Download or read book Vibration of Mechanical Systems written by Alok Sinha and published by Cambridge University Press. This book was released on 2010-10-18 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook for a first course in mechanical vibrations. There are many books in this area that try to include everything, thus they have become exhaustive compendiums, overwhelming for the undergraduate. In this book, all the basic concepts in mechanical vibrations are clearly identified and presented in a concise and simple manner with illustrative and practical examples. Vibration concepts include a review of selected topics in mechanics; a description of single-degree-of-freedom (SDOF) systems in terms of equivalent mass, equivalent stiffness, and equivalent damping; a unified treatment of various forced response problems (base excitation and rotating balance); an introduction to systems thinking, highlighting the fact that SDOF analysis is a building block for multi-degree-of-freedom (MDOF) and continuous system analyses via modal analysis; and a simple introduction to finite element analysis to connect continuous system and MDOF analyses. There are more than sixty exercise problems, and a complete solutions manual. The use of MATLAB® software is emphasized.
Download or read book Random Vibration in Mechanical Systems written by Stephen H. Crandall and published by Academic Press. This book was released on 2014-05-12 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Random Vibration in Mechanical Systems focuses on the fundamental facts and theories of random vibration in a form particularly applicable to mechanical engineers. The book first offers information on the characterization and transmission of random vibration. Discussions focus on the normal or Gaussian random process; excitation-response relations for stationary random processes; response of a single-degree-of-freedom system to stationary random excitation; wide-band and narrow-band random processes; and frequency decomposition of stationary random processes. The text then examines failure due to random vibration, including failure due to first excursion up to a certain level; fatigue failure due to a stationary narrow-band random stress process; failure due to an accumulation of damage; failure due to response remaining above a certain level for too great a fraction of the time; and failure mechanisms. The manuscript is a vital reference for mechanical engineers and researchers interested in random vibration in mechanical systems.
Download or read book System Dynamics and Mechanical Vibrations written by Dietmar Findeisen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of "linear systems analysis" applied to dynamic systems as an approach to interdisciplinary system design beyond the related area of electrical engineering. The text gives an interpretation of mechanical vibrations based on the theory of dynamic systems, aiming to bridge the gap between existing theoretical methods in different engineering disciplines and to enable advanced students or professionals to model dynamic and vibrating systems with reference to communication and control processes. Emphasizing the theory it presents a balanced coverage of analytical principles and applications to vibrations with regard to mechatronic problems.
Download or read book Vibrations and Waves in Continuous Mechanical Systems written by Peter Hagedorn and published by John Wiley & Sons. This book was released on 2007-10-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of vibrations is of fundamental importance in engineering and technology. Discrete modelling is sufficient to understand the dynamics of many vibrating systems; however a large number of vibration phenomena are far more easily understood when modelled as continuous systems. The theory of vibrations in continuous systems is crucial to the understanding of engineering problems in areas as diverse as automotive brakes, overhead transmission lines, liquid filled tanks, ultrasonic testing or room acoustics. Starting from an elementary level, Vibrations and Waves in Continuous Mechanical Systems helps develop a comprehensive understanding of the theory of these systems and the tools with which to analyse them, before progressing to more advanced topics. Presents dynamics and analysis techniques for a wide range of continuous systems including strings, bars, beams, membranes, plates, fluids and elastic bodies in one, two and three dimensions. Covers special topics such as the interaction of discrete and continuous systems, vibrations in translating media, and sound emission from vibrating surfaces, among others. Develops the reader’s understanding by progressing from very simple results to more complex analysis without skipping the key steps in the derivations. Offers a number of new topics and exercises that form essential steppingstones to the present level of research in the field. Includes exercises at the end of the chapters based on both the academic and practical experience of the authors. Vibrations and Waves in Continuous Mechanical Systems provides a first course on the vibrations of continuous systems that will be suitable for students of continuous system dynamics, at senior undergraduate and graduate levels, in mechanical, civil and aerospace engineering. It will also appeal to researchers developing theory and analysis within the field.
