Download or read book Use of DRACS to Enhance HTGRs Passive Safety and Economy written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper discusses the use of DRACS to Enhance HTGRs Passive Safety and Economy. One of the important requirements for Gen. IV High Temperature Gas Cooled Reactors (HTGR) is passive safety. Currently all the HTGR designs use Reactor Vessel Auxiliary Cooling System (RVACS) for passive decay heat removal. [1] The decay heat first is transferred to core barrel by conduction and radiation, and then to reactor vessel by thermal radiation and convection; finally the decay heat is transferred to natural circulated air or water systems. RVACS can be characterized as a surface based decay heat removal system. Similar concepts have been widely used in sodium cooled fast reactor (SFR) designs, advanced light water reactors like AP1000. The RVACS is especially suitable for smaller power reactors since small systems have relatively larger surface area. RVACS tends to be less expensive. However, it limits the largest achievable power level for modular HTGRs due to the mismatch between the reactor power (proportional to volume) and decay heat removal capability (proportional to surface). When the relative decay heat removal capability is reduced, the peak fuel temperature increases, even close to the design limit. Annual designs with internal reflector can mitigate this effect therefore further increase the power. Another way to increase power is to increase power density. However, it is also limited by the decay heat removal capability. Besides safety, HTGRs also need to be economical in order to compete with other reactor designs. The limit of decay heat removal capability set by using RVACS has affected the economy of HTGRs. Forsberg [2] pointed out other disadvantages of using RVACS such as conflicting functional requirements for the reactor vessel and scaling distortion for integral effect test of the system performance. A potential alternative solution is to use a volume based passive decay removal system, call Direct Reactor Auxiliary Cooling Systems (DRACS), to remove or mitigate the limitation on decay heat removal capability. DRACS has been widely used in SFR designs and in liquid salt cooled high temperature reactors. The containment cooling system in BWR is another example of volume based decay removal systems. DRACS composes of natural circulation loops with two sets of heat exchangers, one in reactor side and another is in environment side. DRACS has the benefits of increasing the power as needed (scalability) and modularity. This paper introduces the concept of using DRACS to enhance HTGRs passive safety and economy.

Download or read book Nuclear Reactor Technology Development and Utilization written by Salah Ud-Din Khan and published by Woodhead Publishing. This book was released on 2020-06-16 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Reactor Technology Development and Utilization presents the theory and principles of the most common advanced nuclear reactor systems and provides a context for the value and utilization of nuclear power in a variety of applications both inside and outside a traditional nuclear setting. As countries across the globe realize their plans for a sustainable energy future, the need for innovative nuclear reactor design is increasing, and this book will provide a deep understanding of how these technologies can aid in a region’s goal for clean and reliable energy. Dr Khan and Dr Nakhabov, alongside their team of expert contributors, discuss a variety of important topics, including nuclear fuel cycles, plant decommissioning and hybrid energy systems, while considering a variety of diverse uses such as nuclear desalination, hydrogen generation and radioisotope production. Knowledge acquired enables the reader to conduct further research in academia and industry, and apply the latest design, development, integration, safety and economic guidance to their work and research. Combines reactor fundamentals with a contemporary look at evolving trends in the design of advanced reactors and their application to both nuclear and non-nuclear uses Analyses the latest research and uses of hybrid systems which bring together nuclear technology with renewable energy technologies Presents applications, economic factors and an analysis of sustainability factors in one comprehensive resource

