Download or read book Vibrating Or Flashing Screens Investigating Fish s Ability to Avoid Screens and Louvers Using Vibrations and Strobe Lights as Deterrence written by and published by . This book was released on 2010 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book How Fish Detect Screens written by Timothy Dwight Mussen and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of vision and the lateral-line system in fish-screen and louver avoidance was investigated in marine and freshwater species, including shiner surfperch (Cymatogaster aggregata), staghorn sculpin (Leptocottus armatus), steelhead trout (Oncorhynchus mykiss), Chinook salmon (Oncorhynchus tshawytscha) and Sacramento splittail (Pogonichthys macrolepidotus). Fish were viewed swimming in front of screens and louvers in laboratory flumes. Experiments were conducted during the day (lighted) and night (dark, to limit vision). Streptomycin-sulfate treatments were used to block fish's lateral-line systems. The fish's lateral-line system was treated with the vital stain stained with 2-(4-(dimethylamino)styryl)-N-ethylpyridinium iodide (DASPEI) and viewed under a stereofluorescent microscope to verify the streptomycin treatment's effectiveness. Industrial vibrators and a strobe light directed at the screens and louvers were tested as possible behavioral deterrents. The total number of times a fish contacted the screens or louvers was analyzed as a measure of performance. All species tested contacted the screens significantly more often during the night. The response to the streptomycin, vibration and strobe-light treatments varied among species. More fish passed through the louvers than became impinged on the screens. Juvenile Chinook salmon passed through the louvers more frequently during the night and when swimming in faster currents. This research should benefit fisheries and water resources managers, regarding their-fish protection decisions. It also poses important questions for future research.

Download or read book Fish Passage Technologies written by and published by Office of Technology Assessment. This book was released on 1995 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fish Bioacoustics written by Jacqueline F. Webb and published by Springer Science & Business Media. This book was released on 2008-05-22 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new definitive volume on fish auditory systems will interest investigators in both basic research of fish bioacoustics as well as investigators in applied aspects of fisheries and resource management. Topics cover structure, physiology, localization, and acoustic behavior as well as more applied topics such as using sound to detect and locate fish.

Download or read book Guidelines for Design and Operation of Nighttime Traffic Control for Highway Maintenance and Construction written by James E. Bryden and published by Transportation Research Board. This book was released on 2002 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Historic Lighthouse Preservation Handbook written by and published by U.S. Government Printing Office. This book was released on 1997 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sound Source Localization written by Richard R. Fay and published by Springer Science & Business Media. This book was released on 2006-05-20 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Auditory Research presents a series of compreh- sive and synthetic reviews of the fundamental topics in modern auditory - search. The volumes are aimed at all individuals with interests in hearing research including advanced graduate students, postdoctoral researchers, and clinical investigators. The volumes are intended to introduce new investigators to important aspects of hearing science and to help established investigators to better understand the fundamental theories and data in ?elds of hearing that they may not normally follow closely. Each volume presents a particular topic comprehensively, and each serves as a synthetic overview and guide to the literature. As such, the chapters present neither exhaustive data reviews nor original research that has not yet appeared in peer-reviewed journals. The volumes focus on topics that have developed a solid data and conceptual foundation rather than on those for which a literature is only beginning to develop. New research areas will be covered on a timely basis in the series as they begin to mature.

Download or read book Expanded Cinema written by Gene Youngblood and published by Fordham University Press. This book was released on 2020-03-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiftieth anniversary reissue of the founding media studies book that helped establish media art as a cultural category. First published in 1970, Gene Youngblood’s influential Expanded Cinema was the first serious treatment of video, computers, and holography as cinematic technologies. Long considered the bible for media artists, Youngblood’s insider account of 1960s counterculture and the birth of cybernetics remains a mainstay reference in today’s hypermediated digital world. This fiftieth anniversary edition includes a new Introduction by the author that offers conceptual tools for understanding the sociocultural and sociopolitical realities of our present world. A unique eyewitness account of burgeoning experimental film and the birth of video art in the late 1960s, this far- ranging study traces the evolution of cinematic language to the end of fiction, drama, and realism. Vast in scope, its prescient formulations include “the paleocybernetic age,” “intermedia,” the “artist as design scientist,” the “artist as ecologist,” “synaesthetics and kinesthetics,” and “the technosphere: man/machine symbiosis.” Outstanding works are analyzed in detail. Methods of production are meticulously described, including interviews with artists and technologists of the period, such as Nam June Paik, Jordan Belson, Andy Warhol, Stan Brakhage, Carolee Schneemann, Stan VanDerBeek, Les Levine, and Frank Gillette. An inspiring Introduction by the celebrated polymath and designer R. Buckminster Fuller—a perfectly cut gem of countercultural thinking in itself—places Youngblood’s radical observations in comprehensive perspective. Providing an unparalleled historical documentation, Expanded Cinema clarifies a chapter of countercultural history that is still not fully represented in the arthistorical record half a century later. The book will also inspire the current generation of artists working in ever-newer expansions of the cinematic environment and will prove invaluable to all who are concerned with the technologies that are reshaping the nature of human communication.

Download or read book Design and Equipment for Restaurants and Foodservice written by Chris Thomas and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text shows the reader how to plan and develop a restaurant or foodservice space. Topics covered include concept design, equipment identification and procurement, design principles, space allocation, electricity and energy management, environmental concerns, safety and sanitation, and considerations for purchasing small equipment, tableware, and table linens. This book is comprehensive in nature and focuses on the whole facility—with more attention to the equipment—rather than emphasizing either front of the house or back of the house.

