Download or read book Mechanical Systems written by Roger F. Gans and published by Springer. This book was released on 2014-09-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential textbook concerns analysis and control of engineering mechanisms, which includes almost any apparatus with moving parts used in daily life, from musical instruments to robots. A particular characteristic of this book is that it presents with considerable breadth and rigor both vibrations and controls. Many contemporary texts combine both of these topics in a single, one term course. This text supports the more favorable circumstance where the material is covered in a one year sequence contains enough material for a two semester sequence, but it can also be used in a single semester course combining two topics. “Mechanical Systems: A Unified Approach to Vibrations and Controls” presents a common notation and approach to these closely related areas. Examples from the both vibrations and controls components are integrated throughout this text.

Download or read book Vibration of Mechanical Systems written by Alok Sinha and published by Cambridge University Press. This book was released on 2010-10-18 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook for a first course in mechanical vibrations. There are many books in this area that try to include everything, thus they have become exhaustive compendiums, overwhelming for the undergraduate. In this book, all the basic concepts in mechanical vibrations are clearly identified and presented in a concise and simple manner with illustrative and practical examples. Vibration concepts include a review of selected topics in mechanics; a description of single-degree-of-freedom (SDOF) systems in terms of equivalent mass, equivalent stiffness, and equivalent damping; a unified treatment of various forced response problems (base excitation and rotating balance); an introduction to systems thinking, highlighting the fact that SDOF analysis is a building block for multi-degree-of-freedom (MDOF) and continuous system analyses via modal analysis; and a simple introduction to finite element analysis to connect continuous system and MDOF analyses. There are more than sixty exercise problems, and a complete solutions manual. The use of MATLAB® software is emphasized.

Download or read book Modeling and Control of Vibration in Mechanical Systems written by Chunling Du and published by CRC Press. This book was released on 2018-09-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the ox carts and pottery wheels the spacecrafts and disk drives, efficiency and quality has always been dependent on the engineer’s ability to anticipate and control the effects of vibration. And while progress in negating the noise, wear, and inefficiency caused by vibration has been made, more is needed. Modeling and Control of Vibration in Mechanical Systems answers the essential needs of practitioners in systems and control with the most comprehensive resource available on the subject. Written as a reference for those working in high precision systems, this uniquely accessible volume: Differentiates between kinds of vibration and their various characteristics and effects Offers a close-up look at mechanical actuation systems that are achieving remarkably high precision positioning performance Includes techniques for rejecting vibrations of different frequency ranges Covers the theoretical developments and principles of control design with detail elaborate enough that readers will be able to apply the techniques with the help of MATLAB® Details a wealth of practical working examples as well as a number of simulation and experimental results with comprehensive evaluations The modern world’s ever-growing spectra of sophisticated engineering systems such as hard disk drives, aeronautic systems, and manufacturing systems have little tolerance for unanticipated vibration of even the slightest magnitude. Accordingly, vibration control continues to draw intensive focus from top control engineers and modelers. This resource demonstrates the remarkable results of that focus to date, and most importantly gives today’s researchers the technology that they need to build upon into the future. Chunling Du is currently researching modeling and advanced servo control of hard disk drives at the Data Storage Institute in Singapore. Lihua Xie is the Director of the Centre for Intelligent Machines and a professor at Nanyang Technological University in Singapore.

Download or read book Vibrations and Waves in Continuous Mechanical Systems written by Peter Hagedorn and published by John Wiley & Sons. This book was released on 2007-10-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of vibrations is of fundamental importance in engineering and technology. Discrete modelling is sufficient to understand the dynamics of many vibrating systems; however a large number of vibration phenomena are far more easily understood when modelled as continuous systems. The theory of vibrations in continuous systems is crucial to the understanding of engineering problems in areas as diverse as automotive brakes, overhead transmission lines, liquid filled tanks, ultrasonic testing or room acoustics. Starting from an elementary level, Vibrations and Waves in Continuous Mechanical Systems helps develop a comprehensive understanding of the theory of these systems and the tools with which to analyse them, before progressing to more advanced topics. Presents dynamics and analysis techniques for a wide range of continuous systems including strings, bars, beams, membranes, plates, fluids and elastic bodies in one, two and three dimensions. Covers special topics such as the interaction of discrete and continuous systems, vibrations in translating media, and sound emission from vibrating surfaces, among others. Develops the reader’s understanding by progressing from very simple results to more complex analysis without skipping the key steps in the derivations. Offers a number of new topics and exercises that form essential steppingstones to the present level of research in the field. Includes exercises at the end of the chapters based on both the academic and practical experience of the authors. Vibrations and Waves in Continuous Mechanical Systems provides a first course on the vibrations of continuous systems that will be suitable for students of continuous system dynamics, at senior undergraduate and graduate levels, in mechanical, civil and aerospace engineering. It will also appeal to researchers developing theory and analysis within the field.