Download or read book Handbook of Small Modular Nuclear Reactors written by Daniel T. Ingersoll and published by Woodhead Publishing. This book was released on 2020-10-22 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Small Modular Nuclear Reactors, Second Edition is a fully updated comprehensive reference on Small Modular Reactors (SMRs), which reflects the latest research and technological advances in the field from the last five years. Editors Daniel T. Ingersoll and Mario D. Carelli, along with their team of expert contributors, combine their wealth of collective experience to update this comprehensive handbook that provides the reader with all required knowledge on SMRs, expanding on the rapidly growing interest and development of SMRs around the globe. This book begins with an introduction to SMRs for power generation, an overview of international developments, and an analysis of Integral Pressurized Water Reactors as a popular class of SMRs. The second part of the book is dedicated to SMR technologies, including physics, components, I&C, human-system interfaces and safety aspects. Part three discusses the implementation of SMRs, covering economic factors, construction methods, hybrid energy systems and licensing considerations. The fourth part of the book provides an in-depth analysis of SMR R&D and deployment of SMRs within eight countries, including the United States, Republic of Korea, Russia, China, Argentina, and Japan. This edition includes brand new content on the United Kingdom and Canada, where interests in SMRs have increased considerably since the first edition was published. The final part of the book adds a new analysis of the global SMR market and concludes with a perspective on SMR benefits to developing economies. This authoritative and practical handbook benefits engineers, designers, operators, and regulators working in nuclear energy, as well as academics and graduate students researching nuclear reactor technologies. Presents the latest research on SMR technologies and global developments Includes new case study chapters on the United Kingdom and Canada and a chapter on global SMR markets Discusses new technologies such as floating SMRs and molten salt SMRs

Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.

Download or read book Small Modular Reactors for Electricity Generation written by Jorge Morales Pedraza and published by Springer. This book was released on 2017-03-11 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a flexible, cost-effective energy alternative to large scale nuclear power reactors, this book examines the potential future use of small modular reactors for the generation of electricity in different regions. Exploring advanced nuclear technologies, chapters describe the current situation and perspective of the small modular reactors market (SMRs) in different regions around the word, including North and South America, Europe, Asia, Middle East and Africa. Particular attention is paid to the benefits of using these types of reactors for the generation of electricity, discussing their efficiency and reduced construction time, as well as exploring the main difficulties encountered in the development stage. Looking at the potential dangers that SMRs pose to the environment and population, the text presents the new safety measures that have been adopted in SMRs design to reduce future risk.

Download or read book INIS Atomindex written by and published by . This book was released on 1995 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molten Salt Reactors and Thorium Energy written by Thomas James Dolan and published by Elsevier. This book was released on 2024-01-25 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molten Salt Reactors and Thorium Energy, Second Edition is a fully updated comprehensive reference on the latest advances in MSR research and technology. Building on the successful first edition, Tom Dolan and the team of experts have fully updated the content to reflect the impressive advances from the last 5 years, ensuring this book continues to be the go-to reference on the topic. This new edition covers progress made in MSR design, details innovative experiments, and includes molten salt data, corrosion studies and deployment plans. The successful case studies section of the first edition have been removed, expanded, and fully updated, and are now published in a companion title called Global Case Studies on Molten Salt Reactors. Readers will gain a deep understanding of the advantages and challenges of MSR development and thorium fuel use, as well as step-by-step guidance on the latest in MSR reactor design. Each chapter provides a clear introduction, covers technical issues and includes examples and conclusions, while promoting the sustainability benefits throughout. A fully updated comprehensive handbook on Molten Salt Reactors and Thorium Energy, written by a team of global experts Covers MSR applications, technical issues, reactor types and reactor designs Includes 3 brand new chapters which reflect the latest advances in research and technology since the first edition published Presents case studies on molten salt reactors which aid in the transition to net zero by providing abundant clean, safe energy to complement wind and solar powe

Download or read book Nuclear Power Plant Design and Analysis Codes written by Jun Wang and published by Woodhead Publishing. This book was released on 2020-11-10 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Power Plant Design and Analysis Codes: Development, Validation, and Application presents the latest research on the most widely used nuclear codes and the wealth of successful accomplishments which have been achieved over the past decades by experts in the field. Editors Wang, Li,Allison, and Hohorst and their team of authors provide readers with a comprehensive understanding of nuclear code development and how to apply it to their work and research to make their energy production more flexible, economical, reliable and safe.Written in an accessible and practical way, each chapter considers strengths and limitations, data availability needs, verification and validation methodologies and quality assurance guidelines to develop thorough and robust models and simulation tools both inside and outside a nuclear setting. This book benefits those working in nuclear reactor physics and thermal-hydraulics, as well as those involved in nuclear reactor licensing. It also provides early career researchers with a solid understanding of fundamental knowledge of mainstream nuclear modelling codes, as well as the more experienced engineers seeking advanced information on the best solutions to suit their needs. Captures important research conducted over last few decades by experts and allows new researchers and professionals to learn from the work of their predecessors Presents the most recent updates and developments, including the capabilities, limitations, and future development needs of all codes Incudes applications for each code to ensure readers have complete knowledge to apply to their own setting

