Download or read book Ergonomics written by Pamela McCauley-Bush and published by CRC Press. This book was released on 2011-12-13 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to the field, Ergonomics: Foundational Principles, Applications and Technologies discusses scientific principles, research, applications, and emerging trends in technology. Covering the foundational principles and major topics in physical ergonomics, the book contains the necessary components of a quality ergonomics course,

Download or read book Production Ergonomics written by Cecilia Berlin and published by Ubiquity Press. This book was released on 2017-06-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production ergonomics – the science and practice of designing industrial workplaces to optimize human well-being and system performance – is a complex challenge for a designer. Humans are a valuable and flexible resource in any system of creation, and as long as they stay healthy, alert and motivated, they perform well and also become more competent over time, which increases their value as a resource. However, if a system designer is not mindful or aware of the many threats to health and system performance that may emerge, the end result may include inefficiency, productivity losses, low working morale, injuries and sick-leave. To help budding system designers and production engineers tackle these design challenges holistically, this book offers a multi-faceted orientation in the prerequisites for healthy and effective human work. We will cover physical, cognitive and organizational aspects of ergonomics, and provide both the individual human perspective and that of groups and populations, ending up with a look at global challenges that require workplaces to become more socially and economically sustainable. This book is written to give you a warm welcome to the subject, and to provide a solid foundation for improving industrial workplaces to attract and retain healthy and productive staff in the long run.

Download or read book Constructive Ergonomics written by Pierre Falzon and published by CRC Press. This book was released on 2014-09-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal for ergonomics has always been to adapt work, work environments, and machines to humans. But is this goal still sufficient? Does it satisfy the needs of the individual or of societies and organizations as they operate now? Constructive Ergonomics provides an answer to these questions. Rooted both in the academic world and in the world of p

Download or read book Introduction to Ergonomics Second Edition written by Robert Bridger and published by CRC Press. This book was released on 2008-06-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: When faced with productivity problems in the workplace, engineers might call for better machines, and management might call for better-trained people, but ergonomists call for a better interface and better interaction between the user and the machine. Introduction to Ergonomics, 2nd Edition, provides a comprehensive introduction to ergonomics as the study of the relationship between people and their working environment. The author presents evidence from field trials, studies and experiments that demonstrate the value of ergonomics in making the workplace safer, more error resistant, and compatible with users' characteristics and psychological and social needs. Evidence for the effectiveness of each topic is incorporated throughout the book as well, which helps practitioners to make the case for company investment in ergonomics. In addition, the author outlines international standards for ergonomics that influence engineering and design and pave the way for a more precise form of practice. Extensively revised and updated, this second edition explains the main areas of application, the science that underpins these applications, and demonstrates the cost-effectiveness of implementing the applications in a wide variety of work settings.

Download or read book Introduction to Nursing Informatics written by Kathryn J. Hannah and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series is intended for the rapidly increasing number of health care professionals who have rudimentary knowledge and experience in health care computing and are seeking opportunities to expand their horizons. It does not attempt to compete with the primers already on the market. Eminent international experts will edit, author, or contribute to each volume in order to provide comprehensive and current accounts of in novations and future trends in this quickly evolving field. Each book will be practical, easy to use, and weIl referenced. Our aim is for the series to encompass all of the health professions by focusing on specific professions, such as nursing, in individual volumes. However, integrated computing systems are only one tool for improving communication among members of the health care team. Therefore, it is our hope that the series will stimulate professionals to explore additional me ans of fostering interdisciplinary exchange. This se ries springs from a professional collaboration that has grown over the years into a highly valued personal friendship. Our joint values put people first. If the Computers in Health Care series lets us share those values by helping health care professionals to communicate their ideas for the benefit of patients, then our efforts will have succeeded.

Download or read book Ergonomics and Design written by Scott Openshaw and published by . This book was released on 2007-08-01 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interaction between the user & the product is one of the primary concerns of the product design process. While there are many different methods of ergonomic research & theory used to develop products that solve common workplace problems, this reference helps to clarify some of the concepts & methodologies that Allsteel Inc. used in its process. The goal is to provide a better understanding of how the science of Ergonomics is used to make products that help employees work more comfortably, efficiently, & effectively. Contents: Product Design Ergonomics 101; Anthropometric Measurements; Common Workplace Postures; Common Workplace Motions; Office Furniture Guidelines for Fit & Function; & Universal Design Considerations.

