Download or read book Verification and Validation of Real Time Software written by William J. Quirk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: W.J.Quirk 1.1 Real-time software and the real world Real-time software and the real world are inseparably related. Real time cannot be turned back and the real world will not always forget its history. The consequences of previous influences may last for a long time and the undesired effects may range from being inconvenient to disastrous in both economic and human terms. As a result, there is much pressure to develop and apply techniques to improve the reliability of real-time software so that the frequency and consequences of failure are reduced to a level that is as low as reasonably achievable. This report is about such techniques. After a detailed description of the software life cycle, a chapter is devoted to each of the four principle categories of technique available at present. These cover all stages of the software development process and each chapter identifies relevant techniques, the stages to which they are applicable and their effectiveness in improving real-time software reliability. 1.2 The characteristics of real-time software As well as the enhanced reliability requirement discussed above, real-time software has a number of other distinguishing characteristics. First, the sequencing and timing of inputs are determined by the real world and not by the programmer. Thus the program needs to be prepared for the unexpected and the demands made on the system may be conflicting. Second, the demands on the system may occur in parallel rather than in sequence.
Download or read book Verification Validation and Testing in Software Engineering written by Aristides Dasso and published by IGI Global. This book was released on 2007-01-01 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores different applications in V & V that spawn many areas of software development -including real time applications- where V & V techniques are required, providing in all cases examples of the applications"--Provided by publisher.
Download or read book Independent Verification and Validation written by Robert O. Lewis and published by John Wiley & Sons. This book was released on 1992-11-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and up-to-date, it covers the most vital part of software development, independent verification and validation. Presents a variety of methods that will ensure better quality, performance, cost and reliability of technical products and systems. Features numerous hints, tips and instructions for better interaction between verification and validation personnel, development engineers and managers. Includes 8 case histories ranging from major engineering systems through information systems. Many of the principles involved also apply to computer hardware as well as the fields of science and engineering.
Download or read book Formal Modeling and Verification of Cyber Physical Systems written by Rolf Drechsler and published by Springer. This book was released on 2015-06-05 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the lecture notes of the 1st Summer School on Methods and Tools for the Design of Digital Systems, 2015, held in Bremen, Germany. The topic of the summer school was devoted to modeling and verification of cyber-physical systems. This covers several aspects of the field, including hybrid systems and model checking, as well as applications in robotics and aerospace systems. The main chapters have been written by leading scientists, who present their field of research, each providing references to introductory material as well as latest scientific advances and future research directions. This is complemented by short papers submitted by the participating PhD students.
Download or read book An Assessment of Space Shuttle Flight Software Development Processes written by National Research Council and published by National Academies Press. This book was released on 1993-02-01 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective software is essential to the success and safety of the Space Shuttle, including its crew and its payloads. The on-board software continually monitors and controls critical systems throughout a Space Shuttle flight. At NASA's request, the committee convened to review the agency's flight software development processes and to recommend a number of ways those processes could be improved. This book, the result of the committee's study, evaluates the safety, oversight, and management functions that are implemented currently in the Space Shuttle program to ensure that the software is of the highest quality possible. Numerous recommendations are made regarding safety and management procedures, and a rationale is offered for continuing the Independent Verification and Validation effort that was instituted after the Challenger Accident.
Download or read book Software Verification and Validation written by Michael S. Deutsch and published by Prentice Hall. This book was released on 1982 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The main thrust of the book is to describe verification and validation approaches that have been used successfully on contemporary large—scale software projects” -- Preface.
Download or read book Engineering Real time Systems written by Rolv Bræk and published by . This book was released on 1993 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to help readers master the complexity of distributed real-time systems, this volume concentrates on the methodology involved--showing the step-by-step development of a common system example--from requirements through functional design and implementation design, to implementation, testing, and reuse.
