Download or read book Masters Theses in the Pure and Applied Sciences written by Wade Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 26 (thesis year 1981) a total of 11 ,048 theses titles from 24 Canadian and 21 8 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 26 reports theses submitted in 1981, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Bulletin of Chemical Thermodynamics written by and published by . This book was released on 1987 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pandex Current Index to Scientific and Technical Literature written by and published by . This book was released on 1970 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Papers on Mechanical and Physical Subjects written by Osborne Reynolds and published by . This book was released on 1900 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering at Supercritical Fluid Conditions written by Michael E. Paulaitis and published by Butterworth-Heinemann. This book was released on 1983 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis Synthesis and Design of Chemical Processes written by Richard Turton and published by Pearson Education. This book was released on 2008-12-24 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Leading Integrated Chemical Process Design Guide: Now with New Problems, New Projects, and More More than ever, effective design is the focal point of sound chemical engineering. Analysis, Synthesis, and Design of Chemical Processes, Third Edition, presents design as a creative process that integrates both the big picture and the small details–and knows which to stress when, and why. Realistic from start to finish, this book moves readers beyond classroom exercises into open-ended, real-world process problem solving. The authors introduce integrated techniques for every facet of the discipline, from finance to operations, new plant design to existing process optimization. This fully updated Third Edition presents entirely new problems at the end of every chapter. It also adds extensive coverage of batch process design, including realistic examples of equipment sizing for batch sequencing; batch scheduling for multi-product plants; improving production via intermediate storage and parallel equipment; and new optimization techniques specifically for batch processes. Coverage includes Conceptualizing and analyzing chemical processes: flow diagrams, tracing, process conditions, and more Chemical process economics: analyzing capital and manufacturing costs, and predicting or assessing profitability Synthesizing and optimizing chemical processing: experience-based principles, BFD/PFD, simulations, and more Analyzing process performance via I/O models, performance curves, and other tools Process troubleshooting and “debottlenecking” Chemical engineering design and society: ethics, professionalism, health, safety, and new “green engineering” techniques Participating successfully in chemical engineering design teams Analysis, Synthesis, and Design of Chemical Processes, Third Edition, draws on nearly 35 years of innovative chemical engineering instruction at West Virginia University. It includes suggested curricula for both single-semester and year-long design courses; case studies and design projects with practical applications; and appendixes with current equipment cost data and preliminary design information for eleven chemical processes–including seven brand new to this edition.

Download or read book Energetics of Stable Molecules and Reactive Intermediates written by M.E. Minas da Piedade and published by Springer. This book was released on 1999-05-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the major experimental and theoretical methods currently used to study the energetics of stable molecules and reactive intermediates. Reviews the ate of the art and shows the interplay of experimental and theoretical methods used to probe bonding energetics and reactivity and a wide range of chemical species. A modern and invaluable introduction to the study of molecular energetics. A reference for workers currently involved in the field.

Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry

Download or read book Inventing Reactions written by Lukas J. Gooßen and published by Springer. This book was released on 2012-10-30 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Barry Trost: Transition metal catalyzed allylic alkylation.- Jeffrey W. Bode: Reinventing Amide Bond Formation.- Naoto Chatani and Mamoru Tobisu: Catalytic Transformations Involving the Cleavage of C-OMe Bonds.- Gregory L. Beutner and Scott E. Denmark: The Interplay of Invention, Observation and Discovery in the Development of Lewis Base Activation of Lewis Acids for Catalytic Enantioselective Synthesis.- David R. Stuart and Keith Fagnou: The Discovery and Development of a Palladium(II)-Catalyzed Oxidative Cross-Coupling of Two Unactivated Arenes.- Lukas Gooßen and Käthe Gooßen: Decarboxylative Cross-Coupling Reactions.- A. Stephen K. Hashmi: Gold-Catalyzed Organic Reactions.- Ben List: Developing Catalytic Asymmetric Acetalizations.- Steven M. Bischof, Brian G. Hashiguchi, Michael M. Konnick, and Roy A. Periana: The De NovoDesign of CH Bond Hydroxylation Catalysts.- Benoit Cardinal-David, Karl A. Scheidt: Carbene Catalysis: Beyond the Benzoin and Stetter Reactions.- Kenso Soai and Tsuneomi Kawasaki: Asymmetric autocatalysis of pyrimidyl alkanol.- Douglas C. Behenna and Brian M. Stoltz: Natural Products as Inspiration for Reaction Development: Catalytic Enantioselective Decarboxylative Reactions of Prochiral Enolate Equivalents. Hisashi Yamamoto: Acid Catalysis in Organic Synthesis.