Download or read book Heat Transfer written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2022-04-05 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: HEAT TRANSFER Provides authoritative coverage of the fundamentals of heat transfer, written by one of the most cited authors in all of Engineering Heat Transfer presents the fundamentals of the generation, use, conversion, and exchange of heat between physical systems. A pioneer in establishing heat transfer as a pillar of the modern thermal sciences, Professor Adrian Bejan presents the fundamental concepts and problem-solving methods of the discipline, predicts the evolution of heat transfer configurations, the principles of thermodynamics, and more. Building upon his classic 1993 book Heat Transfer, the author maintains his straightforward scientific approach to teaching essential developments such as Fourier conduction, fins, boundary layer theory, duct flow, scale analysis, and the structure of turbulence. In this new volume, Bejan explores topics and research developments that have emerged during the past decade, including the designing of convective flow and heat and mass transfer, the crucial relationship between configuration and performance, and new populations of configurations such as tapered ducts, plates with multi-scale features, and dendritic fins. Heat Transfer: Evolution, Design and Performance: Covers thermodynamics principles and establishes performance and evolution as fundamental concepts in thermal sciences Demonstrates how principles of physics predict a future with economies of scale, multi-scale design, vascularization, and hierarchical distribution of many small features Explores new work on conduction architecture, convection with nanofluids, boiling and condensation on designed surfaces, and resonance of natural circulation in enclosures Includes numerous examples, problems with solutions, and access to a companion website Heat Transfer: Evolution, Design and Performance is essential reading for undergraduate and graduate students in mechanical and chemical engineering, and for all engineers, physicists, biologists, and earth scientists.

Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants. Presents a thematic and comprehensive discussion on each aspect of CFD applications for the design and safety assessment of nuclear reactors Provides an historical review of the development of CFD models, discusses state-of-the-art concepts, and takes an applied and analytic look toward the future Includes CFD tools and simulations to advise and guide the reader through enhancing cost effectiveness, safety and performance optimization

Download or read book Heat Pipe Applications in Fission Driven Nuclear Power Plants written by Bahman Zohuri and published by Springer. This book was released on 2019-02-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new and innovative approach for the use of heat pipes and their application in a number of industrial scenarios, including space and nuclear power plants. The book opens by describing the heat pipe and its concept, including sizing, composition and binding energies. It contains mathematical models of high and low temperature pipes along with extensive design and manufacturing models, characteristics and testing programs. A detailed design and safety analysis concludes the book, emphasizing the importance of heat pipe implementation within the main cooling system and within the core of the reactor, making this book a useful resource for students, engineers, and researchers.

Download or read book Thermal Computations for Electronics written by Gordon N. Ellison and published by CRC Press. This book was released on 2020-05-13 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Thermal Computations for Electronics: Conductive, Radiative, and Convective Air Cooling was based on the author's lecture notes that he developed over the course of nearly 40 years of thermal design and analysis activity, the last 15 years of which included teaching a university course at the senior undergraduate and graduate levels. The subject material was developed from publications of respected researchers and includes topics and methods original to this author. Numerous students have contributed to both the first and second editions, the latter corrected, sections rewritten (e.g., radiation spatial effects, Green's function properties for thermal spreading, 1-D FEA theory and application), and some new material added. The flavor and organization of the first edition have been retained, whereby the reader is guided through the analysis process for systems and then components. Important new material has been added regarding altitude effects on forced and buoyancy driven airflow and heat transfer. The first 20% of the book is devoted to the prediction of airflow and well-mixed air temperatures in systems, circuit board channels, and heat sinks, followed by convective (PCB-mounted components included), radiative, and conductive heat transfer and the resultant temperatures in electronic equipment. Detailed application examples illustrate a variety of problems. Downloads (from the CRC website) include: MathcadTM text examples, exercise solutions (adopting professors only) plus PDF lecture aids (professors only), and a tutorial (Chapter 14) using free FEA software to solve a thermal spreading problem. This book is a valuable professional resource for self-study and is ideal for use in a course on electronics cooling. It is well-suited for a first course in heat transfer where applications are as important as theory.

