Download or read book Vehicle thermal Management Systems Conference and Exhibition VTMS10 written by IMechE and published by Elsevier. This book was released on 2011-05-05 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the IMechE and SAE International, Vehicle Thermal Management Systems Conference (VTMS10), held at the Heritage Motor Centre, Gaydon, Warwickshire, 15-19th May 2011. VTMS10 is an international conference organised by the Automobile Division and the Combustion Engines and Fuels Group of the IMechE and SAE International. The event is aimed at anyone involved with vehicle heat transfer, members of the OEM, tier one suppliers, component and software suppliers, consultants, and academics interested in all areas of thermal energy management in vehicles. This vibrant conference, the tenth VTMS, addresses the latest analytical and development tools and techniques, with sessions on: alternative powertrain, emissions, engines, heat exchange/manufacture, heating, A/C, comfort, underhood, and external/internal component flows. It covers the latest in research and technological advances in the field of heat transfer, energy management, comfort and the efficient management of all thermal systems within the vehicle. - Aimed at anyone working in or involved with vehicle heat transfer - Covers research and technological advances in heat transfer, energy management, comfort and efficient management of thermal systems within the vehicle

Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2021-10-16 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiative Heat Transfer, Fourth Edition is a fully updated, revised and practical reference on the basic physics and computational tools scientists and researchers use to solve problems in the broad field of radiative heat transfer. This book is acknowledged as the core reference in the field, providing models, methodologies and calculations essential to solving research problems. It is applicable to a variety of industries, including nuclear, solar and combustion energy, aerospace, chemical and materials processing, as well as environmental, biomedical and nanotechnology fields. Contemporary examples and problems surrounding sustainable energy, materials and process engineering are an essential addition to this edition. - Includes end-of-chapter problems and a solutions manual, providing a structured and coherent reference - Presents many worked examples which have been brought fully up-to-date to reflect the latest research - Details many computer codes, ranging from basic problem solving aids to sophisticated research tools

Download or read book Automotive Engineering International written by and published by . This book was released on 2007 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Wastes from Aluminum Smelter Plants written by B. Mazumder and published by WPI Publishing. This book was released on 2011-01-14 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the major environmental polluting waste materials from industries and particularly stresses upon decontaminating spent pot liner. The book incorporates the author’s direct experiences in handling this toxic waste and discusses his world patents and semi-commercial plant operation in decontaminating spent pot liner and recovering its carbon value.

Download or read book Braking 2009 written by Institution of Mechanical Engineers and published by Woodhead Publishing. This book was released on 2009-05-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers are arranged under the following headings: Materials; Braking systems design; Design and thermal effects; NVH.

Download or read book Principles of E Learning Systems Engineering written by Lester Gilbert and published by Chandos Publishing. This book was released on 2007-11-14 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating the principles of software engineering with the principles of educational theory, this book provides a coherent process for developing e-learning activities with adults.

Download or read book Low Carbon Vehicles 2009 written by Institution of Mechanical Engineers and published by Woodhead Publishing. This book was released on 2009-05-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers are arranged under the following headings: The carbon challenge; Electricity; Hybrids; Fuels and lubes; Alternative energy storage media; IC engines.

Download or read book Heat Transfer Phenomena and Applications written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2012-10-24 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer calculations in different aspects of engineering applications are essential to aid engineering design of heat exchanging equipment. Minimizing of computational time is a challenging task faced by researchers and users. Methodology of calculations in some application areas are incorporated in this book, such as differential analysis of heat recoveries with CFD in a tube bank, heating and ventilation of equipment and methods for analytical solution of nonlinear problems. Numerical analysis is the prerequisite of design and for the manufacture of heat exchanging equipment. Some numerical and experimental information are presented with utmost skill. Similarly, the analytical solution of heat transfer is touched in this book. Study of heat transfer phenomena and applications are equally emphasized in this issue.

Download or read book Natural Ventilation in the Urban Environment written by Francis Allard and published by Routledge. This book was released on 2012-06-25 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the world, there is an increasing interest in ecological design of buildings, and natural ventilation has proved to be the most efficient low-energy cooling technique. Its practical application, however, is hindered by the lack of information on the complex relationship between the building and its urban environment. In this book, a team of experts provide first-hand information and tools on the efficient use of natural ventilation in urban buildings. Key design principles are explained, enabling readers to decide on the best solution for natural ventilation of buildings, taking into account climate and urban context.In the initial sketches, architects need answers to open problems such as 'what kind of solution to adopt' and 'how to modify existing strategies to exploit the potential of the site'. This book formalizes the multi-criteria analysis of candidate solutions based on quantitative and qualitative estimation of the driving forces (wind and buoyancy), as well as of the barriers induced by the urban environment (wind speed reduction, noise and pollution) and gives a methodology for optimal design of openings. The book is accompanied by downloadable resources, containing software for assessing the potential of a given site, estimating wind speed and dimensioning the openings for natural ventilation. The methodologies and tools are tested, self-contained and user friendly.About the editorsThe editors, Cristian Ghiaus and Francis Allard, are affiliated with the University of La Rochelle, France. The authors and reviewers combine expertise from universities, research institutions and industry in Belgium, France, Great Britain, Greece, Portugal and Switzerland.

Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings

Download or read book Rubber Technology written by S.C. Bhatia and published by Woodhead Publishing India in Materials and Engineering. This book was released on 2019-01-30 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set summarises various aspects of natural, synthetic rubbers, vulcanisation mixing and calendering, manufacturing techniques of various rubber. It discusses: basic concepts of polymerisation, natural rubber, synthetic rubbers: an overview, styrene butadiene rubber, polybutadiene rubber, polyisoprene rubber, butyl and halobutyl rubber, ethylene propylene rubber, thermoplastic rubber (Elastomers), chloroprene rubber, chlorosulphonated polyethylene rubber, nitrile rubber, polyacrylic rubber, fluorocarbon rubber, silicone rubber, thermoplastic polyurethane, PEVA, chlorinated polyethylene and ethylene acrylic elastomers, polysulphide, norbornene and polyphosphazene rubbers, materials for compounding and reinforcement, mixing and curing of rubber compounds, calendering, extrusion and molding of rubber compounds. A unique features of the book is chapter on chemistry and technology of vulcanisation.

Download or read book Heat Transfer in Process Engineering written by Eduardo Cao and published by McGraw Hill Professional. This book was released on 2009-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge heat transfer principles and design applications Apply advanced heat transfer concepts to your chemical, petrochemical, and refining equipment designs using the detailed information contained in this comprehensive volume. Filled with valuable graphs, tables, and charts, Heat Transfer in Process Engineering covers the latest analytical and empirical methods for use with current industry software. Select heat transfer equipment, make better use of design software, calculate heat transfer coefficients, troubleshoot your heat transfer process, and comply with design and construction standards. Heat Transfer in Process Engineering allows you to: Review heat transfer principles with a direct focus on process equipment design Design, rate, and specify shell and tube, plate, and hairpin heat exchangers Design, rate, and specify air coolers with plain or finned tubes Design, rate, and specify different types of condensers with tube or shellside condensation for pure fluids or multicomponent mixtures Understand the principles and correlations of boiling heat transfer, with their limits on and applications to different types of reboiler design Apply correlations for fired heater ratings, for radiant and convective zones, and calculate fuel efficiency Obtain a set of useful Excel worksheets for process heat transfer calculations

Download or read book The Mechanobiology and Mechanophysiology of Military Related Injuries written by Amit Gefen and published by Springer. This book was released on 2016-03-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art update, as well as perspectives on future directions of research and clinical applications in the implementation of biomechanical and biophysical experimental, theoretical and computational models which are relevant to military medicine. Such experimental and modeling efforts are helpful, on the one hand, in understanding the aetiology, pathophysiology and dynamics of injury development and on the other hand in guiding the development of better equipment and protective gear or devices that should ultimately reduce the prevalence and incidence of injuries or lessen their hazardous effects. The book is useful for military-oriented biomedical engineers and medical physicists, as well as for military physiologists and other medical specialists who are interested in the science and technology implemented in modern investigations of military related injuries.

Download or read book Solar Energy written by Suhas P. Sukhatme and published by Tata McGraw-Hill Education. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ergonomics Evaluation of Thermal Strain by Physiological Measurements written by British Standards Institute Staff and published by . This book was released on 2004-02-26 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics, Thermal stress, Working conditions (physical), Physiological effects (human body), Temperature measurement, Human body, Skin (body), Heart, Urine, Sweat, Tolerances (human body), Human physiology, Medical inspection

Download or read book Never Mind the Web written by Miha Kovac and published by Elsevier. This book was released on 2008-09-30 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This key book examines the role of the printed book in contemporary societies, its demographics and its relation to the other media. It analyzes the differences among various national book industries throughout Europe and the USA, and the reasons and impact of the differences. Both the effect of digital technologies and the reasons why e-books did not substitute the printed book, as predicted in mid-nineties, are explored. - A comprehensive overview of the diversities and similarities that exist among various national book industries and among various publishing fields throughout the developed world - Analyses the development of all book professions (librarians + booksellers + publishers) - Builds a link between research methodologies used in book history and on contemporary publishing research

Download or read book Bibliographic Information Organization in the Semantic Web written by Mirna Willer and published by Elsevier. This book was released on 2013-10-31 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies will underpin the future generation of library catalogues. To facilitate their role providing information, serving users, and fulfilling their mission as cultural heritage and memory institutions, libraries must take a technological leap; their standards and services must be transformed to those of the Semantic Web. Bibliographic Information Organization in the Semantic Web explores the technologies that may power future library catalogues, and argues the necessity of such a leap. The text introduces international bibliographic standards and models, and fundamental concepts in their representation in the context of the Semantic Web. Subsequent chapters cover bibliographic information organization, linked open data, methodologies for publishing library metadata, discussion of the wider environment (museum, archival and publishing communities) and users, followed by a conclusion. - The product of over thirty years' experience and in-depth understanding of bibliographic metadata - Takes both a bottom up and top down approach: from basic standards and case studies to Semantic Web tools and services; and from abstract models and generic guidelines to applications - Tells an insiders' story of the experience developing tools for the transition of library systems, metadata, and its utility, into the new milieu