Download or read book Weed Control Economics and Environmental Impacts of Glyphosate tolerant Sugarbeet written by Andrew R. Kniss and published by . This book was released on 2003 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparison of the Eco efficiency of Conventional and Glyphosate resistant Sugarbeet Herbicide Treatments written by Carl W. Coburn and published by . This book was released on 2013 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of glyphosate-resistant sugarbeet has greatly altered sugarbeet production practices. Compared to conventional sugarbeet herbicides, glyphosate allows for flexible and effective weed control without the need for additional tillage and hand labor. Eco-efficiency analysis is a method to compare production methods by quantifying the output produced per unit of environmental impact of the inputs used. Eco-efficiency analysis was used to compare the sustainability of conventional and glyphosate-resistant sugarbeet production. Risk quotients were calculated based on herbicide exposure and toxicity to various environmental compartments to provide an estimate of environmental impact. Yield was divided by treatment risk quotient to determine treatment eco-efficiency. Risk from the use of all herbicides was below EPA established limits. Eco-efficiency for glyphosate treatments was equal to, or greater than, all conventional treatments for all indicators with the exception of micro rate treatments for the mammalian indicator. Overall, the transfer from conventional sugarbeet herbicides to glyphosate in glyphosate-resistant sugarbeet results in a net benefit for herbicide environmental impact and sugar yield.
Download or read book Biodiversity in Glyphosate Tolerant Fodder Beet Fields written by Beate Strandberg and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Integrated Weed Management for Sustainable Agriculture written by Robert Zimdahl and published by Burleigh Dodds Series in Agric. This book was released on 2017-12-14 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weeds remain a major obstacle to improved yields in agriculture. At the same time, established methods of control are being undermined by problems such as herbicide resistance. This major collection reviews key developments in integrated weed management (IWM) to manage weeds more sustainably.
Download or read book Environmental Impact of Genetically Modified Crops written by Natalie Ferry and published by CABI. This book was released on 2009-01-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The genetic modification of crops continues to be the subject of intense debate, and opinions are often strongly polarised. Environmental Impact of Genetically Modified Crops addresses the major concerns of scientists, policy makers, environmental lobby groups and the general public regarding this controversial issue, from an editorially neutral standpoint. While the main focus is on environmental impact, food safety issues, for both humans and animals are also considered. The book concludes with a discussion on the future of agricultural biotechnology in the context of sustainability, natural resource management and future global population and food supply.
Download or read book Herbicide Resistant Crops written by Stephen O. Duke and published by CRC Press. This book was released on 2018-01-18 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by a recognized leader in the field, Herbicide-Resistant Crops is the first book to cover all of the issues related to the controversial topic of herbicide-resistant crops. It provides extensive discussions of the modern biotechnological methods that have been used to develop such crops, and reviews the implications - both positive and negative - of developing crops that are resistant to herbicides. The creation and anticipated applications of specific herbicide-resistant crops are also discussed. In addition, the book covers the potential impact of herbicide-resistant crops on weed management practices and the environment, and presents issues related to the regulation and economics of these crops. The editor has brought together a diverse group of professionals, representing the several distinct areas impacted by the new technology of herbicide-resistant crops. The wide range of viewpoints presented in this book creates a balanced and complete survey, providing a notable contribution to the literature.
Download or read book Transgenic Crops IV written by Eng Chong Pua and published by Springer Science & Business Media. This book was released on 2007-05-22 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the current knowledge of plant biotechnology as an important tool for crop improvement. It covers cereals, vegetables, root crops, herbs and spices. This volume is an invaluable reference for plant breeders, researchers and graduate students in the fields of plant biotechnology, agronomy, horticulture, genetics and both plant cell and molecular biology.
Download or read book The Economic and Environmental Impacts of Agbiotech written by Nicholas Kalaitzandonakes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: After almost fifteen years in the laboratory and in the test plots, bioengineered crops arrived to the market in the mid-1990s. Adoption was rapid and wide spread. In 1996, less than 4 million acres in six countries were planted with bioengineered crops. By 2001, worldwide adoption had expanded to more than 115 million acres. Important questions quickly followed. What were the factors driving the widespread adoption and rapid diffusion of these first-generation agrobiotech nologies? What were their economic and environmental impacts? How were such impacts distributed among large and small producers, innovators and adopters, developed and developing countries, exporters and importers, domestic and foreign consumers? How were such impacts and their distribu tion affected by market structure and government policies? A growing body of literature has provided valuable answers to some of these questions. However, an assessment that accounts for the full range of differences in geography, weather, pests, farm structures, and institutions had not been completed. It brings together leading This book provides just such an assessment. authors from around the world who have analyzed the production, environ mental, and economic impacts of first-generation crop biotechnologies. By pooling experiences across various countries, time periods, crops, and traits, this global panel is able to synthesize a complete picture of the impacts of first-generation crop biotechnologies.
