Download or read book Using Synchronization Instructions to Exploit Parallelism in Iterative Loops written by Ramprasad Sumant and published by . This book was released on 1990 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike other schemes presented in the literature, our schemes extract a reasonable amount of parallelism, have low space overhead and do not require extra hardware. We have implemented these schemes on a shared memory multiprocessor with up to 12 processors and we have obtained reasonably good speedup."
Download or read book Architectural Alternatives for Exploiting Parallelism written by David J. Lilja and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1991 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduates, advanced undergraduates, and practicing engineers of computer architecture or system design, may find interest in the survey of various architectures within which a computer can be induced to walk and chew gum at the same time. The 37 reprinted journal articles and conference presentation
Download or read book Euro Par 2012 Parallel Processing written by Christos Kaklamanis and published by Springer. This book was released on 2012-08-23 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 18th International Conference, Euro-Par 2012, held in Rhodes Islands, Greece, in August 2012. The 75 revised full papers presented were carefully reviewed and selected from 228 submissions. The papers are organized in topical sections on support tools and environments; performance prediction and evaluation; scheduling and load balancing; high-performance architectures and compilers; parallel and distributed data management; grid, cluster and cloud computing; peer to peer computing; distributed systems and algorithms; parallel and distributed programming; parallel numerical algorithms; multicore and manycore programming; theory and algorithms for parallel computation; high performance network and communication; mobile and ubiquitous computing; high performance and scientific applications; GPU and accelerators computing.
Download or read book Handbook of Parallel Computing written by Sanguthevar Rajasekaran and published by CRC Press. This book was released on 2007-12-20 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of parallel computing to process large data sets and handle time-consuming operations has resulted in unprecedented advances in biological and scientific computing, modeling, and simulations. Exploring these recent developments, the Handbook of Parallel Computing: Models, Algorithms, and Applications provides comprehensive coverage on a
Download or read book Parallel Machines Parallel Machine Languages written by Robert A. Iannucci and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is universally accepted today that parallel processing is here to stay but that software for parallel machines is still difficult to develop. However, there is little recognition of the fact that changes in processor architecture can significantly ease the development of software. In the seventies the availability of processors that could address a large name space directly, eliminated the problem of name management at one level and paved the way for the routine development of large programs. Similarly, today, processor architectures that can facilitate cheap synchronization and provide a global address space can simplify compiler development for parallel machines. If the cost of synchronization remains high, the pro gramming of parallel machines will remain significantly less abstract than programming sequential machines. In this monograph Bob Iannucci presents the design and analysis of an architecture that can be a better building block for parallel machines than any von Neumann processor. There is another very interesting motivation behind this work. It is rooted in the long and venerable history of dataflow graphs as a formalism for ex pressing parallel computation. The field has bloomed since 1974, when Dennis and Misunas proposed a truly novel architecture using dataflow graphs as the parallel machine language. The novelty and elegance of dataflow architectures has, however, also kept us from asking the real question: "What can dataflow architectures buy us that von Neumann ar chitectures can't?" In the following I explain in a round about way how Bob and I arrived at this question.
Download or read book Using and Improving OpenMP for Devices Tasks and More written by Luiz DeRose and published by Springer. This book was released on 2014-09-23 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Workshop on OpenMP, held in Salvador, Brazil, in September 2014. The 16 technical full papers presented were carefully reviewed and selected from 18 submissions. The papers are organized in topical sections on tasking models and their optimization; understanding and verifying correctness of OpenMP programs; OpenMP memory extensions; extensions for tools and locks; experiences with OpenMP device constructs.
