Download or read book Various and Ingenious Machines Volume Two Manufacturing and Weapons Technology written by Bryan Lawton and published by BRILL. This book was released on 2023-04-17 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work describes the pre-industrial history of mechanical engineering and covers power generation, transport, manufacturing, and weapons technology. Important items are discussed in each section and performance data are presented in easily understood graphical format using over 800 illustrations. The print edition is available as a set of two volumes (9789004136090).
Download or read book Ancient Building Technology Volume 2 Materials 2 vols written by Mick Wright and published by BRILL. This book was released on 2005-07-01 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This résumé study deals with building material, which together with construction and structures, forms one of the three aspects of building, or equally one of the three factors which constitute the nature of a building.
Download or read book Various and Ingenious Machines Volume One Power Generation and Transport written by Bryan Lawton and published by BRILL. This book was released on 2023-03-13 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work describes the pre-industrial history of mechanical engineering and covers power generation, transport, manufacturing, and weapons technology. Important items are discussed in each section and performance data are presented in easily understood graphical format using over 800 illustrations. The print edition is available as a set of two volumes (9789004136090).
Download or read book Wind Water Work written by Adam Lucas and published by BRILL. This book was released on 2006-01-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the most comprehensive empirical study to date of the social and technical aspects of milling during the ancient and medieval periods. Drawing on the latest archaeological evidence and historical studies, the book examines the chronological development and technical details of handmills, beast mills, watermills and windmills from the first millennium BCE to c. 1500. It discusses the many and varied uses to which mills were turned in the civilisations of Rome, China, Islam and Europe, and the many types of mill that existed. The book also includes comparative regional studies of the social and economic significance of milling, and tackles several important historiographical issues, such as whether technological stagnation was a characteristic of late Antiquity, whether there was an "industrial revolution" in the European Middle Ages based on waterpower, and how contemporary studies in the social shaping of technology can shed light on the study of pre-modern technology.
Download or read book Using the Engineering Literature written by Bonnie A. Osif and published by CRC Press. This book was released on 2006-08-23 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of engineering is becoming increasingly interdisciplinary, and there is an ever-growing need for engineers to investigate engineering and scientific resources outside their own area of expertise. However, studies have shown that quality information-finding skills often tend to be lacking in the engineering profession. Using the Engineerin
Download or read book Ancient Building Technology written by George R. H. Wright and published by . This book was released on 2000 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following resume study deals with building material, which together with construction and structures, forms one of the three aspects of building, or equally one of the three factors which constitute the nature of a building.
Download or read book Technology and Change in History written by G. R. H. Wright and published by . This book was released on 2005 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Early History of Mechanical Engineering written by Bryan Lawton and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Cloud Revolution written by Mark P. Mills and published by Encounter Books. This book was released on 2021-11-02 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conventional wisdom on how technology will change the future is wrong. Mark Mills lays out a radically different and optimistic vision for what’s really coming. The mainstream forecasts fall into three camps. One considers today as the “new normal,” where ordering a ride or food on a smartphone or trading in bitcoins is as good as it’s going to get. Another foresees a dystopian era of widespread, digitally driven job- and business-destruction. A third believes that the only technological revolution that matters will be found with renewable energy and electric cars. But according to Mills, a convergence of technologies will instead drive an economic boom over the coming decade, one that historians will characterize as the “Roaring 2020s.” It will come not from any single big invention, but from the confluence of radical advances in three primary technology domains: microprocessors, materials, and machines. Microprocessors are increasingly embedded in everything. Materials, from which everything is built, are emerging with novel, almost magical capabilities. And machines, which make and move all manner of stuff, are undergoing a complementary transformation. Accelerating and enabling all of this is the Cloud, history’s biggest infrastructure, which is itself based on the building blocks of next-generation microprocessors and artificial intelligence. We’ve seen this pattern before. The technological revolution that drove the great economic expansion of the twentieth century can be traced to a similar confluence, one that was first visible in the 1920s: a new information infrastructure (telephony), new machines (cars and power plants), and new materials (plastics and pharmaceuticals). Single inventions don’t drive great, long-cycle booms. It always takes convergent revolutions in technology’s three core spheres—information, materials, and machines. Over history, that’s only happened a few times. We have wrung much magic from the technologies that fueled the last long boom. But the great convergence now underway will ignite the 2020s. And this time, unlike any previous historical epoch, we have the Cloud amplifying everything. The next long boom starts now.