Download or read book Glyphosate Resistance in Crops and Weeds written by Vijay K. Nandula and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are becoming available for managing glyphosate resistant (GR) weeds and reducing their spread. GR crop technology has revolutionized crop production in the developed world and the benefits are gradually spilling over to the developing world. In order to sustain an effective, environmentally safe herbicide such as glyphosate and the GR crop technology well in to the future, it is imperative that the issue of GR weeds be comprehensively understood. This book provides such an essential, up-to-date source of information on glyphosate resistance for researchers, extension workers, land managers, government personnel, and other decision makers. Provides comprehensive coverage of the intensely studied topic of glyphosate resistant (GR) in crops Details the development of glyphosate resistance and how to detect and manage the problem in crops Helps standardize global approaches to glyphosate resistance Encompasses interdisciplinary approaches in chemistry, weed science, biochemistry, plant physiology, plant biotechnology, genetics, ecology Includes a chapter on economic analysis of GR impact on crops
Download or read book Herbicide Resistance in Plants written by Homer M. LeBaron and published by John Wiley & Sons. This book was released on 1982 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Biology of Weed Control written by Jonathan Gressel and published by CRC Press. This book was released on 2002-03-28 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Biology of Weed Control assesses the impact of the new tools of molecular biology on the science of weed control as well as the ways in which the science of weed control has helped and influenced molecular biology. Accentuating the utility of molecular biology to contribute to the control of intransigent weed species both in the developing and developed world, the book also looks to the future and describes how molecular biology can be used to diminish the use of chemical herbicides, and enhance crop competitiveness for light, nutrients and water. This volume is essential reading for all weed scientists, environmental students, researchers, and regulators.
Download or read book The Future Role of Pesticides in US Agriculture written by National Research Council and published by National Academies Press. This book was released on 2000-11-02 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although chemical pesticides safeguard crops and improve farm productivity, they are increasingly feared for their potentially dangerous residues and their effects on ecosystems. The Future Role of Pesticides explores the role of chemical pesticides in the decade ahead and identifies the most promising opportunities for increasing the benefits and reducing the risks of pesticide use. The committee recommends R&D, program, and policy initiatives for federal agriculture authorities and other stakeholders in the public and private sectors. This book presents clear overviews of key factors in chemical pesticide use, including: Advances in genetic engineering not only of pest-resistant crops but also of pests themselves. Problems in pesticide useâ€"concerns about the health of agricultural workers, the ability of pests to develop resistance, issues of public perception, and more. Impending shifts in agricultureâ€"globalization of the economy, biological "invasions" of organisms, rising sensitivity toward cross-border environmental issues, and other trends. With a model and working examples, this book offers guidance on how to assess various pest control strategies available to today's agriculturist.
Download or read book Cotton Production written by Khawar Jabran and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview of the role of cotton in the economy and cotton production around the world This book offers a complete look at the world’s largest fiber crop: cotton. It examines its effect on the global economy—its uses and products, harvesting and processing, as well as the major challenges and their solutions, recent trends, and modern technologies involved in worldwide production of cotton. Cotton Production presents recent developments achieved by major cotton producing regions around the world, including China, India, USA, Pakistan, Turkey and Europe, South America, Central Asia, and Australia. In addition to origin and history, it discusses the recent advances in management practices, as well as the agronomic challenges and the solutions in the major cotton producing areas of the world. Keeping a focus on global context, the book provides sufficient details regarding the management of cotton crops. These details are not limited to the choice of cultivar, soil management, fertilizer and water management, pest control, cotton harvesting, and processing. The first book to cover all aspects of cotton production in a global context Details the role of cotton in the economy, the uses and products of cotton, and its harvesting and processing Discusses the current state of cotton management practices and issues within and around the world’s cotton producing areas Provides insight into the ways to improve cotton productivity in order to keep pace with the growing needs of an increasing population Cotton Production is an essential book for students taking courses in agronomy and cropping systems as well as a reference for agricultural advisors, extension specialists, and professionals throughout the industry.
Download or read book Weed and Crop Resistance to Herbicides written by Rafael de Prado and published by Springer Science & Business Media. This book was released on 1997-05-31 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, repeated use of herbicides in the same field has imposed selection for resistance in species that were formerly susceptible. On the other hand, considerable research in the private and public sectors has been directed towards introducing herbicide tolerance into susceptible crop species. The evolution of herbicide resistance, understanding its mechanisms, characterisation of resistant weed biotypes, development of herbicide-tolerant crops and management of resistant weeds are described throughout the 36 chapters of this book. It has been written by leading researchers based on the contributions made at the International Symposium on Weed and Crop Resistance to Herbicides held at Córdoba, Spain. This book will be a good reference source for research scientists and advanced students.
Download or read book Proceedings of the Western Society of Weed Science written by Western Society of Weed Science (U.S.) and published by . This book was released on 2004 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Chemical Weed Control written by Khawar Jabran and published by Academic Press. This book was released on 2018-01-03 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Chemical Weed Control is the first book to present an overview of plant crop protection against non-food plants using non-chemical means. Plants growing wild—particularly unwanted plants found in cultivated ground to the exclusion of the desired crop—have been treated with herbicides and chemical treatments in the past. As concern over environmental, food and consumer safety increases, research has turned to alternatives, including the use of cover crops, thermal treatments and biotechnology to reduce and eliminate unwanted plants. This book provides insight into existing and emerging alternative crop protection methods and includes lessons learned from past methodologies. As crop production resources decline while consumer concerns over safety increase, the effective control of weeds is imperative to insure the maximum possible levels of soil, sunlight and nutrients reach the crop plants. - Allows reader to identify the most appropriate solution based on their individual use or case - Provides researchers, students and growers with current concepts regarding the use of modern, environment-friendly weed control techniques - Presents methods of weed management—an important part of integrated weed management in the future - Exploits the knowledge gained from past sustainable weed management efforts