Download or read book Vibration Analysis and Control in Mechanical Structures and Wind Energy Conversion Systems written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2018-04-18 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.

Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.

Download or read book System Dynamics and Mechanical Vibrations written by Dietmar Findeisen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of "linear systems analysis" applied to dynamic systems as an approach to interdisciplinary system design beyond the related area of electrical engineering. The text gives an interpretation of mechanical vibrations based on the theory of dynamic systems, aiming to bridge the gap between existing theoretical methods in different engineering disciplines and to enable advanced students or professionals to model dynamic and vibrating systems with reference to communication and control processes. Emphasizing the theory it presents a balanced coverage of analytical principles and applications to vibrations with regard to mechatronic problems.

Download or read book Lyapunov Based Control of Mechanical Systems written by Marcio S. de Queiroz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of nonlinear controllers for mechanical systems has been an ex tremely active area of research in the last two decades. From a theoretical point of view, this attention can be attributed to their interesting dynamic behavior, which makes them suitable benchmarks for nonlinear control the oreticians. On the other hand, recent technological advances have produced many real-world engineering applications that require the automatic con trol of mechanical systems. the mechanism for de Often, Lyapunov-based techniques are utilized as veloping different nonlinear control structures for mechanical systems. The allure of the Lyapunov-based framework for mechanical system control de sign can most likely be assigned to the fact that Lyapunov function candi dates can often be crafted from physical insight into the mechanics of the system. That is, despite the nonlinearities, couplings, and/or the flexible effects associated with the system, Lyapunov-based techniques can often be used to analyze the stability of the closed-loop system by using an energy like function as the Lyapunov function candidate. In practice, the design procedure often tends to be an iterative process that results in the death of many trees. That is, the controller and energy-like function are often constructed in concert to foster an advantageous stability property and/or robustness property. Fortunately, over the last 15 years, many system the ory and control researchers have labored in this area to produce various design tools that can be applied in a variety of situations.

Download or read book Identification and Control of Mechanical Systems written by Jer-Nan Juang and published by Cambridge University Press. This book was released on 2001-08-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of vibrating systems is a significant issue in the design of aircraft, spacecraft, bridges and high-rise buildings. This 2001 book discusses the control of vibrating systems, integrating structural dynamics, vibration analysis, modern control and system identification. Integrating these subjects is an important feature in that engineers will need only one book, rather than several texts or courses, to solve vibration control problems. The book begins with a review of basic mathematics needed to understand subsequent material. Chapters then cover more recent and valuable developments in aerospace control and identification theory, including virtual passive control, observer and state-space identification, and data-based controller synthesis. Many practical issues and applications are addressed, with examples showing how various methods are applied to real systems. Some methods show the close integration of system identification and control theory from the state-space perspective, rather than from the traditional input-output model perspective of adaptive control. This text will be useful for advanced undergraduate and beginning graduate students in aerospace, mechanical and civil engineering, as well as for practising engineers.

Download or read book Vibration Damping Control and Design written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-04-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reducing and controlling the level of vibration in a mechanical system leads to an improved work environment and product quality, reduced noise, more economical operation, and longer equipment life. Adequate design is essential for reducing vibrations, while damping and control methods help further reduce and manipulate vibrations when design strat

Download or read book Vibration and Control of Mechanical Systems 2001 written by H. R. Hamidzadeh and published by . This book was released on 2001 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. Beards and published by Elsevier. This book was released on 1995-06-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion. All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.

Download or read book Geometric Control of Mechanical Systems written by Francesco Bullo and published by Springer. This book was released on 2019-06-12 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of analysis and control of mechanical systems using differential geometry is flourishing. This book collects many results over the last decade and provides a comprehensive introduction to the area.