Download or read book Algorithms and Architectures for Parallel Processing Part II written by Yang Xiang and published by Springer. This book was released on 2011-10-23 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNCS 7016 and LNCS 7017 constitutes the refereed proceedings of the 11th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2011, held in Melbourne, Australia, in October 2011. The second volume includes 37 papers from one symposium and three workshops held together with ICA3PP 2011 main conference. These are 16 papers from the 2011 International Symposium on Advances of Distributed Computing and Networking (ADCN 2011), 10 papers of the 4th IEEE International Workshop on Internet and Distributed Computing Systems (IDCS 2011), 7 papers belonging to the III International Workshop on Multicore and Multithreaded Architectures and Algorithms (M2A2 2011), as well as 4 papers of the 1st IEEE International Workshop on Parallel Architectures for Bioinformatics Systems (HardBio 2011).
Download or read book Algorithms and Architectures for Parallel Processing written by Sheng Wen and published by Springer Nature. This book was released on 2020-01-21 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 11944-11945 constitutes the proceedings of the 19th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2019, held in Melbourne, Australia, in December 2019. The 73 full and 29 short papers presented were carefully reviewed and selected from 251 submissions. The papers are organized in topical sections on: Parallel and Distributed Architectures, Software Systems and Programming Models, Distributed and Parallel and Network-based Computing, Big Data and its Applications, Distributed and Parallel Algorithms, Applications of Distributed and Parallel Computing, Service Dependability and Security, IoT and CPS Computing, Performance Modelling and Evaluation.
Download or read book Parallel Computing Fundamentals Applications and New Directions written by E.H. D'Hollander and published by Elsevier. This book was released on 1998-07-22 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gives an overview of the state-of-the-art with respect to the development of all types of parallel computers and their application to a wide range of problem areas. The international conference on parallel computing ParCo97 (Parallel Computing 97) was held in Bonn, Germany from 19 to 22 September 1997. The first conference in this biannual series was held in 1983 in Berlin. Further conferences were held in Leiden (The Netherlands), London (UK), Grenoble (France) and Gent (Belgium). From the outset the aim with the ParCo (Parallel Computing) conferences was to promote the application of parallel computers to solve real life problems. In the case of ParCo97 a new milestone was reached in that more than half of the papers and posters presented were concerned with application aspects. This fact reflects the coming of age of parallel computing. Some 200 papers were submitted to the Program Committee by authors from all over the world. The final programme consisted of four invited papers, 71 contributed scientific/industrial papers and 45 posters. In addition a panel discussion on Parallel Computing and the Evolution of Cyberspace was held. During and after the conference all final contributions were refereed. Only those papers and posters accepted during this final screening process are included in this volume. The practical emphasis of the conference was accentuated by an industrial exhibition where companies demonstrated the newest developments in parallel processing equipment and software. Speakers from participating companies presented papers in industrial sessions in which new developments in parallel computing were reported.
Download or read book Shared Memory Parallel Programming with Open MP written by and published by Springer Science & Business Media. This book was released on 2005-02-09 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed postproceedings of the 5th International Workshop on Open MP Application and Tools, WOMPAT 2004, held in Houston, TX, USA in May 2004. The 12 revised full papers presented were carefully selected during two rounds of reviewing and improvement. The papers are devoted to using Open MP for large scale applications on several computing platforms, consideration of Open MP parallelization strategies, discussion and evaluation of several proposed language features, and compiler and tools technology.
Download or read book Advances in Computer Systems Architecture written by Thambipillai Srikanthan and published by Springer Science & Business Media. This book was released on 2005-10-13 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th Asia-Pacific Computer Systems Architecture Conference, ACSAC 2005, held in Singapore in October 2005. The 65 revised full papers presented were carefully reviewed and selected from 173 submissions. The papers are organized in topical sections on energy efficient and power aware techniques, methodologies and architectures for application-specific systems, processor architectures and microarchitectures, high-reliability and fault-tolerant architectures, compiler and OS for emerging architectures, data value predictions, reconfigurable computing systems and polymorphic architectures, interconnect networks and network interfaces, parallel architectures and computation models, hardware-software partitioning, verification, and testing of complex architectures, architectures for secured computing, simulation and performance evaluation, architectures for emerging technologies and applications, and memory systems hierarchy and management.