Download or read book Leveraging Applications of Formal Methods Verification and Validation Discussion Dissemination Applications written by Tiziana Margaria and published by Springer. This book was released on 2016-10-04 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 9952 and LNCS 9953 constitutes the refereed proceedings of the 7th International Symposium on Leveraging Applications of Formal Methods, Verification and Validation, ISoLA 2016, held in Imperial, Corfu, Greece, in October 2016. The papers presented in this volume were carefully reviewed and selected for inclusion in the proceedings. Featuring a track introduction to each section, the papers are organized in topical sections named: statistical model checking; evaluation and reproducibility of program analysis and verification; ModSyn-PP: modular synthesis of programs and processes; semantic heterogeneity in the formal development of complex systems; static and runtime verification: competitors or friends?; rigorous engineering of collective adaptive systems; correctness-by-construction and post-hoc verification: friends or foes?; privacy and security issues in information systems; towards a unified view of modeling and programming; formal methods and safety certification: challenges in the railways domain; RVE: runtime verification and enforcement, the (industrial) application perspective; variability modeling for scalable software evolution; detecting and understanding software doping; learning systems: machine-learning in software products and learning-based analysis of software systems; testing the internet of things; doctoral symposium; industrial track; RERS challenge; and STRESS.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Quality Approaches Testing Verification and Validation written by Michael Haug and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: C. Amting Directorate General Information Society, European Commission, Brussels th Under the 4 Framework of European Research, the European Systems and Soft ware Initiative (ESSI) was part ofthe ESPRIT Programme. This initiative funded more than 470 projects in the area ofsoftware and system process improvements. The majority of these projects were process improvement experiments carrying out and taking up new development processes, methods and technology within the software development process ofa company. In addition, nodes (centres ofexper tise), European networks (organisations managing local activities), training and dissemination actions complemented the process improvementexperiments. ESSI aimed at improving the software development capabilities of European enterprises. It focused on best practice and helped European companies to develop world class skills and associated technologies to build the increasingly complex and varied systems needed to compete in the marketplace. The dissemination activities were designed to build a forum, at European level, to exchange information and knowledge gained within process improvement ex periments. Their major objective was to spread the message and the results of experiments to awider audience, through a variety ofdifferent channels. The European Experience Exchange ~UR~X) project has been one ofthese dis semination activities within the European Systems and Software Initiative.~UR~)( has collected the results of practitioner reports from numerous workshops in Europe and presents, in this series of books, the results of Best Practice achieve ments in European Companies over the last few years.
Download or read book Leveraging Applications of Formal Methods Verification and Validation written by Tiziana Margaria and published by Springer. This book was released on 2010-11-02 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the conference proceedings of the 4th International S- posium on Leveraging Applications of Formal Methods, Veri?cation and Vali- tion, ISoLA 2010, which was held in Greece (Heraklion, Crete) October 18–21, 2010, and sponsored by EASST. Following the tradition of its forerunners in 2004, 2006, and 2008 in Cyprus and Chalchidiki, and the ISoLA Workshops in Greenbelt (USA) in 2005, in Poitiers (France) in 2007, and in Potsdam (Germany) in 2009, ISoLA 2010 p- vided a forum for developers, users, and researchers to discuss issues related to the adoption and use of rigorous tools and methods for the speci?cation, ana- sis, veri?cation, certi?cation, construction, testing, and maintenance of systems from the point of view of their di?erent application domains. Thus, the ISoLA series of events serves the purpose of bridging the gap between designers and developers of rigorous tools, and users in engineering and in other disciplines, and to foster and exploit synergetic relationships among scientists, engineers, software developers, decision makers, and other critical thinkers in companies and organizations. In particular, by providing a venue for the discussion of c- mon problems, requirements, algorithms, methodologies, and practices, ISoLA aims at supporting researchers in their quest to improve the utility, reliability, ?exibility, and e?ciency of tools for building systems, and users in their search for adequate solutions to their problems.
Download or read book Embedded Software Verification and Debugging written by Djones Lettnin and published by Springer. This book was released on 2017-04-17 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of verification and debugging techniques for embedded software, which is frequently used in safety critical applications (e.g., automotive), where failures are unacceptable. Since the verification of complex systems needs to encompass the verification of both hardware and embedded software modules, this book focuses on verification and debugging approaches for embedded software with hardware dependencies. Coverage includes the entire flow of design, verification and debugging of embedded software and all key approaches to debugging, dynamic, static, and hybrid verification. This book discusses the current, industrial embedded software verification flow, as well as emerging trends with focus on formal and hybrid verification and debugging approaches.
