Download or read book Use of Rapid Microbial Kits for Regular Monitoring of Food contact Surfaces Towards Hygiene Practices written by Maznid Saad and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Food Analysis and Hygiene Monitoring written by Pierre-Jean Raugel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROF. DR. ELKE ANKlAM Food control is essential for consumer protection. Due to the fact that agricul ture and food technology have increased rapidly in the past the analytical prob lems concerning food have become more complex. The consumer expects com petitively priced food of consistently high quality. The main consumer concerns are food safety and food quality including authenticity proof. Many national or international official, validated, reference or routine methods are existing. Food be performed rapidly especially in the fields of microbiological control has to contamination and customs control. This handbook describes many kits, instruments and systems used for quality control of food. The tools listed are not only restricted to validated analytical methods but are also foreseen for routine and screening methods. In addition, an address list of manufacturers, distributors and sales agencies is given to gether with a list and information concerning selected expert laboratories. In this edition, emphasis is put on validation procedures of three organizations (AOAC, AFNOR and Microval). The purpose of this book is to facilitate the purchase and use of kits needed for food analysis and is therefore an important help for food analysts.
Download or read book Engineering Aspects of Food Quality and Safety written by H. Umesh Hebbar and published by Springer Nature. This book was released on 2023-09-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Food Quality and Safety aims to fill the knowledge gap in current technological advances and methods for food safety and quality, dedicating entire sections to analytical techniques from quality testing to packaging, post-harvest methods from product utilization to storage to chemical engineering principles and pre-harvest interventions from genetic engineering and mechanization to the links between pre-and-post harvest techniques. Throughout the book, global policy perspectives are taken into account. An introductory section is also included to cover the role of food processing and engineering in food quality and safety improvement. Encompassing all of the major applications and challenges involved in the engineering aspects of food safety and quality in one source, this work is incredibly valuable to a wide range of food engineers, scientists, and industry professionals involved in the engineering, processing and packaging of both novel and traditional foods. This text provides a detailed overview of the newest methods and advanced technologies used in the improvement of quality and safety in foods. The processes and methods described in this book are applicable to many areas of the food industry including pre-harvest and post-harvest technology, food machinery and product formulation. Featuring contributions from prominent food scientists and engineers across the globe, this work contains detailed coverage of the latest advances in genetic and chemical engineering, mechanization, thermal and non-thermal processing, automation, computational tools, packaging and waste management. The latest analytical techniques are also covered, including chapters dedicated to in-line monitoring, nanosensors, rapid testing kits and E-sensors. Maintaining a high standard of safety for consumers in foods is an interdisciplinary effort involving biologists, chemists, nutritionists, chemical engineers, mechanical engineers and genetic engineers among others. All of these experts will find this book to be a singular source encompassing all of the major current advances in food safety engineering and processing.
Download or read book The Use of Drugs in Food Animals written by National Research Council and published by National Academies Press. This book was released on 1999-01-12 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of drugs in food animal production has resulted in benefits throughout the food industry; however, their use has also raised public health safety concerns. The Use of Drugs in Food Animals provides an overview of why and how drugs are used in the major food-producing animal industriesâ€"poultry, dairy, beef, swine, and aquaculture. The volume discusses the prevalence of human pathogens in foods of animal origin. It also addresses the transfer of resistance in animal microbes to human pathogens and the resulting risk of human disease. The committee offers analysis and insight into these areas: Monitoring of drug residues. The book provides a brief overview of how the FDA and USDA monitor drug residues in foods of animal origin and describes quality assurance programs initiated by the poultry, dairy, beef, and swine industries. Antibiotic resistance. The committee reports what is known about this controversial problem and its potential effect on human health. The volume also looks at how drug use may be minimized with new approaches in genetics, nutrition, and animal management.
Download or read book Food Safety Theory and Practice written by Paul Knechtges and published by Jones & Bartlett Publishers. This book was released on 2012 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for graduate students or college seniors, Food Safety: Theory and Practice emphasizes a comprehensive and multidisciplinary approach to food safety. It covers important topics related to the prevention of foodborne illnesses and diseases with a “farm-to-fork” perspective. Each chapter starts with a set of learning objectives for the student and ends with a list of important references and websites for further study and research. Scientific principles that underpin food safety are introduced, and terminology is explained to facilitate comprehension by the student. In keeping with current trends, risk analysis and food safety management are stressed throughout the textbook. The writing style is concise and to the point, and the book contains hundreds of references, figures, and tables. Extremely well organized, this book can serve as the primary text for a food safety course, or it can serve as a background text for more specialized courses in food safety. Key topics include: Risk and hazard analysis of goods - covers risk assessment and hazard analysis and critical control point (HACCP) evaluations of food safety. Safety management of the food supply - provides a farm-to-fork overview of food safety, emphasizing the risks associated with each step in the food supply. Food safety laws, regulations, enforcement, and responsibilities - describes the major provisions, relationship, and hierarchy of laws and guidelines designed to ensure a safe food supply. The pivotal role of food sanitation/safety inspectors - including the interpretation of standards, problem solving and decision making, education of the food handling staff, and participation in foodborne illness outbreak investigations.
