakers and physicists working with photovoltaics. Presents a cast of international experts from industry and academia to ensure the highest quality information from multiple stakeholder perspectives Covers all things photovoltaics, from the principles of solar cell function and their raw materials, to the installation and design of full photovoltaic systems Includes case studies, practical examples, and reports on the latest advances and worldwide applications
Download or read book Solar Cells written by Tom Markvart and published by Elsevier. This book was released on 2004-12-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capture and use of solar energy has been growing for many years, but only in recent times have advances in design and manufacture allowed us to see the incorporation of solar energy as a significant player in the renewable energy arena. Solar cells are at the heart of any photovoltaic system and in this book the various types are described and their characteristics reviewed. Going beyond materials, design and function, ‘Solar Cells’ also covers their testing, monitoring and calibration thus providing a comprehensive account of current activity in this important field of research and industry. ‘Solar Cells’ has been abstracted from the recent ‘Practical Handbook of Photovoltaics’ by the same editors (ISBN 185617 3909. 2003: Elsevier) Internationally-respected contributors from industry and academia Abstracted from ‘The Practical Handbook of Photovoltaics' by the same Editors A comprehensive source-book on all aspects of solar cells
Download or read book Practical Handbook of Photovoltaics written by T. Markvart and published by Elsevier. This book was released on 2003-10-30 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook opens with an overview of solar radiation and how its energy can be tapped using photovoltaic cells. Other chapters cover the technology, manufacture and application of PV cells in real situations. The book ends by exploring the economic and business aspects of photovoltaics.
Download or read book Clean Electricity From Photovoltaics written by Mary D Archer and published by World Scientific. This book was released on 2001-06-04 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic cells provide clean, reversible electrical power from the sun. Made from semiconductors, they are durable, silent in operation and free of polluting emissions. In this book, experts from all sectors of the PV community — materials scientists, physicists, production engineers, economists and environmentalists — give their critical appraisals of where the technology is now and what its prospects are./a
Download or read book Gallium Nitride and Related Wide Bandgap Materials and Devices written by R. Szweda and published by Elsevier. This book was released on 2000-07-07 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Gallium Nitride & Related Wide Bandgap Materials and Devices provides a detailed insight into the global developments in GaN, SiC and other optoelectronic materials. This report also examines the implication for both suppliers and users of GaN technology. For a PDF version of the report please call Tina Enright on +44 (0) 1865 843008 for price details.
Download or read book Advanced Concepts in Photovoltaics written by Arthur J. Nozik and published by Royal Society of Chemistry. This book was released on 2014-07-10 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic systems enable the sun’s energy to be converted directly into electricity using semiconductor solar cells. The ultimate goal of photovoltaic research and development is to reduce the cost of solar power to reach or even become lower than the cost of electricity generated from fossil and nuclear fuels. The power conversion efficiency and the cost per unit area of the phototvoltaic system are critical factors that determine the cost of photovoltaic electricity. Until recently, the power conversion efficiency of single-junction photovoltaic cells has been limited to approximately 33% - the so-called Shockley-Queisser limit. This book presents the latest developments in photovoltaics which seek to either reach or surpass the Shockley-Queisser limit, and to lower the cell cost per unit area. Progress toward this ultimate goal is presented for the three generations of photovoltaic cells: the 1st generation based on crystalline silicon semiconductors; the 2nd generation based on thin film silicon, compound semiconductors, amorphous silicon, and various mesoscopic structures; and the 3rd generation based on the unique properties of nanoscale materials, new inorganic and organic photoconversion materials, highly efficient multi-junction cells with low cost solar concentration, and novel photovoltaic processes. The extent to which photovoltaic materials and processes can meet the expectations of efficient and cost effective solar energy conversion to electricity is discussed. Written by an international team of expert contributors, and with researchers in academia, national research laboratories, and industry in mind, this book is a comprehensive guide to recent progress in photovoltaics and essential for any library or laboratory in the field.
Download or read book Clean Electricity From Photovoltaics 2nd Edition written by Mary D Archer and published by World Scientific. This book was released on 2014-10-17 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Clean Electricity from Photovoltaics, first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production.