Download or read book Advanced Distillation Technologies written by Anton A. Kiss and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation has historically been the main method for separating mixtures in the chemical process industry. However, despite the flexibility and widespread use of distillation processes, they still remain extremely energy inefficient. Increased optimization and novel distillation concepts can deliver substantial benefits, not just in terms of significantly lower energy use, but also in reducing capital investment and improving eco-efficiency. While likely to remain the separation technology of choice for the next few decades, there is no doubt that distillation technologies need to make radical changes in order to meet the demands of the energy-conscious society. Advanced Distillation Technologies: Design, Control and Applications gives a deep and broad insight into integrated separations using non-conventional arrangements, including both current and upcoming process intensification technologies. It includes: Key concepts in distillation technology Principles of design, control, sizing and economics of distillation Dividing-wall column (DWC) – design, configurations, optimal operation and energy efficient and advanced control DWC applications in ternary separations, azeotropic, extractive and reactive distillation Heat integrated distillation column (HIDiC) – design, equipment and configurations Heat-pump assisted applications (MVR, TVR, AHP, CHRP, TAHP and others) Cyclic distillation technology – concepts, modeling approach, design and control issues Reactive distillation – fundamentals, equipment, applications, feasibility scheme Results of rigorous simulations in Mathworks Matlab & Simulink, Aspen Plus, Dynamics and Custom Modeler Containing abundant examples and industrial case studies, this is a unique resource that tackles the most advanced distillation technologies – all the way from the conceptual design to practical implementation. The author of Advanced Distillation Technologies, Dr. Ir. Anton A. Kiss, has been awarded the Hoogewerff Jongerenprijs 2013. Find out more (website in Dutch)...

Download or read book Specific Heat Enthalpy and Entropy of Uranyl Fluoride written by Paul F. Wacker and published by . This book was released on 1947 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the National Bureau of Standards 1966 1967 written by United States. National Bureau of Standards and published by . This book was released on 1969 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Biorefineries written by Keith W. Waldron and published by Elsevier. This book was released on 2014-04-28 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biorefineries are an essential technology in converting biomass into biofuels or other useful materials. Advances in Biorefineries provides a comprehensive overview of biorefining processing techniques and technologies, and the biofuels and other materials produced. Part one focuses on methods of optimizing the biorefining process and assessing its environmental and economic impact. It also looks at current and developing technologies for producing value-added materials. Part two goes on to explore these materials with a focus on biofuels and other value-added products. It considers the properties, limitations, and practical applications of these products and how they can be used to meet the increasing demand for renewable and sustainable fuels as an alternative to fossil fuels. Advances in Biorefineries is a vital reference for biorefinery/process engineers, industrial biochemists/chemists, biomass/waste scientists and researchers and academics in the field. - A comprehensive and systematic reference on the advanced biomass recovery and conversion processes used in biorefineries - Reviews developments in biorefining processes - Discusses the wide range of value-added products from biorefineries, from biofuel to biolubricants and bioadhesives