Download or read book Verification Validation and Testing of Engineered Systems written by Avner Engel and published by John Wiley & Sons. This book was released on 2010-11-19 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems' Verification Validation and Testing (VVT) are carried out throughout systems' lifetimes. Notably, quality-cost expended on performing VVT activities and correcting system defects consumes about half of the overall engineering cost. Verification, Validation and Testing of Engineered Systems provides a comprehensive compendium of VVT activities and corresponding VVT methods for implementation throughout the entire lifecycle of an engineered system. In addition, the book strives to alleviate the fundamental testing conundrum, namely: What should be tested? How should one test? When should one test? And, when should one stop testing? In other words, how should one select a VVT strategy and how it be optimized? The book is organized in three parts: The first part provides introductory material about systems and VVT concepts. This part presents a comprehensive explanation of the role of VVT in the process of engineered systems (Chapter-1). The second part describes 40 systems' development VVT activities (Chapter-2) and 27 systems' post-development activities (Chapter-3). Corresponding to these activities, this part also describes 17 non-testing systems' VVT methods (Chapter-4) and 33 testing systems' methods (Chapter-5). The third part of the book describes ways to model systems’ quality cost, time and risk (Chapter-6), as well as ways to acquire quality data and optimize the VVT strategy in the face of funding, time and other resource limitations as well as different business objectives (Chapter-7). Finally, this part describes the methodology used to validate the quality model along with a case study describing a system’s quality improvements (Chapter-8). Fundamentally, this book is written with two categories of audience in mind. The first category is composed of VVT practitioners, including Systems, Test, Production and Maintenance engineers as well as first and second line managers. The second category is composed of students and faculties of Systems, Electrical, Aerospace, Mechanical and Industrial Engineering schools. This book may be fully covered in two to three graduate level semesters; although parts of the book may be covered in one semester. University instructors will most likely use the book to provide engineering students with knowledge about VVT, as well as to give students an introduction to formal modeling and optimization of VVT strategy.
Download or read book Selected Readings on Database Technologies and Applications written by Halpin, Terry and published by IGI Global. This book was released on 2008-08-31 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book offers research articles focused on key issues concerning the development, design, and analysis of databases"--Provided by publisher.
Download or read book Embedded and Real Time System Development A Software Engineering Perspective written by Mohammad Ayoub Khan and published by Springer. This book was released on 2013-11-19 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays embedded and real-time systems contain complex software. The complexity of embedded systems is increasing, and the amount and variety of software in the embedded products are growing. This creates a big challenge for embedded and real-time software development processes and there is a need to develop separate metrics and benchmarks. “Embedded and Real Time System Development: A Software Engineering Perspective: Concepts, Methods and Principles” presents practical as well as conceptual knowledge of the latest tools, techniques and methodologies of embedded software engineering and real-time systems. Each chapter includes an in-depth investigation regarding the actual or potential role of software engineering tools in the context of the embedded system and real-time system. The book presents state-of-the art and future perspectives with industry experts, researchers, and academicians sharing ideas and experiences including surrounding frontier technologies, breakthroughs, innovative solutions and applications. The book is organized into four parts “Embedded Software Development Process”, “Design Patterns and Development Methodology”, “Modelling Framework” and “Performance Analysis, Power Management and Deployment” with altogether 12 chapters. The book is aiming at (i) undergraduate students and postgraduate students conducting research in the areas of embedded software engineering and real-time systems; (ii) researchers at universities and other institutions working in these fields; and (iii) practitioners in the R&D departments of embedded system. It can be used as an advanced reference for a course taught at the postgraduate level in embedded software engineering and real-time systems.
Download or read book Database Technologies Concepts Methodologies Tools and Applications written by Erickson, John and published by IGI Global. This book was released on 2009-02-28 with total page 2962 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This reference expands the field of database technologies through four-volumes of in-depth, advanced research articles from nearly 300 of the world's leading professionals"--Provided by publisher.
Download or read book Software Applications Concepts Methodologies Tools and Applications written by Tiako, Pierre F. and published by IGI Global. This book was released on 2009-03-31 with total page 3994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes articles in topic areas such as autonomic computing, operating system architectures, and open source software technologies and applications.
