Download or read book Use of Full Flow Penetrometers in Soft Clay written by Nicholas J. Yafrate and published by . This book was released on 2008 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommended Practice for Full Flow Penetrometer Testing and Analysis written by Jason DeJong and published by . This book was released on 2010 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of full-flow penetrometers for estimating the undrained and remolded shear strength as well as soil sensitivity of soft sediments by both industry and researchers has resulted in a rather rapid maturation of this new in situ test method over the past decade. Experimental, analytical, and numerical analysis results for full-flow penetrometers are now sufficient to provide recommended practices regarding equipment design, testing procedures, and data analysis. Equipment design must consider both physical attributes of the penetrometers and electronic design and data acquisition. The testing procedures presented are modified from standard test methods for the piezocone with additions for evaluation of remolded strength by cycling and rate effects through variable penetration rate testing. Data reduction includes methods for normalizing the penetration resistance data for comparison between test sites and depths and methods for estimating undrained and remolded shear strength as well as soil sensitivity. All recommendations are summarized in a guidance table.

Download or read book Shearing Failure Visualization Via Particle Tracking in Soft Clay Using a Transparent Soil written by Christopher M. Chini and published by . This book was released on 2015 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: In situ undrained shear strength measurement devices such as the vane shear test, cone penetrometer, and full-flow penetrometers (e.g., T-bar and ball) have been increasingly used as a part of geotechnical site investigations for soft clay deposits. Previous attempts to visualize the shear failure surfaces on these devices included either significant disturbance of the soil sample (permeated with resin and thin-sectioning) or involved methods of shearing along a transparent surface creating boundary effects. This paper described the use of non-invasive testing procedures to determine the failure surface of several in situ shear strength measurement devices in a soft clay surrogate (LAPONITE RD, a trademark of BYK Additives and Instruments). A series of tests were performed using two sizes of rectangular miniature vanes, two types of full flow penetrometer tests (T-bar and ball), and a cone penetrometer in LAPONITE RD samples. Laser planes were used to illuminate particles in the transparent material during shearing. Particle tracking techniques were used to visualize the failure surfaces and flow mechanisms for each device. Experimental results were compared with theoretical and numerical simulations of the failure surfaces and flow characteristics by previous researchers. The present work contributed to the understanding of undrained shear strength testing devices by an in situ assessment of the evolution, geometry, and structure of the failure surfaces and full-flow mechanisms.

Download or read book From Fundamentals to Applications in Geotechnics written by D. Manzanal and published by IOS Press. This book was released on 2015-12-11 with total page 3344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work of geotechnical engineers contributes to the creation of safe, economic and pleasant spaces to live, work and relax all over the world. Advances are constantly being made, and the expertise of the profession becomes ever more important with the increased pressure on space and resources. This book presents the proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), held in Buenos Aires, Argentina, in November 2015. This conference, held every four years, is an important opportunity for international experts, researchers, academics, professionals and geo-engineering companies to meet and exchange ideas and research findings in the areas of soil mechanics, rock mechanics, and their applications in civil, mining and environmental engineering. The articles are divided into nine sections: transportation geotechnics; in-situ testing; geo-engineering for energy and sustainability; numerical modeling in geotechnics; foundations and ground improvement; unsaturated soil behavior; embankments, dams and tailings; excavations and tunnels; and geo-risks, and cover a wide spectrum of issues from fundamentals to applications in geotechnics. This book will undoubtedly represent an essential reference for academics, researchers and practitioners in the field of soil mechanics and geotechnical engineering. In this proceedings, approximately 65% of the contributions are in English, and 35% of the contributions are in Spanish or Portuguese.

Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.

Download or read book Issues in Global Environment Biology and Geoscience 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Global Environment—Biology and Geoscience: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Tropical Research. The editors have built Issues in Global Environment—Biology and Geoscience: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Tropical Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Global Environment—Biology and Geoscience: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Geotechnical and Geophysical Site Characterization written by An-Bin Huang and published by CRC Press. This book was released on 2008-04-04 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical and Geophysical Site Characterization collects the papers presented at the Third International Conference on Site Characterization (ISC 3) that took place in Taipei from April 1-4, 2008. The subjects covered include new developments in mechanical in-situ testing and interpretation techniques, statistical analysis of test data, geo

Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.

Download or read book Frontiers in Offshore Geotechnics written by Susan Gourvenec and published by CRC Press. This book was released on 2005-10-13 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses current and emerging challenges facing those working in offshore construction, design and research. Keynote papers from leading industry practitioners and academics provide a comprehensive overview of central topics covering deepwater anchoring, pipelines, foundation solutions for offshore wind turbines, site investigation, geoh

Download or read book Advances in Offshore Geotechnics written by Sumanta Haldar and published by Springer Nature. This book was released on 2020-09-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the First Indian Symposium on Offshore Geotechnics. It addresses state of the art and emerging challenges in offshore design and construction. The theme papers from leading academicians and practitioners provide a comprehensive overview of the broad topics encompassing various challenges in offshore geotechnical engineering. It covers various aspects pertaining to offshore geotechnics, such as offshore site investigation, soil characterization, geotechnics related to offshore renewable energy converters, offshore foundations and anchoring systems, pipelines, and deep sea explorations. This volume provides a comprehensive reference for professionals and researchers in offshore, civil and maritime engineering and for soil mechanics specialists.

