Download or read book Rate Independent Systems written by Alexander Mielke and published by Springer. This book was released on 2015-10-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides both an introduction to and a thorough exposition of the theory of rate-independent systems, which the authors have been working on with a lot of collaborators over 15 years. The focus is mostly on fully rate-independent systems, first on an abstract level either with or even without a linear structure, discussing various concepts of solutions with full mathematical rigor. Then, usefulness of the abstract concepts is demonstrated on the level of various applications primarily in continuum mechanics of solids, including suitable approximation strategies with guaranteed numerical stability and convergence. Particular applications concern inelastic processes such as plasticity, damage, phase transformations, or adhesive-type contacts both at small strains and at finite strains. A few other physical systems, e.g. magnetic or ferroelectric materials, and couplings to rate-dependent thermodynamic models are considered as well. Selected applications are accompanied by numerical simulations illustrating both the models and the efficiency of computational algorithms. In this book, the mathematical framework for a rigorous mathematical treatment of "rate-independent systems" is presented in a comprehensive form for the first time. Researchers and graduate students in applied mathematics, engineering, and computational physics will find this timely and well written book useful.

Download or read book Handbook of Differential Equations Evolutionary Equations written by C.M. Dafermos and published by Gulf Professional Publishing. This book was released on 2005-11-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains several introductory texts concerning the main directions in the theory of evolutionary partial differential equations. The main objective is to present clear, rigorous, and in depth surveys on the most important aspects of the present theory.

Download or read book Solvability Regularity and Optimal Control of Boundary Value Problems for PDEs written by Pierluigi Colli and published by Springer. This book was released on 2017-11-03 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers contributions in the field of partial differential equations, with a focus on mathematical models in phase transitions, complex fluids and thermomechanics. These contributions are dedicated to Professor Gianni Gilardi on the occasion of his 70th birthday. It particularly develops the following thematic areas: nonlinear dynamic and stationary equations; well-posedness of initial and boundary value problems for systems of PDEs; regularity properties for the solutions; optimal control problems and optimality conditions; feedback stabilization and stability results. Most of the articles are presented in a self-contained manner, and describe new achievements and/or the state of the art in their line of research, providing interested readers with an overview of recent advances and future research directions in PDEs.

Download or read book Phase Separation Coupled with Damage Processes written by Christian Heinemann and published by Springer Science & Business Media. This book was released on 2014-03-24 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors explore a unifying model which couples phase separation and damage processes in a system of partial differential equations. The model has technological applications to solder materials where interactions of both phenomena have been observed and cannot be neglected for a realistic description. The equations are derived in a thermodynamically consistent framework and suitable weak formulations for various types of this coupled system are presented. In the main part, existence of weak solutions is proven and degenerate limits are investigated.

Download or read book Nonlinear PDE s and Applications written by Stefano Bianchini and published by Springer. This book was released on 2011-07-30 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the notes of the CIME course "Nonlinear PDE’s and applications" held in Cetraro (Italy) on June 23–28, 2008. It consists of four series of lectures, delivered by Stefano Bianchini (SISSA, Trieste), Eric A. Carlen (Rutgers University), Alexander Mielke (WIAS, Berlin), and Cédric Villani (Ecole Normale Superieure de Lyon). They presented a broad overview of far-reaching findings and exciting new developments concerning, in particular, optimal transport theory, nonlinear evolution equations, functional inequalities, and differential geometry. A sampling of the main topics considered here includes optimal transport, Hamilton-Jacobi equations, Riemannian geometry, and their links with sharp geometric/functional inequalities, variational methods for studying nonlinear evolution equations and their scaling properties, and the metric/energetic theory of gradient flows and of rate-independent evolution problems. The book explores the fundamental connections between all of these topics and points to new research directions in contributions by leading experts in these fields.

Download or read book Trends in Applications of Mathematics to Mechanics written by Elisabetta Rocca and published by Springer. This book was released on 2018-04-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from the INDAM Symposium on Trends on Applications of Mathematics to Mechanics (STAMM), which was held at the INDAM headquarters in Rome on 5–9 September 2016. It brings together original contributions at the interface of Mathematics and Mechanics. The focus is on mathematical models of phenomena issued from various applications. These include thermomechanics of solids and gases, nematic shells, thin films, dry friction, delamination, damage, and phase-field dynamics. The papers in the volume present novel results and identify possible future developments. The book is addressed to researchers involved in Mathematics and its applications to Mechanics.