Download or read book Occupational Literacy Education written by R. Timothy Rush and published by . This book was released on 1986 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for teachers of adult basic education as well as teachers in job retraining programs, this book focuses on the development of written and oral language competencies required in occupational and training settings. The first four chapters offer a concise synthesis of recent research on adult learning and on workplace literacy for ten occupations: account clerk, auto mechanic, draftsman, electrician, heating/air conditioning mechanic, industrial maintenance mechanic, licensed practical nurse, machine tool operator, secretary, and welder. The fifth chapter presents instructional strategies and techniques for the development of job related skills in these occupations, and the sixth chapter discusses methods and information for technical vocabulary development. The appendixes include lists of high frequency and technical words often used in the ten occupations. (HOD)

Download or read book Computational Photography written by Ramesh Raskar and published by A K Peters/CRC Press. This book was released on 2016-05-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Photography combines plentiful computing, digital sensors, modern optics, actuators, probes, and smart lights to escape the limitations of traditional film cameras and enables novel imaging applications. This book provides a practical guide to topics in image capture and manipulation methods for generating compelling pictures for graphics, special effects, scene comprehension, and art. The computational techniques discussed cover topics in exploiting new ideas in manipulating optics, illumination, and sensors at time of capture. In addition, the authors describe sophisticated reconstruction procedures from direct and indirect pixel measurements that go well beyond the traditional digital darkroom experience.

Download or read book Industrial Safety and Health Management written by C. Ray Asfahl and published by Prentice Hall. This book was released on 2010 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Safety And Health Management is ideal for senior/graduate-level courses in Industrial Safety, Industrial Engineering, Industrial Technology, and Operations Management. It isuseful f or industrial engineers.

Download or read book Handbook of Evaporation Technology written by Paul E. Minton and published by William Andrew. This book was released on 1988 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume combines a great deal of data only previously available from many different sources into a single, informative volume. It presents evaporation technology as it exists today. Although evaporation is one of the oldest unit operations, it is also an area with dramatic changes in the last quarter century. Although other methods of separation are available, evaporation remains the best process for many applications. All factors must be evaluated in order to select the best evaporator type. This book will be extremely useful in evaluating and deciding which evaporation technology will meet a particular set of requirements.

Download or read book Commercial Fruit Processing written by Jasper Woodroof and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: • use of fewer additives containing sodium, spices, artificial colors and flavors, and "energy" • continued use of fruits in cereals, salads, cakes, pies, and other com binations, as a source of minerals, vitamins, fiber, and natural flavors and colors An important recent innovation is low-moisture processing, in which fruit, with no added sugar, preservative, or carrier, is converted into convenient dehydrated forms. Development of this technology has been stimulated by high transportation rates, improvements in technology, and revolutionary new packages. In addition to raisins, prunes, and dehy drated apples, pears, peaches, and apricots, bananas are available in flakes, slices, and granules; pineapple and other tropical fruits also are available in new forms. Another low-moisture product is apple fiber sol ids, consisting of cell wall material (cellulose, hemicellulose, lignin, and pectin) and apple sugars. Low-moisture forms of other fruits are becom mg more common. Commercial Fruit Processing is a companion volume to Commercial Vegetable Processing, also edited by B. S. Luh and J. G. Woodroof; both are being updated and revised simultaneously. Grateful acknowledgments and thanks go to contributors who wrote in their own area of expertise on commercial fruit processing. Credit also goes to more than a dozen commercial companies and individuals who supplied photographs, charts, tables, and data from commercial opera tions. Thanks also to Ann Autry who typed, corrected, and edited the manu script; and to Naomi C. Woodroof, my wife, for assisting in research.

Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.

Download or read book Maintenance Engineering Handbook written by Keith Mobley and published by McGraw Hill Professional. This book was released on 2008-04-20 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

Download or read book Construction Waterproofing Handbook 2E PB written by Michael T. Kubal and published by McGraw Hill Professional. This book was released on 2008-03-26 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Latest Waterproofing Techniques and Technology Fully updated to include new techniques for mold remediation, Construction Waterproofing Handbook simplifies the critical task of keeping a building's envelope watertight. It begins with a tutorial on basic waterproofing concepts and materials, then moves on to the particulars of designing and installing systems in commercial, industrial, and residential structures. Written by a renowned expert and popular author on the subject, this comprehensive guide provides key information on such matters as quality assurance, admixtures, expansion joints, testing, and safety. Because of recent natural disasters, clients are more concerned with waterproofing than ever. Construction Waterproofing Handbook provides everything you'll need to complete the most demanding projects with confidence and within budget. Packed with hundreds of illustrations, Construction Waterproofing Handbook includes: Innovative mold remediation techniques New information about residential waterproofing Illustrations of installation procedures Detailed plans and specifications SI units Inside: • Waterproofing Principles • Below-Grade Waterproofing • Above-Grade Waterproofing • Residential Waterproofing • Sealants • Expansion Joints • Admixtures • Remedial Waterproofing • Mold • The Building Envelope • Life Cycles • Envelope Testing • Leak Investigation and Detection • Safety • Guide Specifications • Resources