Download or read book Fluid Fuel Reactors written by H. G. MacPherson and published by . This book was released on 1958 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Micro Reactors written by Bahman Zohuri and published by Springer Nature. This book was released on 2020-06-08 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at Generation IV (GEN IV) nuclear reactor design and the technology known as nuclear micro reactors that is currently under development. Coverage includes the advantages of nuclear micro reactor applications as sources of renewable energy, their use in military applications and Department of Defense requirements, and the nuclear industry’s trend toward the design of small and micro reactors. Nuclear micro reactor safety, security issues, and cost concerns are also explored. The book will provide scientists, engineers, and students with valuable guidance on the fundamentals needed to understand the research and development of the next generation of nuclear technologies.

Download or read book Lessons Learned from the Fukushima Nuclear Accident for Improving Safety of U S Nuclear Plants written by National Research Council (U.S.). Committee on Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants and published by National Academy Press. This book was released on 2014-10-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The March 11, 2011, Great East Japan Earthquake and tsunami sparked a humanitarian disaster in northeastern Japan. They were responsible for more than 15,900 deaths and 2,600 missing persons as well as physical infrastructure damages exceeding $200 billion. The earthquake and tsunami also initiated a severe nuclear accident at the Fukushima Daiichi Nuclear Power Station. Three of the six reactors at the plant sustained severe core damage and released hydrogen and radioactive materials. Explosion of the released hydrogen damaged three reactor buildings and impeded onsite emergency response efforts. The accident prompted widespread evacuations of local populations, large economic losses, and the eventual shutdown of all nuclear power plants in Japan. "Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants" is a study of the Fukushima Daiichi accident. This report examines the causes of the crisis, the performance of safety systems at the plant, and the responses of its operators following the earthquake and tsunami. The report then considers the lessons that can be learned and their implications for U.S. safety and storage of spent nuclear fuel and high-level waste, commercial nuclear reactor safety and security regulations, and design improvements. "Lessons Learned" makes recommendations to improve plant systems, resources, and operator training to enable effective ad hoc responses to severe accidents. This report's recommendations to incorporate modern risk concepts into safety regulations and improve the nuclear safety culture will help the industry prepare for events that could challenge the design of plant structures and lead to a loss of critical safety functions. In providing a broad-scope, high-level examination of the accident, "Lessons Learned" is meant to complement earlier evaluations by industry and regulators. This in-depth review will be an essential resource for the nuclear power industry, policy makers, and anyone interested in the state of U.S. preparedness and response in the face of crisis situations.

Download or read book Design of the Reactor Core for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication makes recommendations concerning safety features for incorporation into the design of the reactor core for a nuclear power plant, taking account of recent developments in the design of the reactor core and including guidance on general and specific design considerations. It supersedes IAEA Safety Series No. 50-SG-D14.

Download or read book Climate Change and the Role of Nuclear Power written by International Atomic Energy Agency and published by . This book was released on 2020-11-30 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: To address the challenges posed by climate change, and to achieve the goals established in the 2015 Paris Agreement, nuclear power has been identified to have great potential to contribute to the 1.5°C climate change mitigation target. This topical conference on climate change and the role of nuclear power, the first of its kind, served as a unique forum for exchanging science-based information on the role of nuclear power in supporting the low carbon energy transformation and for conducting objective discussions on the opportunities and challenges of safe, secure and safeguarded nuclear technology development. The major themes of the conference covered energy and climate change policies, implications for the power sector, environmental perspectives and potential roles of existing, evolutionary and innovative nuclear power systems, including the integration of nuclear/renewable energy systems. In addition to nuclear power's interim and long term contributions, some strategic and cross-cutting issues relating to public perception, regulations, markets and finance were also addressed. These proceedings provide a summary of the different plenary, technical and side event sessions as well as the full text of the speeches delivered in the opening, closing and high-level plenary sessions of the conference.