Download or read book Mathematical Analysis of Continuum Mechanics and Industrial Applications II written by Patrick van Meurs and published by Springer. This book was released on 2017-11-16 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the sequel to the proceedings of the International Conference of Continuum Mechanics Focusing on Singularities (CoMFoS15), the proceedings of CoMFoS16 present further advances and new topics in mathematical theory and numerical simulations related to various aspects of continuum mechanics. These include fracture mechanics, shape optimization, modeling of earthquakes, material structure, interface dynamics and complex systems.. The authors are leading researchers with a profound knowledge of mathematical analysis from the fields of applied mathematics, physics, seismology, engineering, and industry. The book helps readers to understand how mathematical theory can be applied to various industrial problems, and conversely, how industrial problems lead to new mathematical challenges.

Download or read book Mathematical Methods in Continuum Mechanics of Solids written by Martin Kružík and published by Springer. This book was released on 2019-03-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on rigorous mathematical formulation and treatment of static problems arising in continuum mechanics of solids at large or small strains, as well as their various evolutionary variants, including thermodynamics. As such, the theory of boundary- or initial-boundary-value problems for linear or quasilinear elliptic, parabolic or hyperbolic partial differential equations is the main underlying mathematical tool, along with the calculus of variations. Modern concepts of these disciplines as weak solutions, polyconvexity, quasiconvexity, nonsimple materials, materials with various rheologies or with internal variables are exploited. This book is accompanied by exercises with solutions, and appendices briefly presenting the basic mathematical concepts and results needed. It serves as an advanced resource and introductory scientific monograph for undergraduate or PhD students in programs such as mathematical modeling, applied mathematics, computational continuum physics and engineering, as well as for professionals working in these fields.

Download or read book Non standard Discretisation Methods in Solid Mechanics written by Jörg Schröder and published by Springer Nature. This book was released on 2022-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume summarizes research being pursued within the DFG Priority Programme 1748: "Reliable Simulation Methods in Solid Mechanics. Development of non-standard discretisation methods, mechanical and mathematical analysis", the aim of which was to develop novel discretisation methods based e.g. on mixed finite element methods, isogeometric approaches as well as discontinuous Galerkin formulations, including a sound mathematical analysis for geometrically as well as physically nonlinear problems. The Priority Programme has established an international framework for mechanical and applied mathematical research to pursue open challenges on an inter-disciplinary level. The compiled results can be understood as state of the art in the research field and show promising ways of further research in the respective areas. The book is intended for doctoral and post-doctoral students in civil engineering, mechanical engineering, applied mathematics and physics, as well as industrial researchers interested in the field.

Download or read book Topics in Applied Analysis and Optimisation written by Michael Hintermüller and published by Springer Nature. This book was released on 2019-11-27 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises selected, revised papers from the Joint CIM-WIAS Workshop, TAAO 2017, held in Lisbon, Portugal, in December 2017. The workshop brought together experts from research groups at the Weierstrass Institute in Berlin and mathematics centres in Portugal to present and discuss current scientific topics and to promote existing and future collaborations. The papers include the following topics: PDEs with applications to material sciences, thermodynamics and laser dynamics, scientific computing, nonlinear optimization and stochastic analysis.

Download or read book IUTAM Symposium on Theoretical Computational and Modelling Aspects of Inelastic Media written by B. Daya Reddy and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises papers based on some of the talks presented at the IUTAM Symposium of the same name, held in Cape Town, January 14-18, 2008. This volume treats cutting-edge issues in modelling, the behaviour of various classes of inelastic media, and associated algorithms for carrying out computational simulations. A key feature of the contributions are works directed at modelling behaviour at the meso and micro-scales, and at bridging the micro-macro scales.

