Download or read book Vulcanization of Elastomers written by Glen Alliger and published by . This book was released on 1964 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.
Download or read book Mixing of Vulcanisable Rubbers and Thermoplastic Elastomers written by P. R. Wood and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the current state-of-the-art in mixing from a practical viewpoint. It begins by offering historical background against which the latest developments are set. It considers both batch and continuous systems, containing details of key developments by equipment manufacturers, with the different concepts discussed in layman's terms. This report also summarises the range of mixing techniques applied in the industry as well as methods for monitoring mixing quality both off- and on-line are also covered. Recent academic research in rubber mixing is briefly considered, providing an indication of possible future practical advances in this field. This review of rubber mixing is supported by an indexed section containing several hundred key references and abstracts selected from the Rapra Abstracts database.
Download or read book Organic Chemistry of Sulfur written by S. Oae and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years organic sulfur chemistry has been growing at an even faster pace than the very rapid development in other fields of chemistry. This phenomenal growth is undoubtedly a reflection of industrial and public demands: not only was sulfur recently in overall surplus for the first time in the history of the chemical industry but it has now become a prin cipal environmental hazard in the form of sulfur dioxide, sulfuric acid and hydrogen sulfide. Another reason, discernible in the last fifteen years, has been the desire, on the part of individual chemists and all types of research managers, to move away from the established chemistry of carbon into the less well understood and sometimes virgin chemistries of the other elements which form covalent bonds. As a result of this movement the last decade has seen the development of sulfur chemistry into a well-organized and now much better understood branch of organic chemistry. Enough of the detail has become clear to see mechanistic interrelationships between previously unconnected reactions and with this clarification the whole subject has in tum become systema tized and subdivided. The divalent sulfur chemistry of thiols, monosulfides, disulfides and polysulfides is a large area in itself, much of it devoted to oxidation-reduction and the breakage and formation of sulfur-sulfur bonds, although interesting discoveries are now being made about the reac tivity of certain sulfur-carbon bonds. Of course, this area has its own mas sive biochemical branch involving enzymes and proteins.
Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Download or read book Elastomers and Rubber Compounding Materials written by I Franta and published by Elsevier. This book was released on 2012-12-02 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomers and Rubber Compounding Materials reviews the properties of elastomers and particular groups of ingredients and chemicals mixed into the basic elastomer to form a rubber compound. After introducing the history of rubber industry and the general properties of rubber, the book discusses the properties, classification, concentration, stabilization, modification, application, transport, and storage of latex. It presents as well the methods of production, composition, physical properties, and chemical reactions of dry rubber. The book then focuses on the production and classification of different synthetic rubbers, such as styrene-butadiene, isoprene, butadiene, ethylene-propylene, and chloroprene. It also discusses the production, properties, and applications of elastomers, vulcanization chemicals, fillers, stabilizers, plasticizers, blowing agents, and textile reinforcing materials used in formulating rubber compounds. This book will be of great value not only to those who are in the rubber industry, but also to students of polymer science and rubber technology.
Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties Explores novel applications of natural rubber across a range of industries, including current and potential uses Discusses resources and utilization, and considers sustainable future development of natural rubber
Download or read book Handbook of Specialty Elastomers written by Robert C. Klingender and published by CRC Press. This book was released on 2008-01-22 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written and edited by experts on specialty elastomers applications in the mechanical and automotive products industries, the Handbook of Specialty Elastomers provides a single source reference for the design of compounds using specialty elastomers. This book defines specialty elastomers as heat-, oil-, fuel-, and solvent-resistant polymer
Download or read book Rubber Curing Systems written by R. N. Datta and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the different types of curing systems available today for different rubber types, including natural rubber, SBR, NBR, BR, IIR, CR, XIIR and EPDM. The uses of primary and secondary accelerators, prevulcanisation inhibitors (PVIs) and antireversion chemicals are outlined.Typical rubber formulations for applications in industrial rubber products and tyres are given. Cure systems are described and compared with extensive tables of data on formulae and compound properties. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Download or read book Science and Technology of Rubber written by Frederick R. Eirich and published by Elsevier. This book was released on 2012-12-02 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Rubber covers the most important aspects of rubber science and technology, from synthesis and structure to elasticity and flow, blending, filling, and cross-linking. Polymerization and copolymerization, the rheological behavior of unvulcanized rubber, vulcanization, reinforcement of elastomers by particulate fillers, and the chemical modification of polymers are also discussed. This book is comprised of 14 chapters; the first ten of which take the reader from an introduction through synthesis characterization, mechanical behavior, and flow to the major processing steps of filling, compounding, and vulcanization and to the theories and measurement of elastomeric performance, leaning strongly on the ""materials"" approach. The next three chapters deal with blended, modified, and thermoplastic elastomers, touching on topics such as polymer esterification, etherification, hydrolysis, and hydrogenation as well as the influence of blending on the properties of elastomer/plastic blends, especially impact strength and crack resistance. The book concludes with a chapter on tire manufacture and engineering, with emphasis on the geometric, structural, and chemical aspects of tire. This book will be of vital interest to students, practitioners, and research and development managers, as well as to anyone interested in the unusual chemistry and physics and the outstanding properties and usefulness of elastomers.
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2014-06-28 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Rubber, Second Edition provides a general survey of elastomers and an examination of rubberlike elasticity, with an emphasis on a unified treatment ranging from physical theory to final applications. Researchers in polymer science and engineering fields will find coverage of recent advances, unsolved problems and projections, and processing. Expanded coverage Updated chapters featuring substantially more information A unified treatment of the subject, with comprehensive coverage ranging from chemical aspects such as elastomer synthesis and curing, through theoretical developments and characterization of equilibrium and dynamic properties, to final applications
Download or read book Advanced Elastomers written by Anna Boczkowska and published by BoD – Books on Demand. This book was released on 2012-09-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an extensive overview of current trends in the area of elastomers and their composites from the chapters contributed by internationally recognized specialists. The book deals with novel synthesis, modelling and experimental methods in elastomers. Contents include: new approach to crosslinking, liquid crystal elastomers, nanocomposites, smart elastomers, elastomers in microelectronics and microfluidics, elastomers in cement concrete and mortar, experimental testing and modelling. Each section demonstrates how enhancements in materials, processes and characterization techniques can improve performance in the field of engineering. The book provides a unique opportunity to discover the latest research on elastomer advances from laboratories around the world. This book addresses to industrial and academic researchers in the fields of physical, chemical, biological sciences and engineering.
Download or read book High Pressure Vulcanization of Elastomers written by Lalit Singh Kochar and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.
Download or read book Self Healing Smart Materials written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book describes the design, synthesis, mechanisms, characterization, fundamental properties, functions and development of self-healing smart materials and their composites with their allied applications. It covers cementitious concrete composites, bleeding composites, elastomers, tires, membranes, and composites in energy storage, coatings, shape-memory, aerospace and robotic applications. The 21 chapters are written by researchers from a variety of disciplines and backgrounds.
Download or read book NMR Methods for Characterization of Synthetic and Natural Polymers written by Rongchun Zhang and published by Royal Society of Chemistry. This book was released on 2019-08-02 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the introduction of FT-NMR spectroscopy around five decades ago, NMR has achieved significant advances in hardware and methodologies, accompanied with the enhancement of spectral resolution and signal sensitivity. Rapid developments in the polymers field mean that accurate and quantitative characterization of polymer structures and dynamics is the keystone for precisely regulating and controlling the physical and chemical properties of the polymer. This book specifically focuses on NMR investigation of complex polymers for the polymer community as well as NMR spectroscopists, and will push the development of both fields. It covers the latest advances, for example high field DNP and ultrafast MAS methodologies, and show how these novel NMR methods characterize various synthetic and natural polymers.