Download or read book Languages and Compilers for Parallel Computing written by Gheorghe Almási and published by Springer Science & Business Media. This book was released on 2007-05-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 19th International Workshop on Languages and Compilers for Parallel Computing, LCPC 2006, held in New Orleans, LA, USA in November 2006. The 24 revised full papers presented together with two keynote talks cover programming models, code generation, parallelism, compilation techniques, data structures, register allocation, and memory management.
Download or read book Transition of HPC Towards Exascale Computing written by E.H. D'Hollander and published by IOS Press. This book was released on 2013-10-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US, Europe, Japan and China are racing to develop the next generation of supercomputers – exascale machines capable of 10 to the 18th power calculations a second – by 2020. But the barriers are daunting: the challenge is to change the paradigm of high-performance computing. The 2012 biennial high performance workshop, held in Cetraro, Italy in June 2012, focused on the challenges facing the computing research community to reach exascale performance in the next decade. This book presents papers from this workshop, arranged into four major topics: energy, scalability, new architectural concepts and programming of heterogeneous computing systems. Chapter 1 introduces the status of present supercomputers, which are still about two orders of magnitude separated from the exascale mark. Chapter 2 examines energy demands, a major limiting factor of today's fastest supercomputers; the quantum leap in performance required for exascale computing will require a shift in architectures and technology. In Chapter 3, scalable computer paradigms for dense linear algebra on massive heterogeneous systems are presented, and Chapter 4 discusses architectural concepts. Finally, Chapter 5 addresses the programming of heterogeneous systems. This book will be of interest to all those wishing to understand how the development of modern supercomputers is set to advance in the next decade.
Download or read book Euro Par 2018 Parallel Processing written by Marco Aldinucci and published by Springer. This book was released on 2018-08-20 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 24th International Conference on Parallel and Distributed Computing, Euro-Par 2018, held in Turin, Italy, in August 2018. The 57 full papers presented in this volume were carefully reviewed and selected from 194 submissions. They were organized in topical sections named: support tools and environments; performance and power modeling, prediction and evaluation; scheduling and load balancing; high performance architecutres and compilers; parallel and distributed data management and analytics; cluster and cloud computing; distributed systems and algorithms; parallel and distributed programming, interfaces, and languages; multicore and manycore methods and tools; theory and algorithms for parallel computation and networking; parallel numerical methods and applications; and accelerator computing for advanced applications.
Download or read book Job Scheduling Strategies for Parallel Processing written by Dror G. Feitelson and published by Springer Science & Business Media. This book was released on 1995-07-19 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers selected after a very careful refereeing process for presentation during the Workshop on Job Scheduling Stategies for Parallel Processing, held in Santa Barbara, California, as a prelude to the IPPS '95 conference in April 1995. The 19 full papers presented demonstrate that parallel job scheduling takes on a crucial role as multi-user parallel supercomputers become more widespread. All aspects of job scheduling for parallel systems are covered, from the perspectives of academic research, industrial design of parallel systems, as well as user needs. Of particular interest, also for nonexpert readers, is the introductory paper "Parallel Job Scheduling: Issues and Approaches" by the volume editors.
Download or read book Euro Par 2010 Parallel Processing written by Pasqua D'Ambra and published by Springer Science & Business Media. This book was released on 2010-08-18 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Euro-Par Conference held in Ischia, Italy, in August/September 2010. The 90 revised full papers presented were carefully reviewed and selected from 256 submissions. The papers are organized in topical sections on support tools and environments; performance prediction and evaluation; scheduling and load-balancing; high performance architectures and compilers; parallel and distributed data management; grid, cluster and cloud computing; peer to peer computing; distributed systems and algorithms; parallel and distributed programming; parallel numerical algorithms; multicore and manycore programming; theory and algorithms for parallel computation; high performance networks; and mobile and ubiquitous computing.
Download or read book Parallel Programming in OpenMP written by Rohit Chandra and published by Morgan Kaufmann. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software -- Programming Techniques.