Download or read book Mechanical Systems written by Roger F. Gans and published by Springer. This book was released on 2014-09-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential textbook concerns analysis and control of engineering mechanisms, which includes almost any apparatus with moving parts used in daily life, from musical instruments to robots. A particular characteristic of this book is that it presents with considerable breadth and rigor both vibrations and controls. Many contemporary texts combine both of these topics in a single, one term course. This text supports the more favorable circumstance where the material is covered in a one year sequence contains enough material for a two semester sequence, but it can also be used in a single semester course combining two topics. “Mechanical Systems: A Unified Approach to Vibrations and Controls” presents a common notation and approach to these closely related areas. Examples from the both vibrations and controls components are integrated throughout this text.
Download or read book Random Vibrations written by Loren D. Lutes and published by Butterworth-Heinemann. This book was released on 2004 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of Random Vibrations is the behavior of structural and mechanical systems when they are subjected to unpredictable, or random, vibrations. These vibrations may arise from natural phenomena such as earthquakes or wind, or from human-controlled causes such as the stresses placed on aircraft at takeoff and landing. Study and mastery of this topic enables engineers to design and maintain structures capable of withstanding random vibrations, thereby protecting human life. Random Vibrations will lead readers in a user-friendly fashion to a thorough understanding of vibrations of linear and nonlinear systems that undergo stochastic-random-excitation. Provides over 150 worked out example problems and, along with over 225 exercises, illustrates concepts with true-to-life engineering design problems Offers intuitive explanations of concepts within a context of mathematical rigor and relatively advanced analysis techniques. Essential for self-study by practicing engineers, and for instruction in the classroom.
Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.
Download or read book Advanced Mechanical Vibrations written by Paolo L. Gatti and published by CRC Press. This book was released on 2022-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and solid exposition of the fundamental concepts of linear vibrations that apply in many specialised disciplines across engineering and science.
Download or read book Mechanical Vibrations and Condition Monitoring written by Juan Carlos A. Jauregui Correa and published by Academic Press. This book was released on 2020-03-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations and Condition Monitoring presents a collection of data and insights on the study of mechanical vibrations for the predictive maintenance of machinery. Seven chapters cover the foundations of mechanical vibrations, spectrum analysis, instruments, causes and effects of vibration, alignment and balancing methods, practical cases, and guidelines for the implementation of a predictive maintenance program. Readers will be able to use the book to make predictive maintenance decisions based on vibration analysis. This title will be useful to senior engineers and technicians looking for practical solutions to predictive maintenance problems. However, the book will also be useful to technicians looking to ground maintenance observations and decisions in the vibratory behavior of machine components. Presents data and insights into mechanical vibrations in condition monitoring and the predictive maintenance of industrial machinery Defines the key concepts related to mechanical vibration and its application for predicting mechanical failure Describes the dynamic behavior of most important mechanical components found in industrial machinery Explains fundamental concepts such as signal analysis and the Fourier transform necessary to understand mechanical vibration Provides analysis of most sources of failure in mechanical systems, affording an introduction to more complex signal analysis
Download or read book Nonlinear Vibrations in Mechanical and Electrical Systems written by James Johnston Stoker and published by . This book was released on 1966 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Mechanical Vibrations written by Ronald J. Anderson and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth introduction to the foundations of vibrations for students of mechanical engineering For students pursuing their education in Mechanical Engineering, An Introduction to Mechanical Vibrations is a definitive resource. The text extensively covers foundational knowledge in the field and uses it to lead up to and include: finite elements, the inerter, Discrete Fourier Transforms, flow-induced vibrations, and self-excited oscillations in rail vehicles. The text aims to accomplish two things in a single, introductory, semester-length, course in vibrations. The primary goal is to present the basics of vibrations in a manner that promotes understanding and interest while building a foundation of knowledge in the field. The secondary goal is to give students a good understanding of two topics that are ubiquitous in today's engineering workplace - finite element analysis (FEA) and Discrete Fourier Transforms (the DFT- most often seen in the form of the Fast Fourier Transform or FFT). FEA and FFT software tools are readily available to both students and practicing engineers and they need to be used with understanding and a degree of caution. While these two subjects fit nicely into vibrations, this book presents them in a way that emphasizes understanding of the underlying principles so that students are aware of both the power and the limitations of the methods. In addition to covering all the topics that make up an introductory knowledge of vibrations, the book includes: ● End of chapter exercises to help students review key topics and definitions ● Access to sample data files, software, and animations via a dedicated website