Download or read book Food Processing Technology written by P.J. Fellows and published by Woodhead Publishing. This book was released on 2022-06-18 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Processing Technology: Principles and Practice, Fifth Edition includes emerging trends and developments in food processing. The book has been fully updated to provide comprehensive, up-to-date technical information. For each food processing unit operation, theory and principles are first described, followed by equipment used commercially and its operating conditions, the effects of the operation on micro-organisms, and the nutritional and sensory qualities of the foods concerned. Part I describes basic concepts; Part II describes operations that take place at ambient temperature; Part III describes processing using heat; Part IV describes processing by removing heat; and Part V describes post-processing operations. This book continues to be the most comprehensive reference in the field, covering all processing unit operations in a single volume. The title brings key terms and definitions, sample problems, recommended further readings and illustrated processes. - Presents current trends on food sustainability, environmental considerations, changing consumer choices, reduced packaging and energy use, and functional and healthy/plant-based foods - Includes highly illustrated line drawings and/or photographs to show the principles of equipment operation and/or examples of equipment that is used commercially - Contains worked examples of common calculations
Download or read book Index Medicus written by and published by . This book was released on 2003 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book Journal of Food Protection written by and published by . This book was released on 1994 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Food Sanitation written by Norman G. Marriott and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large volume food processing and preparation operations have increased the need for improved sanitary practices from processing to consumption. This trend presents a challenge to every employee in the food processing and food prepara tion industry. Sanitation is an applied science for the attainment of hygienic conditions. Because of increased emphasis on food safety, sanitation is receiving increased attention from those in the food industry. Traditionally, inexperienced employees with few skills who have received little or no training have been delegated sanitation duties. Yet sanitation employees require intensive training. In the past, these employees, including sanitation program managers, have had only limited access to material on this subject. Technical information has been confined primarily to a limited number of training manuals provided by regulatory agen cies, industry and association manuals, and recommendations from equipment and cleaning compound firms. Most of this material lacks specific information related to the selection of appropriate cleaning methods, equipment, compounds, and sanitizers for maintaining hygienic conditions in food processing and prepara tion facilities. The purpose of this text is to provide sanitation information needed to ensure hygienic practices. Sanitation is a broad subject; thus, principles related to con tamination, cleaning compounds, sanitizers, and cleaning equipment, and specific directions for applying these principles to attain hygienic conditions in food processing and food preparation are discussed. The discussion starts with the importance of sanitation and also includes regulatory requirements and voluntary sanitation programs including additional and updated information on Hazard Analysis Critical Control Points (HACCP).
Download or read book Ensuring Safe Food written by Committee to Ensure Safe Food from Production to Consumption and published by National Academies Press. This book was released on 1998-09-02 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: How safe is our food supply? Each year the media report what appears to be growing concern related to illness caused by the food consumed by Americans. These food borne illnesses are caused by pathogenic microorganisms, pesticide residues, and food additives. Recent actions taken at the federal, state, and local levels in response to the increase in reported incidences of food borne illnesses point to the need to evaluate the food safety system in the United States. This book assesses the effectiveness of the current food safety system and provides recommendations on changes needed to ensure an effective science-based food safety system. Ensuring Safe Food discusses such important issues as: What are the primary hazards associated with the food supply? What gaps exist in the current system for ensuring a safe food supply? What effects do trends in food consumption have on food safety? What is the impact of food preparation and handling practices in the home, in food services, or in production operations on the risk of food borne illnesses? What organizational changes in responsibility or oversight could be made to increase the effectiveness of the food safety system in the United States? Current concerns associated with microbiological, chemical, and physical hazards in the food supply are discussed. The book also considers how changes in technology and food processing might introduce new risks. Recommendations are made on steps for developing a coordinated, unified system for food safety. The book also highlights areas that need additional study. Ensuring Safe Food will be important for policymakers, food trade professionals, food producers, food processors, food researchers, public health professionals, and consumers.
Download or read book Principles of Food Sanitation written by Norman G. Marriott and published by Springer. This book was released on 2018-03-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its 6th Edition, this highly acclaimed textbook provides sanitation information needed to ensure hygienic practices and safe food for food industry personnel as well as students. It addresses the principles related to contamination, cleaning compounds, sanitizers, cleaning equipment. It also presents specific directions for applying these concepts to attain hygienic conditions in food processing or food preparation operations. New in this edition: Updated chapters on the fundamentals of food sanitation, contamination sources and hygiene, Hazard Analysis Critical Control Points, cleaning and sanitizing equipment, waste handling disposal, biosecurity, allergens, quality assurance, pest control, cleaning compound and sanitizer properties and selection criteria, hygienic construction, sanitation guidelines for food and foodservice establishments, and sanitation management principles.
