Download or read book Organometallic Vapor Phase Epitaxy written by Gerald B. Stringfellow and published by Elsevier. This book was released on 1999-03-04 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organometallic Vapor-Phase Epitaxy describes the operation of a particular technique for the production of compound semiconductor materials. It describes how the technique works, how it can be used for the growth of particular materials and structures, and the application of these materials for specific devices. It contains not only a fundamental description of the operation of the technique but also contains lists of data useful for the everyday operation of OMVPE reactors. It also offers specific recipes that can be used to produce a wide range of specific materials, structures, and devices. - Updated with new emphasis on the semiconducting nitride materials—GaN and its alloys with In and Al - Emphasizes the newly understood aspects of surface processes - Contains a new chapter, as well as several new sections in chapters on thermodynamics and kinetics
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book Two step MOVPE in situ etching and buried implantation applications to the realization of GaAs laser diodes written by Pietro della Casa and published by Cuvillier Verlag. This book was released on 2021-03-25 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is about two-step epitaxial growth using metalorganic vapor-phase epitaxy (MOVPE) for the realization of edge-emitting near-infrared laser diodes. The fabricated gallium arsenide-based devices fall into two categories: high-power lasers (watt range, multimodal) and tunable lasers (milliwatt range, monomodal). Common to both cases is that surface contamination – particularly that due to oxygen – needs to be removed before regrowth. Thus, in-situ etching with carbon tetrabromide (CBr4) is first studied. The experimental results include kinetic data, the effects of different etching conditions as well as substrate characteristics, and the effectiveness in reducing surface contamination. These investigations pave the way to devices based on 2-step epitaxy combined with in-situ etching. Correspondingly, thermally-tuned SG-DBR lasers operating around 975 nm have been successfully realized, obtaining a tuning range of 21 nm. In addition, the possibility of using electronic tuning in similar devices has been explored. High-power broad-area lasers have also been realized, using two-step epitaxy combined with ex-situ and in-situ etching, to create a buried, shallow “mesa” containing the active zone. This approach allows introducing lateral electrical and optical confinement, and – simultaneously – non-absorbing mirrors at the laser facets. Additionally, a different strategy to create a buried current aperture is presented, which is based on ion implantation followed by epitaxial regrowth. This enables to improve device performance and simultaneously introduce non-absorbing mirrors at the facets with correspondingly increased reliability.
Download or read book Proceedings of the Seventh International Conference on Chemical Vapor Deposition 1979 written by Thomas O. Sedgwick and published by . This book was released on 1979 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organometallic Vapor Phase Epitaxy written by Gerald B. Stringfellow and published by Elsevier. This book was released on 2012-12-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is one of the first single-author treatments of organometallic vapor-phase epitaxy (OMVPE)--a leading technique for the fabrication of semiconductor materials and devices. Also included are metal-organic molecular-beam epitaxy (MOMBE) and chemical-beam epitaxy (CBE) ultra-high-vacuum deposition techniques using organometallic source molecules. Of interest to researchers, students, and people in the semiconductor industry, this book provides a basic foundation for understanding the technique and the application of OMVPE for the growth of both III-V and II-VI semiconductor materials and the special structures required for device applications. In addition, a comprehensive summary detailing the OMVPE results observed to date in a wide range of III-V and II-VI semiconductors is provided. This includes a comparison of results obtained through the use of other epitaxial techniques such as molecular beam epitaxy (MBE), liquid-phase epitaxy (LPE), and vapor phase epitaxy using halide transport.
Download or read book Vapour Growth and Epitaxy written by G.W. Cullen and published by Elsevier. This book was released on 2013-09-03 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor Growth and Epitaxy covers the proceedings of the Third International Conference on Vapor Growth and Epitaxy, held in Amsterdam, The Netherlands on August 18-21, 1975. This conference highlights the crystal growth aspects of the preparation, characterization, and perfection of thin films of electronic interest. This book is organized into two sections encompassing 54 chapters. The first section considers the fundamental and applied crystal growth studies of silicon, III-V and II-VI compounds, and magnetic garnets. This section also describes the structure of autoepitaxial diamond films and the morphology of single crystals grown from the vapor phase. The second section deals with nucleation and crystal growth kinetic studies of whiskers and the fabrication of solar cells. This section further surveys the equilibrium, kinetics, and epitaxy in the chemical vapor deposition of silicon compounds.