Download or read book Mechanical Vibration written by William John Palm and published by . This book was released on 2007 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model, analyze, and solve vibration problems, using modern computer tools. Featuring clear explanations, worked examples, applications, and modern computer tools, William Palm's Mechanical Vibration provides a firm foundation in vibratory systems. You'll learn how to apply knowledge of mathematics and science to model and analyze systems ranging from a single degree of freedom to complex systems with two and more degrees of freedom. Separate MATLAB sections at the end of most chapters show how to use the most recent features of this standard engineering tool, in the context of solving vibration problems. The text introduces Simulink where solutions may be difficult to program in MATLAB, such as modeling Coulomb friction effects and simulating systems that contain non-linearities. Ample problems throughout the text provide opportunities to practice identifying, formulating, and solving vibration problems. KEY FEATURES Strong pedagogical approach, including chapter objectives and summaries Extensive worked examples illustrating applications Numerous realistic homework problems Up-to-date MATLAB coverage The first vibration textbook to cover Simulink Self-contained introduction to MATLAB in Appendix A Special section dealing with active vibration control in sports equipment Special sections devoted to obtaining parameter values from experimental data
Download or read book Vibration of Continuous Systems written by Singiresu S. Rao and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.
Download or read book Vibration in Mechanical Systems written by Cho Wing S. To and published by Cambridge Scholars Publishing. This book was released on 2023-12-15 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the physical background and basic concepts of vibration, mathematical modeling of linear vibrations in discrete and continuous mechanical systems and offers theoretical solutions for vibration problems, and provides dynamical analysis of vibration, engineering applications of vibration. Vibration phenomena exist widely in nature and engineering, and vibration analysis and computation are of important significance in science and in technology. In recent years, great progress has been made in vibration analysis and computation for increasingly complex systems by advances in technology. Therefore, the contents of courses on vibration should be improved and strengthened to meet the requirement of today’s technology education. As an introductory textbook for undergraduate students, this book presents the physical background, mathematical modeling, analytical solutions, mechanical analysis on linear vibrations in both discrete-time and continuous-time systems, as well as some typical examples in engineering application.
Download or read book Mechanical Vibrations written by Tony L. Schmitz and published by Springer Science & Business Media. This book was released on 2011-09-17 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations: Modeling and Measurement describes essential concepts in vibration analysis of mechanical systems. It incorporates the required mathematics, experimental techniques, fundamentals of model analysis, and beam theory into a unified framework that is written to be accessible to undergraduate students, researchers, and practicing engineers. To unify the various concepts, a single experimental platform is used throughout the text. Engineering drawings for the platform are included in an appendix. Additionally, MATLAB programming solutions are integrated into the content throughout the text.
Download or read book Oscillation Matrices and Kernels and Small Vibrations of Mechanical Systems written by Feliks Ruvimovich Gantmakher and published by American Mathematical Soc.. This book was released on 1961 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exposition is self-contained. The first chapter presents all necessary results (with proofs) on the theory of matrices which are not included in a standard linear algebra course. The only prerequisite in addition to standard linear algebra is the theory of linear integral equations used in Chapter 5. The book is suitable for graduate students, research mathematicians and engineers interested in ordinary differential equations, integral equations, and theirapplications.
Download or read book Mechanical Vibrations 2nd Edition written by Mehta J.S. and Kailey A.S. and published by S. Chand Publishing. This book was released on with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written specifically for the students of Mechanical Engineering, "Mechanical Vibrations" is a succinctly written textbook. Without being verbose, the textbook delves into all concepts related to the subject and deals with them in a laconic manner. Concepts such as Freedom Systems, Vibration Measurement and Transient Vibrations have been treated well for the student to get profounder knowledge in the subject.