Download or read book Mathematical Reviews written by and published by . This book was released on 2008 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Absorption Refrigeration Systems written by Ibrahim Dincer and published by Springer. This book was released on 2016-08-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed analysis of absorption refrigeration systems, covering single effect to multi-effect systems and their applications. Both the first and second laws of thermodynamics are discussed in relation to refrigeration systems to show how system performance differs from one law to another. Comparative energy and exergy analyses and assessments of single effect, double effect, triple effect and quadruple effect absorption refrigeration system are performed to illustrate the impact of an increase in the number of effects on system performance. In particular, the second law (exergy) formulation for absorption refrigeration systems, rarely discussed by other works, is covered in detail. Integrated Absorption Refrigeration Systems will help researchers, students and instructors in the formulation of energy and exergy efficiency equations for absorption refrigeration systems.

Download or read book Non Smooth and Complementarity Based Distributed Parameter Systems written by Michael Hintermüller and published by Springer Nature. This book was released on 2022-02-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the most challenging problems in the applied sciences involve non-differentiable structures as well as partial differential operators, thus leading to non-smooth distributed parameter systems. This edited volume aims to establish a theoretical and numerical foundation and develop new algorithmic paradigms for the treatment of non-smooth phenomena and associated parameter influences. Other goals include the realization and further advancement of these concepts in the context of robust and hierarchical optimization, partial differential games, and nonlinear partial differential complementarity problems, as well as their validation in the context of complex applications. Areas for which applications are considered include optimal control of multiphase fluids and of superconductors, image processing, thermoforming, and the formation of rivers and networks. Chapters are written by leading researchers and present results obtained in the first funding phase of the DFG Special Priority Program on Nonsmooth and Complementarity Based Distributed Parameter Systems: Simulation and Hierarchical Optimization that ran from 2016 to 2019.

Download or read book Research in Mathematics of Materials Science written by Malena I. Español and published by Springer Nature. This book was released on 2022-09-27 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights contributions of women mathematicians in the study of complex materials and includes both original research papers and reviews. The featured topics and methods draw on the fields of Calculus of Variations, Partial Differential Equations, Functional Analysis, Differential Geometry and Topology, as well as Numerical Analysis and Mathematical Modelling. Areas of applications include foams, fluid-solid interactions, liquid crystals, shape-memory alloys, magnetic suspensions, failure in solids, plasticity, viscoelasticity, homogenization, crystallization, grain growth, and phase-field models.

Download or read book Mathematical Tools for Physicists written by Michael Grinfeld and published by John Wiley & Sons. This book was released on 2014-11-05 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition is significantly updated and expanded. This unique collection of review articles, ranging from fundamental concepts up to latest applications, contains individual contributions written by renowned experts in the relevant fields. Much attention is paid to ensuring fast access to the information, with each carefully reviewed article featuring cross-referencing, references to the most relevant publications in the field, and suggestions for further reading, both introductory as well as more specialized. While the chapters on group theory, integral transforms, Monte Carlo methods, numerical analysis, perturbation theory, and special functions are thoroughly rewritten, completely new content includes sections on commutative algebra, computational algebraic topology, differential geometry, dynamical systems, functional analysis, graph and network theory, PDEs of mathematical physics, probability theory, stochastic differential equations, and variational methods.

Download or read book Mathematics of Complexity and Dynamical Systems written by Robert A. Meyers and published by Springer Science & Business Media. This book was released on 2011-10-05 with total page 1885 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics of Complexity and Dynamical Systems is an authoritative reference to the basic tools and concepts of complexity, systems theory, and dynamical systems from the perspective of pure and applied mathematics. Complex systems are systems that comprise many interacting parts with the ability to generate a new quality of collective behavior through self-organization, e.g. the spontaneous formation of temporal, spatial or functional structures. These systems are often characterized by extreme sensitivity to initial conditions as well as emergent behavior that are not readily predictable or even completely deterministic. The more than 100 entries in this wide-ranging, single source work provide a comprehensive explication of the theory and applications of mathematical complexity, covering ergodic theory, fractals and multifractals, dynamical systems, perturbation theory, solitons, systems and control theory, and related topics. Mathematics of Complexity and Dynamical Systems is an essential reference for all those interested in mathematical complexity, from undergraduate and graduate students up through professional researchers.