Download or read book Vibrations of Elastic Systems written by Edward B. Magrab and published by Springer Nature. This book was released on with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Random vibrations of elastic systems written by V.V. Bolotin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of random vibrations of elastic systems has gained, over the past decades, great importance, specifically due to its relevance to technical problems in hydro- and aero-mechanics. Such problems involve aircraft, rockets and oil-drilling platforms; elastic vibrations of structures caused by acoustic radiation of a jet stream and by seismic disturbances must also be included. Appli cations of the theory of random vibrations are indeed numerous and the development of this theory poses a challenge to mathematicians, mechanicists and engineers. Therefore, a book on random vibrations by a leading authority such as Dr. V.V. Bolotin must be very welcome to anybody working in this field. It is not surprising that efforts were soon made to have the book translated into English. With pleasure I acknowledge the co-operation of the very competent translater, I Shenkman; of Mrs. C. Jones, who typeJ the first draft; and of Th. Brunsting, P. Keskikiikonen and R. Piche, who read it and suggested where required, corrections and changes. I express my gratitude to Martinus Nijhoff Publishers BV for entrust ing me with the task of editing the English translation, and to F.J. van Drunen, publishers of N. Nijhoff Publishers BV, who so kindly supported my endeavours. Special acknowledgement is due to Mrs. L. Strouth, Solid Mechanics Division, University of Waterloo, for her competent and efficient preparation of the final manuscript.
Download or read book Mechanical Vibrations of Elastic Systems written by Roy and published by Asian Books Private Limited. This book was released on 2006 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Presents The Topic Of Vibtations Comprehensively In Terms Of Principles Of Dynamics- Forces, Responses, Analysis, Solutions, Examples, Measurement, Interpretation, Control And Probabilistic Approaches. Idealised Discrete Systems As Well As Continuous Systems Are Discussed In Detail. A Wide Array Of Numerical Methods Used In Vibration Analysis Are Presented In View Of Their Enormous Popularity, Adaptability Using Personal Computers. A Large Number Of Examples Have Been Worked Out To Help An Easy Understanding Of Even The Difficult Topics In Vibration Analysis And Control.
Download or read book Vibrations of Elastic Systems written by Edward B. Magrab and published by Springer Science & Business Media. This book was released on 2012-01-12 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a unified approach to the vibrations of elastic systems as applied to MEMS devices, mechanical components, and civil structures. Applications include atomic force microscopes, energy harvesters, and carbon nanotubes and consider such complicating effects as squeeze film damping, viscous fluid loading, in-plane forces, and proof mass interactions with their elastic supports. These effects are analyzed as single degree-of-freedom models and as more realistic elastic structures. The governing equations and boundary conditions for beams, plates, and shells with interior and boundary attachments are derived by applying variational calculus to an expression describing the energy of the system. The advantages of this approach regarding the generation of orthogonal functions and the Rayleigh-Ritz method are demonstrated. A large number of graphs and tables are given to show the impact of various factors on the systems’ natural frequencies, mode shapes, and responses.
Download or read book Mechanical Vibrations of Elastic Systems written by N. S. V. Kameswara Rao and published by . This book was released on 2006 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface Acknowledgements List of Figures List of Tables List of Abbreviations/Photographs Chapter 1 Introduction Chapter 2 Basic Concept Chapter 3 Discrete System Chapter 4 Multi Degree of Freedom system Chapter 5 Numerical Methods-Free Vibrations Chapter 6 Numerical Methods-forced Vibrations Chapter 7 Continuous Systems and Elastic Media Chapter 8 Nonlinear Vibrations Chapter 9 Random Vibrations Chapter 10 Finite Element Method Chapter 11 Vibration Isolation and Control Appendices Name Index Subject Index.
Download or read book Vibration of Continuous Systems written by Singiresu S. Rao and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.
Download or read book Vibrations of Elastic Plates written by Yi-Yuan Yu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on my experiences as a teacher and as a researcher for more than four decades. When I started teaching in the early 1950s, I became interested in the vibrations of plates and shells. Soon after I joined the Polytechnic Institute of Brooklyn as a professor, I began working busily on my research in vibrations of sandwich and layered plates and shells, and then teaching a graduate course on the same subject. Although I tried to put together my lecture notes into a book, I never finished it. Many years later, I came to the New Jersey Institute of Technology as the dean of engineering. When I went back to teaching and looked for some research areas to work on, I came upon laminated composites and piezoelectric layers, which appeared to be natural extensions of sandwiches. Working on these for the last several years has brought me a great deal of joy, since I still am able to find my work relevant. At least I can claim that I still am pursuing life-long learning as it is advocated by educators all over the country. This book is based on the research results I accumulated during these two periods of my work, the first on vibrations and dynamical model ing of sandwiches, and the second on laminated composites and piezoelec tric layers.
Download or read book Introduction to continuum damage mechanics written by L. Kachanov and published by Springer Science & Business Media. This book was released on 1986-05-31 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.
Download or read book Vibrations of Elastic Systems written by Edward B. Magrab and published by Springer. This book was released on 2024-07-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new topics such as Inerters in spring-mass models and attached to beams; fluid loading on beams, plates, and shells; bio-inspired vibration isolation and absorption; coupled bending and torsion of beams; beams with functionally graded materials; as well as a new chapter on the Mindlin/Timoshenko plate theory: rectangular and circular. New applications and enhancements to the previous edition include moving mass on beams; thin beams with attached pendulum; transient response of beams with in-span attachments; and shells to model blood flow in arteries.