Download or read book Advances in Applied Microbiology written by and published by Elsevier. This book was released on 2011-07-29 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published since 1959, Advances in Applied Microbiology continues to be one of the most widely read and authoritative review sources in Microbiology.The series contains comprehensive reviews of the most current research in applied microbiology. Recent areas covered include bacterial diversity in the human gut, protozoan grazing of freshwater biofilms, metals in yeast fermentation processes and the interpretation of host-pathogen dialogue through microarrays.Eclectic volumes are supplemented by thematic volumes on various topics including Archaea and Sick Building Syndrome.Impact factor for 2003: 1.893
Download or read book The Microbiology of Safe Food written by Stephen J. Forsythe and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring food microbiology, its impact upon consumer safety, and the latest strategies for reducing its associated risks As our methods of food production advance, so too does the need for a fuller understanding of food microbiology and the critical ways in which it influences food safety. The Microbiology of Safe Food satisfies this need, exploring the processes and effects of food microbiology with a detailed, practical approach. Examining both food pathogens and spoilage organisms, microbiologist Stephen J. Forsythe covers topics ranging from hygiene regulations and product testing to microbiological criteria and sampling plans. This third edition has been thoroughly revised to cater to the food scientists and manufacturers of today, addressing such new areas as: Advances in genomic analysis techniques for key organisms, including E. coli, Salmonella, and L. monocytogenes Emerging information on high-throughput sequencing and genomic epidemiology based on genomic analysis of isolates Recent work on investigations into foodborne infection outbreaks, demonstrating the public health costs of unsafe food production Updates to the national and international surveillance systems, including social media Safe food for consumers is the ultimate goal of food microbiology. To that end, The Microbiology of Safe Food focuses on the real-world applications of the latest science, making it an essential companion for all those studying and working in food safety.
Download or read book Fish Canning Handbook written by Les Bratt and published by John Wiley & Sons. This book was released on 2010-09-29 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fish Canning Handbook Fish Canning Handbook Edited by Les Bratt Canning continues to be an extremely important form of food preservation commercially, and canned fish represents a source of relatively inexpensive, nutritious and healthy food which is stable at ambient temperatures, has long shelf life and in consequence is eminently suitable for worldwide distribution. It is vitally important that all canning operations are undertaken in keeping with the rigorous application of good manufacturing practices if the food is to be safe at the point of consumption. This demands that all personnel involved in the management and operation of cannery operations have a competent understanding of the technologies involved, including the basic requirements for container integrity and safe heat sterilisation. This book provides a source of up to date and detailed technical information for all those involved in the production of canned fish, from students thinking of entering the industry, to regulatory authorities with responsibility for official inspection, trading companies and retail organisations who purchase canned fish, as well as the manufacturers themselves. An exhaustive range of topics is covered in 15 chapters, including: the current global market; processing, packaging and storage operations; food safety and quality assurance; international legal requirements and laboratory analysis. Also available from Wiley-Blackwell Fishery Products: Quality, safety and authenticity Edited by H. Rehbein and J. Oehlenschläger ISBN 978-1-4051-4162-8 Handbook of Seafood Quality, Safety and Health Applications Edited by C. Alasalvar, F. Shahidi, K. Miyashita and U. Wanasundara ISBN 978-1-4051-8070-2 Fish Processing: Sustainability and new opportunities Edited by G. Hall ISBN 978-1-4051-9047-3
Download or read book Handbook of Hygiene Control in the Food Industry written by John Holah and published by Woodhead Publishing. This book was released on 2016-06-10 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Hygiene Control in the Food Industry, Second Edition, continues to be an authoritative reference for anyone who needs hands-on practical information to improve best practices in food safety and quality. The book is written by leaders in the field who understand the complex issues of control surrounding food industry design, operations, and processes, contamination management methods, route analysis processing, allergenic residues, pest management, and more. Professionals and students will find a comprehensive account of risk analysis and management solutions they can use to minimize risks and hazards plus tactics and best practices for creating a safe food supply, farm to fork. - Presents the latest research and development in the field of hygiene, offering a broad range of the microbiological risks associated with food processing - Provides practical hygiene related solutions in food facilities to minimize foodborne pathogens and decrease the occurrence of foodborne disease - Includes the latest information on biofilm formation and detection for prevention and control of pathogens as well as pathogen resistance
Download or read book Handbook of Frozen Foods written by Y. H. Hui and published by CRC Press. This book was released on 2004-03-29 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hui, a technology consultant, presents material on frozen food science, technology, and engineering, describing the manufacture, processing, inspection, and safety of frozen foods. He outlines basic procedures for optimizing the quality and texture of frozen foods and includes and tables and examples that illustrate the effects of various chemical and biochemical reactions on the quality of frozen food. The book details methods for selecting the most appropriate packaging materials for frozen foods, and provides guidelines on ensuring product safety.
Download or read book Food Microbiology written by Karl R. Matthews and published by John Wiley & Sons. This book was released on 2020-08-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative coverage presented in a format designed to facilitate teaching and learning.