Download or read book Technical News Bulletin written by and published by . This book was released on 1967 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dense Phase Carbon Dioxide written by Murat O. Balaban and published by John Wiley & Sons. This book was released on 2012-04-05 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dense phase carbon dioxide (DPCD) is a non-thermal method for food and pharmaceutical processing that can ensure safe products with minimal nutrient loss and better preserved quality attributes. Its application is quite different than, for example, supercritical extraction with CO 2 where the typical solubility of materials in CO 2 is in the order of 1% and therefore requires large volumes of CO 2. In contrast, processing with DPCD requires much less CO 2 (between 5 to 8% CO 2 by weight) and the pressures used are at least one order of magnitude less than those typically used in ultra high pressure (UHP) processing. There is no noticeable temperature increase due to pressurization, and typical process temperatures are around 40°C. DPCD temporarily reduces the pH of liquid foods and because oxygen is removed from the environment, and because the temperature is not high during the short process time (typically about five minutes in continuous systems), nutrients, antioxidant activity, and vitamins are much better preserved than with thermal treatments. In pharmaceutical applications, DPCD facilitates the production of micronized powders of controlled particle size and distribution. Although the capital and operating costs are higher than that of thermal treatments, they are much lower than other non-thermal technology operations. This book is the first to bring together the significant amount of research into DPCD and highlight its effectiveness against microorganisms and enzymes as well as its potential in particle engineering. It is directed at food and pharmaceutical industry scientists and technologists working with DPCD and other traditional or non-thermal technologies that can potentially be used in conjunction with DPCD. It will also be of interest to packaging specialists and regulatory agencies.

Download or read book Thermophysical Properties of Chemicals and Hydrocarbons written by Carl L. Yaws and published by William Andrew. This book was released on 2014-06-20 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by an expert in the field, the book provides an engineer with data they can trust. Spanning gases, liquids, and solids, all critical properties (including viscosity, thermal conductivity, and diffusion coefficient) are covered. From C1 to C100 organics and Ac to Zr inorganics, the data in this handbook is a perfect quick reference for field, lab or classroom usage. By collecting a large – but relevant – amount of information in one source, the handbook enables engineers to spend more time developing new designs and processes, and less time collecting vital properties data. This is not a theoretical treatise, but an aid to the practicing engineer in the field, on day-to-day operations and long range projects. - Simplifies research and significantly reduces the amount of time spent collecting properties data - Compiled by an expert in the field, the book provides an engineer with data they can trust in design, research, development and manufacturing - A single, easy reference for critical temperature dependent properties for a wide range of hydrocarbons, including C1 to ClOO organics and Ac to Zr inorganics

Download or read book Principles of Chemical Engineering Practice written by George DeLancey and published by John Wiley & Sons. This book was released on 2013-05-22 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables chemical engineering students to bridge theory and practice Integrating scientific principles with practical engineering experience, this text enables readers to master the fundamentals of chemical processing and apply their knowledge of such topics as material and energy balances, transport phenomena, reactor design, and separations across a broad range of chemical industries. The author skillfully guides readers step by step through the execution of both chemical process analysis and equipment design. Principles of Chemical Engineering Practice is divided into two sections: the Macroscopic View and the Microscopic View. The Macroscopic View examines equipment design and behavior from the vantage point of inlet and outlet conditions. The Microscopic View is focused on the equipment interior resulting from conditions prevailing at the equipment boundaries. As readers progress through the text, they'll learn to master such chemical engineering operations and equipment as: Separators to divide a mixture into parts with desirable concentrations Reactors to produce chemicals with needed properties Pressure changers to create favorable equilibrium and rate conditions Temperature changers and heat exchangers to regulate and change the temperature of process streams Throughout the book, the author sets forth examples that refer to a detailed simulation of a process for the manufacture of acrylic acid that provides a unifying thread for equipment sizing in context. The manufacture of hexyl glucoside provides a thread for process design and synthesis. Presenting basic thermodynamics, Principles of Chemical Engineering Practice enables students in chemical engineering and related disciplines to master and apply the fundamentals and to proceed to more advanced studies in chemical engineering.