Download or read book Design for Ergonomics written by Francesca Tosi and published by Springer Nature. This book was released on 2019-11-21 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the global quality of the design of systems that people interact with during their work activities and daily lives; a quality that involves the globality of people’s experience – physical, sensory, cognitive and emotional. It presents a concise and structured overview of the ergonomic approach to planning, and of methodological and operational tools from ergonomic research that can more directly and concretely contribute to the design process. The book also explores physical ergonomics and cognitive ergonomics, which are essential components of design culture. The final section addresses the main design problems and intervention criteria regarding the design of environments, products and equipment, as well as the design of communication, training and learning interface systems based on digital technologies. The book is chiefly intended for designers and anyone interested in the methods, tools and opportunities for in-depth analysis and development that ergonomics can offer regarding the conception, production and testing of products, environments and services, whether physical or virtual. It also offers a learning resource for professionals and students in Industrial Design and Planning.

Download or read book Ergonomics written by K. Murrell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until quite recently conditions in industry were often rough. Long hours were worked in insanitary and murky workshops, often with little regard to the effects upon the workpeople who were considered to be expendable. Now, however, these adverse conditions have been recognized and so remedied that there remains little in industrial conditions to disturb the public conscience. This does not mean that conditions of work in office or factory are perfect. The obvious and dramatic abuses of the human frame may have gone, but in their place have arisen stresses and strains which, taking effect only in the long term, are generally undramatic and often unrecognized. They exist none the less. No organized effort to study the effect of working conditions on man's performance was made until the end of World War I, when the Industrial Fatigue Research Board was set up. For the first time, men trained in the human sciences entered industry to study men at work. They made con tributions which set a new standard of scientific investigation into human performance and allowed executive action on the basis of evidence rather than of hunch. The Board's work differed from the contribution of Gilbreth in America in that the principles of Motion Study which he developed were, to a large extent, based on intelligent observation rather than controlled experiment. During the 1920S the National Institute of Industrial Psychology was founded and there was close collaboration between it and the I.F.R.B.

Download or read book Occupational Ergonomics written by Theresa Stack and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach to the book is analogous to a toolkit. The user will open the book and locate the tool that best fits the ergonomic assessment task he/she is performing. The chapters of the book progress from the concept of ergonomics, through the various assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. The supporting material at the end of each chapter contains exercises, case studies and review questions. The case study section of the book presents how to use techniques to analyze a range of workplace scenarios. Topics include: The Basics of Ergonomics; Anthropometry; Office Ergonomics; Administrative Controls; Biomechanics; Hand Tools; Vibration; Workstation Design; Manual Material Handling; Job Requirements and Physical Demands Survey; Ergonomic Survey Tools; Work-related Musculoskeletal Disorders; How to Conduct an Ergonomics Assessment; and Case Studies

Download or read book Routledge Handbook of Ergonomics in Sport and Exercise written by Youlian Hong and published by Routledge. This book was released on 2013-12-04 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics is concerned with the ‘fit’ between people and their work. With an increasing number of people becoming conscious about their health and participating in sport or physical activity, ergonomics has become an increasingly prominent concern within the sport and exercise sciences. From the design of footwear and artificial playing surfaces, to studies of proprioception by obese children , the way in which people interact with their environment - designed and natural – has important implications for performance sport and for the design of safe and beneficial forms of physical activity. The Routledge Handbook of Ergonomics in Sport and Exercise is the first book to offer a comprehensive and in-depth survey of cutting-edge scientific research into ergonomics in sport and exercise. Written by world-leading international scientists and researchers, the book explores key topics such as: Musculoskeletal adaptation to sports and exercise Environmental factors of injury and fatigue Load weight and performance Ergonomics in adapted sports and exercise Measurement in sports and exercise Modeling and simulation in ergonomics design Influence of playing surface, footwear and equipment design Bridging the gap between fundamental scientific research in sport and exercise and applications in sport and exercise contexts, this is an important reference for all advanced students, researchers and professionals working in sport and exercise science, kinesiology, sports technology, sports engineering, ergonomics, and product design.