Download or read book Frontiers in Offshore Geotechnics II written by Susan Gourvenec and published by CRC Press. This book was released on 2010-10-04 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics II comprises the Proceedings of the Second International Symposium on Frontiers in Offshore Geotechnics (ISFOG), organised by the Centre for Offshore Foundation Systems (COFS) and held at the University of Western Australia (UWA), Perth from 8 10 November 2010. The volume addresses current and emerging challenges

Download or read book Performance of Penetrometers in Deepwater Soft Soil Characterisation written by Han Eng Low and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore developments for hydrocarbon resources have now progressed to water depths approaching 2500 m. Due to the difficulties and high cost in recovering high quality samples from deepwater site, there is increasing reliance on in situ tests such as piezocone and full-flow (i.e. T-bar and ball) penetration tests for determining the geotechnical design parameters. This research was undertaken in collaboration with the Norwegian Geotechnical Institute (NGI), as part of a joint industry project, to improve the reliability of in situ tests in determining design parameters and to improve offshore site investigation practice in deepwater soft sediments. In this research, a worldwide high quality database was assembled and used to correlate intact and remoulded shear strengths (measured from laboratory and vane shear tests) with penetration resistances measured by piezocone, T-bar and ball penetrometers. The overall statistics showed similar and low levels of variability of resistance factors for intact shear strength (N-factors) for all three types of penetrometer. In the correlation between the remoulded penetration resistance and remoulded shear strength, the resistance factors for remoulded shear strength (Nrem-factors) were found higher than the N-factors. As a result, the resistance sensitivity is less than the strength sensitivity. The correlations between the derived N-factors and specific soil characteristics indicated that the piezocone N-factors are more influenced by rigidity index than those for the T-bar and ball penetrometers. The effect of strength anisotropy is only apparent in respect of N-factors for the T-bar and ball penetrometers correlated to shear strengths measured in triaxial compression. On the other hand, the Nrem-factors showed slight tendency to increase with increasing strength sensitivity but were insensitive to soil index properties. These findings suggest that the full-flow penetrometers may be used to estimate remoulded shear strength and are potentially prove more reliable than the piezocone in estimating average or vane shear strength for intact soil but the reverse is probably true for the estimation of triaxial compression strength.

Download or read book The Penetrometer and Soil Exploration written by G. Sanglerat and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Penetrometer and Soil Exploration: Interpretation of Penetration Diagrams—Theory presents the many uses of the penetrometer for investigating soil conditions. Testing methods include the following: (1) in situ load tests on full-scale foundations; (2) laboratory testing of undisturbed samples, and (3) in situ testing of soils. The book regards the advantages of using the penetrometer as a handy tool in drilling and sampling. The text emphasizes that the investigator should never rely entirely on the analogy or the extrapolation of information pertaining to a nearby site. The text describes the different shapes of the penetrometer diagrams obtained from tests in homogeneous cohesionless soil, as well as the significance of the embedment of a pile into the bearing stratum for deep foundation designs. The paper discusses the De Beer theory, Kerisel's theory, and the theory developed at the Delft Laboratory of Soil Mechanics. The laboratory determines the maximum soil pressure and the corresponding embedment of the pile. According to Professor L'Herminier, "the bearing capacity of a pile may be determined...from laboratory tests on soil samples, the other by extrapolating penetrometer data." The book is suitable for structural engineers, civil engineers, geologists, architects, and students of soil mechanics.

Download or read book Transportation Water and Environmental Geotechnics written by C. N. V. Satyanarayana Reddy and published by Springer Nature. This book was released on 2021-08-02 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the Indian Geotechnical Conference 2020 (IGC2020) focusing on emerging opportunities and challenges in the field of transportation geotechnics, scour and erosion, offshore geotechnics, and environmental geotechnology. The contents will be useful to researchers, educators, practitioners and policy makers alike.

Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Download or read book Geotechnical Site Characterization written by Anirban De and published by Momentum Press. This book was released on 2016-03-02 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of site characterization is unique to geotechnical engineering and owes its significance directly to the variability of the natural geologic deposits on the earth’s surface. Proper site characterization requires an understanding of various field and laboratory investigation methods. The book discusses the suitability of various methods under different site conditions and presents the procedures to derive design parameters based on interpretation of test results. Recent developments in specialized site characterization methods (such as seismic hazard evaluation) are also included. Three recent case histories are presented, where site characterization played a key role. The three disparate cases include soft natural soil under static loading, coarse and fine-grained soil under seismic impact, and hazardous waste deposits under both static and seismic loading. Site investigation requirements of building codes are discussed and guidelines for preparing a typical site characterization report are presented. The book is aimed at the practicing geotechnical engineer, as well as advanced undergraduate and graduate students.

Download or read book Soft Soil Engineering written by Dave H. Chan and published by CRC Press. This book was released on 2006-09-28 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft soils present particular challenges to engineers and an understanding of the specific characteristics of these soils is indispensable. Laboratory techniques such as numerical modelling, theoretical analysis and constitutive modelling give new insights into soft soil material behaviour, while large-scale testing in the field provides important information in areas such as slope stability and soft soil improvements. This collection of papers from the Fourth International Conference on Soft Soil Engineering, Vancouver, 2006, presents an international appraisal of current research and new advances in engineering practices, illustrating the theory with relevant case studies. Geotechnical professionals, engineers, academics and researchers working in the areas of soft ground engineering and soft soil engineering will find this a valuable book.