Download or read book Dynamics of Controlled Mechanical Systems with Delayed Feedback written by H.Y. Hu and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed a rapid development of active control of various mechanical systems. With increasingly strict requirements for control speed and system performance, the unavoidable time delays in both controllers and actuators have become a serious problem. For instance, all digital controllers, analogue anti aliasing and reconstruction filters exhibit a certain time delay during operation, and the hydraulic actuators and human being interaction usually show even more significant time delays. These time delays, albeit very short in most cases, often deteriorate the control performance or even cause the instability of the system, be cause the actuators may feed energy at the moment when the system does not need it. Thus, the effect of time delays on the system performance has drawn much at tention in the design of robots, active vehicle suspensions, active tendons for tall buildings, as well as the controlled vibro-impact systems. On the other hand, the properly designed delay control may improve the performance of dynamic sys tems. For instance, the delayed state feedback has found its applications to the design of dynamic absorbers, the linearization of nonlinear systems, the control of chaotic oscillators, etc. Most controlled mechanical systems with time delays can be modeled as the dynamic systems described by a set of ordinary differential equations with time delays.

Download or read book Motion and Vibration Control written by Heinz Ulbrich and published by Springer Science & Business Media. This book was released on 2008-12-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion and vibration control is a fundamental technology for the development of advanced mechanical systems such as mechatronics, vehicle systems, robots, spacecraft, and rotating machinery. Often the implementation of high performance, low power consumption designs is only possible with the use of this technology. It is also vital to the mitigation of natural hazards for large structures such as high-rise buildings and tall bridges, and to the application of flexible structures such as space stations and satellites. Recent innovations in relevant hardware, sensors, actuators, and software have facilitated new research in this area. This book deals with the interdisciplinary aspects of emerging technologies of motion and vibration control for mechanical, civil and aerospace systems. It covers a broad range of applications (e.g. vehicle dynamics, actuators, rotor dynamics, biologically inspired mechanics, humanoid robot dynamics and control, etc.) and also provides advances in the field of fundamental research e.g. control of fluid/structure integration, nonlinear control theory, etc. Each of the contributors is a recognised specialist in his field, and this gives the book relevance and authority in a wide range of areas.

Download or read book Nonlinear Vibration with Control written by David Wagg and published by Springer. This book was released on 2014-11-03 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive discussion of nonlinear multi-modal structural vibration problems, and shows how vibration suppression can be applied to such systems by considering a sample set of relevant control techniques. It covers the basic principles of nonlinear vibrations that occur in flexible and/or adaptive structures, with an emphasis on engineering analysis and relevant control techniques. Understanding nonlinear vibrations is becoming increasingly important in a range of engineering applications, particularly in the design of flexible structures such as aircraft, satellites, bridges, and sports stadia. There is an increasing trend towards lighter structures, with increased slenderness, often made of new composite materials and requiring some form of deployment and/or active vibration control. There are also applications in the areas of robotics, mechatronics, micro electrical mechanical systems, non-destructive testing and related disciplines such as structural health monitoring. Two broader themes cut across these application areas: (i) vibration suppression – or active damping – and, (ii) adaptive structures and machines. In this expanded 2nd edition, revisions include: An additional section on passive vibration control, including nonlinear vibration mounts. A more in-depth description of semi-active control, including switching and continuous schemes for dampers and other semi-active systems. A complet e reworking of normal form analysis, which now includes new material on internal resonance, bifurcation of backbone curves and stability analysis of forced responses. Further analysis of the nonlinear dynamics of cables including internal resonance leading to whirling. Additional material on the vibration of systems with impact friction. The book is accessible to practitioners in the areas of application, as well as students and researchers working on related topics. In particular, the aim is to introduce the key concepts of nonlinear vibration to readers who have an understanding of linear vibration and/or linear control, but no specialist knowledge in nonlinear dynamics or nonlinear control.

Download or read book Vibration Dynamics and Control written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering,and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face p- found issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series f- turing graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate - ucation and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface After15yearssincethepublicationofVibrationofStructuresandMachines and three subsequent editions a deep reorganization and updating of the material was felt necessary. This new book on the subject of Vibration dynamics and control is organized in a larger number of shorter chapters, hoping that this can be helpful to the reader. New materialhas been added and many points have been updated. A larger number of examples and of exercises have been included.