Download or read book Chalcogenide Photovoltaics written by Roland Scheer and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive description of the most important material properties and device aspects closes the gap between general books on solar cells and journal articles on chalcogenide-based photovoltaics. Written by two very renowned authors with years of practical experience in the field, the book covers II-VI and I-III-VI2 materials as well as energy conversion at heterojunctions. It also discusses the latest semiconductor heterojunction models and presents modern analysis concepts. Thin film technology is explained with an emphasis on current and future techniques for mass production, and the book closes with a compendium of failure analysis in photovoltaic thin film modules. With its overview of the semiconductor physics and technology needed, this practical book is ideal for students, researchers, and manufacturers, as well as for the growing number of engineers and researchers working in companies and institutes on chalcogenide photovoltaics.
Download or read book Photovoltaic Energy Conversion written by Kosuke Kurokawa and published by . This book was released on 2003 with total page 2930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.
Download or read book The Physics of Semiconductors written by Marius Grundmann and published by Springer. This book was released on 2015-12-24 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook contains ample material for a comprehensive upper-level undergraduate or beginning graduate course, guiding readers to the point where they can choose a special topic and begin supervised research. The textbook provides a balance between essential aspects of solid-state and semiconductor physics, on the one hand, and the principles of various semiconductor devices and their applications in electronic and photonic devices, on the other. It highlights many practical aspects of semiconductors such as alloys, strain, heterostructures, nanostructures, that are necessary in modern semiconductor research but typically omitted in textbooks. Coverage also includes additional advanced topics, such as Bragg mirrors, resonators, polarized and magnetic semiconductors, nanowires, quantum dots, multi-junction solar cells, thin film transistors, carbon-based nanostructures and transparent conductive oxides. The text derives explicit formulas for many results to support better understanding of the topics. The Physics of Semiconductors requires little or no prior knowledge of solid-state physics and evolved from a highly regarded two-semester course. In the third edition several topics are extended and treated in more depth including surfaces, disordered materials, amorphous semiconductors, polarons, thermopower and noise. More than 1800 references guide the reader to historic and current literature including original and review papers and books.
Download or read book Photovoltaic Solar Energy written by Angèle Reinders and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar PV is now the third most important renewable energy source, after hydro and wind power, in terms of global installed capacity. Bringing together the expertise of international PV specialists Photovoltaic Solar Energy: From Fundamentals to Applications provides a comprehensive and up-to-date account of existing PV technologies in conjunction with an assessment of technological developments. Key features: Written by leading specialists active in concurrent developments in material sciences, solar cell research and application-driven R&D. Provides a basic knowledge base in light, photons and solar irradiance and basic functional principles of PV. Covers characterization techniques, economics and applications of PV such as silicon, thin-film and hybrid solar cells. Presents a compendium of PV technologies including: crystalline silicon technologies; chalcogenide thin film solar cells; thin-film silicon based PV technologies; organic PV and III-Vs; PV concentrator technologies; space technologies and economics, life-cycle and user aspects of PV technologies. Each chapter presents basic principles and formulas as well as major technological developments in a contemporary context with a look at future developments in this rapidly changing field of science and engineering. Ideal for industrial engineers and scientists beginning careers in PV as well as graduate students undertaking PV research and high-level undergraduate students.
Download or read book Flexible Electronics for Electric Vehicles written by Sanjeet Dwivedi and published by Springer Nature. This book was released on 2022-10-04 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the refereed papers presented during the 2nd Flexible Electronics for Electric Vehicles (FlexEV - 2021). It presents the diligent work of the research community on flexible electronics applications in different allied fields of engineering - engineering materials to electrical engineering to electronics and communication engineering. The theoretical research concepts are supported with extensive reviews highlighting the trends in the possible and real-life applications of electric vehicles. This book will be useful for research scholars, electric vehicles professionals, driving system designers, and postgraduates from allied domains. This book incorporates economical and efficient electric vehicle driving and the latest innovations in electric vehicle technology with their paradigms and methods that employ knowledge in the research community.