Download or read book Occupational Ergonomics written by Amit Bhattacharya and published by CRC Press. This book was released on 2012-03-08 with total page 1311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fifteen years since the publication of Occupational Ergonomics: Theory and Applications significant advances have been made in this field. These advances include understanding the impact of ageing and obesity on workplace, the role of ergonomics in promoting healthy workplaces and healthy life styles, the role of ergonomic science in th

Download or read book Automotive Ergonomics written by Heiner Bubb and published by Springer Nature. This book was released on 2021-10-19 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics teaches how to design technology in such a way that it is optimally adapted to the needs, wishes and characteristics of the user. In this context, the concept of the human-machine system has become established. In a systematic way and with a detailed view of the complicated technical and perceptual psychological and methodological connections, this book explains the basics of automotive ergonomics with numerous examples. The application is shown in examples such as package, design of displays and control elements, of environmental ergonomics such as lighting, sound, vibrations, climate and smell. The design of driver assistance systems from an ergonomic perspective is also a central topic. The book is rounded off by methods of ergonomic vehicle development, the use of mock-ups, driving simulators and tests in real vehicles and prototypes. For the first time, those responsible in the automotive industry and in the field of relevant research are provided with a specialized systematic work that provides the ergonomic findings in the design of today's automobiles. This provides planners and designers of today's automobiles with concrete information for ergonomic product development, enabling them to keep an eye on decisive requirements and subsequent customer acceptance. This book is a translation of the original German 1st edition Automobilergonomie by Heiner Bubb, Klaus Bengler, Rainer E. Grünen & Mark Vollrath, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2015. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.

Download or read book Handbook of Human Factors and Ergonomics written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 2012-05-24 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of the Handbook of Human Factors and Ergonomics has been completely revised and updated. This includes all existing third edition chapters plus new chapters written to cover new areas. These include the following subjects: Managing low-back disorder risk in the workplace Online interactivity Neuroergonomics Office ergonomics Social networking HF&E in motor vehicle transportation User requirements Human factors and ergonomics in aviation Human factors in ambient intelligent environments As with the earlier editions, the main purpose of this handbook is to serve the needs of the human factors and ergonomics researchers, practitioners, and graduate students. Each chapter has a strong theory and scientific base, but is heavily focused on real world applications. As such, a significant number of case studies, examples, figures, and tables are included to aid in the understanding and application of the material covered.

Download or read book Introduction to Human Factors and Ergonomics for Engineers written by Mark R. Lehto and published by CRC Press. This book was released on 2007-08-30 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing customer oriented design and operation, Introduction to Human Factors and Ergonomics for Engineers explores the behavioral, physical, and mathematical foundations of the discipline and how to apply them to improve the human, societal, and economic well being of systems and organizations. The book discusses product design, such as tools,

Download or read book Ergonomics in Developing Regions written by Patricia A. Scott and published by CRC Press. This book was released on 2009-06-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrially developing countries have the largest populations, the highest levels of poverty, poor health, and illiteracy, and the greatest need for improvement in working conditions. And as the marketplace and the workforce goes increasingly global, accountability with regard to the abuse of cheap labor in developing countries is becoming an issu

Download or read book Human Factors and Ergonomics in Practice written by Steven Shorrock and published by CRC Press. This book was released on 2016-11-18 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book concerns the real practice of human factors and ergonomics (HF/E), conveying the perspectives and experiences of practitioners and other stakeholders in a variety of industrial sectors, organisational settings and working contexts. The book blends literature on the nature of practice with diverse and eclectic reflections from experience in a range of contexts, from healthcare to agriculture. It explores what helps and what hinders the achievement of the core goals of HF/E: improved system performance and human wellbeing.?The book should be of interest to current HF/E practitioners, future HF/E practitioners, allied practitioners, HF/E advocates and ambassadors, researchers, policy makers and regulators, and clients of HF/E services and products.

Download or read book Cultural Ergonomics written by Tonya L. Smith-Jackson and published by CRC Press. This book was released on 2013-12-10 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even when products and systems are highly localized, rarely is there one design suitable for a single, mono-cultural population of users. The products and systems created and used are cultural artifacts representing shared cognitions that characterize mental models that result from interactions with physical environments. Thus, culture is embedded and impacts the extent to which products are usable, accessible, useful, and safe. Products and systems that deviate from users’ mental models may have negative consequences for users, ranging from minor annoyance to more serious consequences such as severe injury or death. Both an introduction and a primer, Cultural Ergonomics: Theory, Methods, and Applications demonstrates how cultural ergonomics can be applied in research and practitioner contexts. It covers selection of theories, descriptions of research designs, methods to analyze the results, case studies, and strategies used to draw inferences and conclusions in a vast array of areas including occupational safety, global issues, emergency management, human-computer interaction, warnings and risk communications, and product design. Human factors/ergonomics, as a discipline, is slowly integrating cultural ergonomics into efforts to explore human capabilities and limitations in the context of design and evaluation. Edited by experts and containing contributions from pioneers in this area, this book provides examples and methodologies within a human factors framework. It provides systematic methods to apply what is learned from analysis of culture to the design, development, and evaluation of products and systems.