Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers

Download or read book Analysis Synthesis and Design of Chemical Processes written by Richard Turton and published by Pearson Education. This book was released on 2008-12-24 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Leading Integrated Chemical Process Design Guide: Now with New Problems, New Projects, and More More than ever, effective design is the focal point of sound chemical engineering. Analysis, Synthesis, and Design of Chemical Processes, Third Edition, presents design as a creative process that integrates both the big picture and the small details–and knows which to stress when, and why. Realistic from start to finish, this book moves readers beyond classroom exercises into open-ended, real-world process problem solving. The authors introduce integrated techniques for every facet of the discipline, from finance to operations, new plant design to existing process optimization. This fully updated Third Edition presents entirely new problems at the end of every chapter. It also adds extensive coverage of batch process design, including realistic examples of equipment sizing for batch sequencing; batch scheduling for multi-product plants; improving production via intermediate storage and parallel equipment; and new optimization techniques specifically for batch processes. Coverage includes Conceptualizing and analyzing chemical processes: flow diagrams, tracing, process conditions, and more Chemical process economics: analyzing capital and manufacturing costs, and predicting or assessing profitability Synthesizing and optimizing chemical processing: experience-based principles, BFD/PFD, simulations, and more Analyzing process performance via I/O models, performance curves, and other tools Process troubleshooting and “debottlenecking” Chemical engineering design and society: ethics, professionalism, health, safety, and new “green engineering” techniques Participating successfully in chemical engineering design teams Analysis, Synthesis, and Design of Chemical Processes, Third Edition, draws on nearly 35 years of innovative chemical engineering instruction at West Virginia University. It includes suggested curricula for both single-semester and year-long design courses; case studies and design projects with practical applications; and appendixes with current equipment cost data and preliminary design information for eleven chemical processes–including seven brand new to this edition.

Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.

Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. - Explores key CO2 separation and compare technologies in terms of provable advantages and limitations - Analyzes all critical CO2 capture methods in tandem with related technologies - Introduces a panorama of various applications of CO2 capture

Download or read book Solubility data series written by A. S. Kertes and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CO2 Conversion and Utilization written by Chunshan Song and published by ACS Symposium. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry and processes for conversion and utilization of carbon dioxide. Topics include CO 2 utilization, its conversion to industrial chemicals and fuels, its coversion via synthesis gas, and new catalysts and chemical processes for conversion.

Download or read book Green Extraction of Natural Products written by Farid Chemat and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extraction processes are essential steps in numerous industrial applications from perfume over pharmaceutical to fine chemical industry. Nowadays, there are three key aspects in industrial extraction processes: economy and quality, as well as environmental considerations. This book presents a complete picture of current knowledge on green extraction in terms of innovative processes, original methods, alternative solvents and safe products, and provides the necessary theoretical background as well as industrial application examples and environmental impacts. Each chapter is written by experts in the field and the strong focus on green chemistry throughout the book makes this book a unique reference source. This book is intended to be a first step towards a future cooperation in a new extraction of natural products, built to improve both fundamental and green parameters of the techniques and to increase the amount of extracts obtained from renewable resources with a minimum consumption of energy and solvents, and the maximum safety for operators and the environment.

Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu

Download or read book Transport Phenomena and Unit Operations written by Richard G. Griskey and published by John Wiley & Sons. This book was released on 2005-01-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of transport phenomena has long been thoroughly and expertly addressed on the graduate and theoretical levels. Now Transport Phenomena and Unit Operations: A Combined Approach endeavors not only to introduce the fundamentals of the discipline to a broader, undergraduate-level audience but also to apply itself to the concerns of practicing engineers as they design, analyze, and construct industrial equipment. Richard Griskey's innovative text combines the often separated but intimately related disciplines of transport phenomena and unit operations into one cohesive treatment. While the latter was an academic precursor to the former, undergraduate students are often exposed to one at the expense of the other. Transport Phenomena and Unit Operations bridges the gap between theory and practice, with a focus on advancing the concept of the engineer as practitioner. Chapters in this comprehensive volume include: Transport Processes and Coefficients Frictional Flow in Conduits Free and Forced Convective Heat Transfer Heat Exchangers Mass Transfer; Molecular Diffusion Equilibrium Staged Operations Mechanical Separations Each chapter contains a set of comprehensive problem sets with real-world quantitative data, affording students the opportunity to test their knowledge in practical situations. Transport Phenomena and Unit Operations is an ideal text for undergraduate engineering students as well as for engineering professionals.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Thermodynamic Models written by Michael L. Michelsen and published by . This book was released on 2007 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CO2 Hydrogenation Catalysis written by Yuichiro Himeda and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the effective catalysts and latest advances in CO2 conversion in chemicals and fuels Carbon dioxide hydrogenation is one of the most promising and economic techniques to utilize CO2 emissions to produce value-added chemicals. With contributions from an international team of experts on the topic, CO2 Hydrogenation Catalysis offers a comprehensive review of the most recent developments in the catalytic hydrogenation of carbon dioxide to formic acid/formate, methanol, methane, and C2+ products. The book explores the electroreduction of carbon dioxide and contains an overview on hydrogen production from formic acid and methanol. With a practical review of the advances and challenges in future CO2 hydrogenation research, the book provides an important guide for researchers in academia and industry working in the field of catalysis, organometallic chemistry, green and sustainable chemistry, as well as energy conversion and storage. This important book: Offers a unique review of effective catalysts and the latest advances in CO2 conversion Explores how to utilize CO2 emissions to produce value-added chemicals and fuels such as methanol, olefins, gasoline, aromatics Includes the latest research in homogeneous and heterogeneous catalysis as well as electrocatalysis Highlights advances and challenges for future investigation Written for chemists, catalytic chemists, electrochemists, chemists in industry, and chemical engineers, CO2 Hydrogenation Catalysis offers a comprehensive resource to understanding how CO2 emissions can create value-added chemicals.

Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.

Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by Intechopen. This book was released on 2019 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional heavy crude oils are replacing the conventional light crude oils slowly but steadily as a major energy source. Heavy crude oils are cheaper and present an opportunity to the refiners to process them with higher profit margins. However, the unfavourable characteristics of heavy crude oils such as high viscosity, low API gravity, low H/C ratio, chemical complexity with high asphaltenes content, high acidity, high sulfur and increased level of metal and heteroatom impurities impede extraction, pumping, transportation and processing. Very poor mobility of the heavy oils, due to very high viscosities, significantly affects production and transportation. Techniques for viscosity reduction, drag reduction and in-situ upgrading of the crude oil to improve the flow characteristics in pipelines are presented in this book. The heavier and complex molecules of asphaltenes with low H/C ratios present many technological challenges during the refining of the crude oil, such as heavy coking on catalysts. Hydrogen addition and carbon removal are the two approaches used to improve the recovery of value-added products such as gasoline and diesel. In addition, the heavy crude oil needs pre-treatment to remove the high levels of impurities before the crude oil can be refined. This book introduces the major challenges and some of the methods to overcome them.

Download or read book Distillation Design and Control Using Aspen Simulation written by William L. Luyben and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely treatment of distillationcombining steady-state designand dynamic controllability As the world continues to seek new sources of energy, the distillation process remains one of the most important separation methods in the chemical, petroleum, and energy industries. And as new renewable sources of energy and chemical feedstocks become more universally utilized, the issues of distillation design and control will remain vital to a future sustainable lifestyle. Distillation Design and Control Using Aspen Simulation introduces the current status and future implications of this vital technology from the dual perspectives of steady-state design and dynamics. Where traditional design texts have focused mainly on the steady-state economic aspects of distillation design, William Luyben also addresses such issues as dynamic performance in the face of disturbances. Utilizing the commercial simulators Aspen Plus and Aspen Dynamics, the text guides future and practicing chemical engineers first in the development of optimal steady-state designs of distillation systems, and then in the development of effective control structures. Unique features of the text include: * In-depth coverage of the dynamics of column design to help develop effective control structures for distillation columns * Development of rigorous simulations of single distillation columns and sequences of columns * Coverage of design and control of petroleum fractionators Encompassing nearly four decades of research and practical developments in this dynamic field, the text represents an important reference for both students and experienced engineers faced with distillation problems.

Download or read book The Chemistry of the Actinide and Transactinide Elements 3rd ed Volumes 1 5 written by L.R. Morss and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 4059 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of the Actinide and Transactinide Elements is a contemporary and definitive compilation of chemical properties of all of the actinide elements, especially of the technologically important elements uranium and plutonium, as well as the transactinide elements. In addition to the comprehensive treatment of the chemical properties of each element, ion, and compound from atomic number 89 (actinium) through to 109 (meitnerium), this multi-volume work has specialized and definitive chapters on electronic theory, optical and laser fluorescence spectroscopy, X-ray absorption spectroscopy, organoactinide chemistry, thermodynamics, magnetic properties, the metals, coordination chemistry, separations, and trace analysis. Several chapters deal with environmental science, safe handling, and biological interactions of the actinide elements. The Editors invited teams of authors, who are active practitioners and recognized experts in their specialty, to write each chapter and have endeavoured to provide a balanced and insightful treatment of these fascinating elements at the frontier of the periodic table. Because the field has expanded with new spectroscopic techniques and environmental focus, the work encompasses five volumes, each of which groups chapters on related topics. All chapters represent the current state of research in the chemistry of these elements and related fields.

Download or read book Directory of Solvents written by B.P. Whim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic solvents represent a class of compounds whose utility is central to industrial and academic chemistry. The impact of solvents in everyday products such as paints, surface coatings, adhesives, pharmaceuticals and cleaning products is enormous, and there is therefore much interest in their use. This volume is divided into two parts. Part 1 provides and authoritative review of the science and technology of solvents and related issues. The topics covered are solvency and its measurement, flammability, health and toxicology, environmental issues, legislative information, transport, storage, recovery and disposal, and a review of solvent applications. Part 2 provides reliable, up- to-date data, based on information provided by manufacturers and suppliers and is presented as a database of over 350 solvent products, subdivided by solvent group. The data are also presented in key parameter tables, covering boiling points, melting points, evaporation information, vapor pressure, flash points, solubility parameters, auto ignition temperatures, and names and addresses of manufacturers, with trade names. In recent years there has been increased interest in health and safety, environmental issues and aspects of the legislative control of chemicals, including solvents, and the choice of a given solvent has therefore become more complex. The Directory of Solvents aims to provide in one place a broad spread of physico-chemical data, together with transport, safety, environmental and classification information provided by major European and U.S. suppliers and manufacturers of industrial organic solvents.