Download or read book The Various and Ingenious Machines of Agostino Ramelli written by Agostino Ramelli and published by . This book was released on 1987 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Various and Ingenious Machines of Agostino Ramelli 1588 written by Agostino Ramelli and published by . This book was released on 1976 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Choice written by and published by . This book was released on 2005 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The various and ingenious machines of Agostino Ramelli written by Agostino Ramelli and published by . This book was released on 1976 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The New Walford Guide to Reference Resources written by Ray Lester and published by . This book was released on 2005 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: The New Walford highlights the best resources to use when undertaking a search for accurate and relevant information, saving you precious time and effort. For those looking for a selective and evaluative reference resource that really delivers on its promise, look no further. In addition to print sources, The New Walford naturally covers an extensive range of e-reference sources such as digital databanks, digital reference services, electronic journal collections, meta-search engines, networked information services, open archives, resource discovery services and websites of premier organizations in both the public and private sectors. But rather than supplying a list of all available known resources as a web search engine might, The New Walford subject specialists have carefully selected and evaluated available resources to provide a definitive list of the most appropriate and useful. With an emphasis on quality and sustainability, the subject specialists have been careful to assess the differing ways that information is framed and communicated in different subject areas. As a result the resource evaluations in each subject area are prefaced by an introductory overview of the structure of the relevant literature. This ensures that The New Walford is clear, easy-to-use and intuitive. - Publisher.
Download or read book From the American System to Mass Production 1800 1932 written by David Hounshell and published by JHU Press. This book was released on 1984 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Houndshell's widely acclaimed history explores the American "genius for mass production" and races its origins in the nineteenth-century "American system" of manufacture. Previous writers on the American system have argued that the technical problems of mass production had been solved by armsmakers before the Civil War. Drawing upon the extensive business and manufacturing records if leading American firms, Hounshell demonstrates that the diffusion of arms production technology was neither as fast now as smooth as had been assumed. Exploring the manufacture of sewing machines and furniture, bicycles and reapers, he shows that both the expression "mass production" and the technology that lay behind it were developments of the twentieth century, attributable in large part to the Ford Motor Company. Hounshell examines the importance of individuals in the diffusion and development of production technology and the central place of marketing strategy in the success of selected American manufacturers. Whereaas Ford was the seedbed of the assembly line revolution, it was General motors that initiated a new era with its introduction of the annual model change. With the new marketing strategy, the technology of "the changeover" became of paramount importance. Hounshell chronicles how painfully Ford learned this lesson and recounts how the successful mass production of automobiles led to the establishment of an "ethos of mass production," to an era in which propoments of "Fordism" argued that mass production would solve all of America's social problems.
Download or read book Army Navy Air Force Register and Defense Times written by and published by . This book was released on 1918 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Brief Illustrated History of Machines and Mechanisms written by Emilio Bautista Paz and published by Springer Science & Business Media. This book was released on 2010-08-02 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines have always gone hand-in-hand with the cultural development of m- kind throughout time. A book on the history of machines is nothing more than a specific way of bringing light to human events as a whole in order to highlight some significant milestones in the progress of knowledge by a complementary persp- tive into a general historical overview. This book is the result of common efforts and interests by several scholars, teachers, and students on subjects that are connected with the theory of machines and mechanisms. In fact, in this book there is a certain teaching aim in addition to a general historical view that is more addressed to the achievements by “homo faber” than to those by “homo sapiens”, since the proposed history survey has been developed with an engineering approach. The brevity of the text added to the fact that the authors are probably not com- tent to tackle historical studies with the necessary rigor, means the content of the book is inevitably incomplete, but it nevertheless attempts to fulfil three basic aims: First, it is hoped that this book may provide a stimulus to promote interest in the study of technical history within a mechanical engineering context. Few are the co- tries where anything significant is done in this area, which means there is a general lack of knowledge of this common cultural heritage.