Download or read book Vibrations and Waves in Continuous Mechanical Systems written by Peter Hagedorn and published by John Wiley & Sons. This book was released on 2007-10-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of vibrations is of fundamental importance in engineering and technology. Discrete modelling is sufficient to understand the dynamics of many vibrating systems; however a large number of vibration phenomena are far more easily understood when modelled as continuous systems. The theory of vibrations in continuous systems is crucial to the understanding of engineering problems in areas as diverse as automotive brakes, overhead transmission lines, liquid filled tanks, ultrasonic testing or room acoustics. Starting from an elementary level, Vibrations and Waves in Continuous Mechanical Systems helps develop a comprehensive understanding of the theory of these systems and the tools with which to analyse them, before progressing to more advanced topics. Presents dynamics and analysis techniques for a wide range of continuous systems including strings, bars, beams, membranes, plates, fluids and elastic bodies in one, two and three dimensions. Covers special topics such as the interaction of discrete and continuous systems, vibrations in translating media, and sound emission from vibrating surfaces, among others. Develops the reader’s understanding by progressing from very simple results to more complex analysis without skipping the key steps in the derivations. Offers a number of new topics and exercises that form essential steppingstones to the present level of research in the field. Includes exercises at the end of the chapters based on both the academic and practical experience of the authors. Vibrations and Waves in Continuous Mechanical Systems provides a first course on the vibrations of continuous systems that will be suitable for students of continuous system dynamics, at senior undergraduate and graduate levels, in mechanical, civil and aerospace engineering. It will also appeal to researchers developing theory and analysis within the field.
Download or read book Optimal Control Theory for the Damping of Vibrations of Simple Elastic Systems written by V. Komkov and published by Springer. This book was released on 2006-11-15 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Mathematical Theory of Vibrations of Elastic Plates written by Raymond David Mindlin and published by World Scientific. This book was released on 2006 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by the late R D Mindlin is destined to become a classic introduction to the mathematical aspects of two-dimensional theories of elastic plates. It systematically derives the two-dimensional theories of anisotropic elastic plates from the variational formulation of the three-dimensional theory of elasticity by power series expansions. The uniqueness of two-dimensional problems is also examined from the variational viewpoint. The accuracy of the two-dimensional equations is judged by comparing the dispersion relations of the waves that the two-dimensional theories can describe with prediction from the three-dimensional theory. Discussing mainly high-frequency dynamic problems, it is also useful in traditional applications in structural engineering as well as provides the theoretical foundation for acoustic wave devices.
Download or read book Vibration of solids and structures under moving loads written by L. Frýba and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport engineering structures are subjected to loads that vary in both time and space. In general mechanics parlance such loads are called moving loads. It is the aim of the book to analyze the effects of this type of load on various elements, components, structures and media of engineering me chanics. In recent years all branches of transport have experienced great advances characterized by increasingly higher speeds and weights of vehicles. As a result, structures and media over or in which the vehicles move have been subjected to vibrations and dynamic stresses far larger than ever before. The author has studied vibrations of elastic and inelastic bodies and structures under the action of moving loads for many years. In the course of his career he has published a number of papers dealing with various aspects of the problem. On the strength of his studies he has arrived at the conclusion that the topic has so grown in scope and importance as to merit a comprehensive treatment. The book is the outcome of his attempt to do so in a single monograph.
Download or read book Engineering Vibration Analysis written by Valery A. Svetlitsky and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constantly increasing attention is paid in the course 'Vibration 'Theory' to vibration of mechanical systems with distributed parameters, since the real elements of machines, devices, and constructions are made of materials that are not perfectly rigid. 'Therefore, vibrations of the objects including, for ex ample, rod elastic elements excite the vibrations of these elements, which can produce a substantial effect on dynamic characteristics of moving objects and on readings of instruments. For a mechanical engineer working in the field of design of new technolo gies the principal thing is his know-how in developing the sophisticated math ematical models in which all specific features of operation of the objects under design in real conditions are meticulously taken into account. So, the main emphasis in this book is made on the methods of derivation of equations and on the algorithms of solving them (exactly or approximately) taking into con sideration all features of actual behavior of the forces acting upon elastic rod elements. 'The eigen value and eigen vector problems are considered at vibrations of curvilinear rods (including the rods with concentrated masses). Also consid ered are the problems with forced vibrations. When investigating into these problems an approximate method of numerical solution of the systems of lin ear differential equations in partial derivatives is described, which uses the principle of virtual displacements. Some problems are more complicated than others and can be used for practical works of students and their graduation theses.
Download or read book Vibration and Coupling of Continuous Systems written by Jacqueline Sanchez Hubert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real problems concerning vibrations of elastic structures are among the most fascinating topics in mathematical and physical research as well as in applications in the engineering sciences. This book addresses the student familiar with the elementary mechanics of continua along with specialists. The authors start with an outline of the basic methods and lead the reader to research problems of current interest. An exposition of the method of spectra, asymptotic methods and perturbation is followed by applications to linear problems where elastic structures are coupled to fluids in bounded and unbounded domains, to radiation of immersed bodies, to local vibrations, to thermal effects and many more.
Download or read book Vibrations of Elastic Structural Members written by Edward Magrab and published by Springer. This book was released on 2010-12-25 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Analysis written by Rao V. Dukkipati and published by Alpha Science Int'l Ltd.. This book was released on 2004 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses in a concise but through manner fundamental statement of the theory, principles and methods of mechanical vibrations.