Download or read book Encyclopedia of Optical Engineering Pho Z pages 2049 3050 written by Ronald G. Driggers and published by CRC Press. This book was released on 2003 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by 330 of the most widely respected names in the electro-optical sciences, the Encyclopedia is destined to serve as the premiere guide in the field with nearly 2000 figures, 560 photographs, 260 tables, and 3800 equations. From astronomy to x-ray optics, this reference contains more than 230 vivid entries examining the most intriguing technological advances and perspectives from distinguished professionals around the globe. The contributors have selected topics of utmost importance in areas including digital image enhancement, biological modeling, biomedical spectroscopy, and ocean optics, providing thorough coverage of recent applications in this continually expanding field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry for Electronic Materials written by K.F. Jensen and published by Elsevier. This book was released on 1993-03-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical aspects of materials processing used for electronic applications, e.g. Si, III-V compounds, superconductors, metallization materials, are covered in this volume. Significant recent advances have occurred in the development of new volatile precursors for the fabrication of III-V semiconductor and metal [Cu, W] films by OMCVD. Some fundamentally new and wide-ranging applications have been introduced in recent times. Experimental and modeling studies regarding deposition kinetics, operating conditions and transport as well as properties of films produced by PVD, CVD and PECVD are discussed. The thirty papers in this volume report on many other significant topics also. Research workers involved in these aspects of materials technology may find here some new perspectives with which to augment their projects.
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guided Wave Optoelectronics written by Theodor Tamir and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first guided-wave components that employed signals in the form of light beams traveling along thin films were fabricated a little more than two decades ago. The parallel development of semiconductor lasers and the subsequent availability of low-loss optical fibers made possible the imple mentation of completely optical systems for communications, signal pro cessing and other applications that had used only electronic circuitry in the past. Referred to as integrated optics, this technology has been rein forced by utilizing electronic components that act as controlling elements or perform other functions for which the optical counterparts are not as effec tive. The broader area thus generated was aptly named optoelectronics and it currently represents a fascinating, rapidly evolving and most promising technology. Specifically, the amalgamation of electronic and optics compo nents into an integrated optoelectronics format is expected to provide a wide range of systems having miniaturized, high speed, broad band and reliable components for telecommunications, data processing, optical computing and other applications in the near and far future. This book is intended to cover primarily the optical portion of the op toelectronics area by focusing on the theory and applications of components that use guided optical waves. Hence all aspects of integrated optics are dis cussed, but optoelectronic components having primarily electronic rather than optical functions have not been included. Each chapter has been writ ten by experts who have actively participated in developing the specific areas addressed by them.
Download or read book Proceedings of the Symposium on Materials and New Processing Technologies for Photovoltaics written by and published by . This book was released on 1981 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Materials written by L.S. Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic materials are a dominant factor in many areas of modern technology. The need to understand'them is paramount; this book addresses that need. The main aim of this volume is to provide a broad unified view of electronic materials, including key aspects of their science and technology and also, in many cases, their commercial implications. It was considered important that much of the contents of such an overview should be intelligible by a broad audience of graduates and industrial scientists, and relevant to advanced undergraduate studies. It should also be up to date and even looking forward to the future. Although more extensive, and written specifically as a text, the resulting book has much in common with a short course of the same name given at Coventry Polytechnic. The interpretation of the term "electronic materials" used in this volume is a very broad one, in line with the initial aim. The principal restriction is that, with one or two minor exceptions relating to aspects of device processing, for example, the materials dealt with are all active materials. Materials such as simple insulators or simple conductors, playing only a passive role, are not singled out for consider ation. Active materials might be defined as those involved in the processing of signals in a way that depends crucially on some specific property of those materials, and the immediate question then concerns the types of signals that might be considered.
Download or read book Vertical Cavity Surface Emitting Lasers written by Carl W. Wilmsen and published by Cambridge University Press. This book was released on 2001-11-12 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 1999, provides a comprehensive description of the physics, design, fabrication, characterization, and applications of vertical-cavity surface-emitting lasers.
Download or read book Low Dimensional Structures Prepared by Epitaxial Growth or Regrowth on Patterned Substrates written by K. Eberl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Ringberg in Rottach Egern, Germany, February 20--24, 1995
Download or read book Optical Spectroscopy of Semiconductor Nanostructures written by Eougenious L. Ivchenko and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume looks at optical spectroscopy of semiconductir nanostructures. Some of the topics it covers include: kingdom of nanostructures; quantum confinement in low-dimensional systems; resonant light reflection; and transmission and absorption.
Download or read book Integrated Optics written by T. Tamir and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt:
