Download or read book Metal Forming Interrelation Between Theory and Practice written by A. L. Hoffmanner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Tools for Deformation Processes written by T. Z. Blazynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the problem of tool design - involving both the selection of suitable geometry and material- has exercised the attention of metal forming engineers for as long as this industrial activity has existed, the approach to its solution has been generally that of the 'trial and error' variety. It is only relatively recently that the continuing expansion of the bulk metal-forming industry, combined with an increase in the degree of sophistication required of its products and processes, has focussed attention on the problem of optimisation of tool design. This, in turn, produced a considerable expansion of theoretical and practical investi gations of the existing methods, techniques r,nd concepts, and helped to systematise our thinking and ideas in this area of engineering activity. In the virtual absence, so far, of a single, encyclopaedic, but sufficien tly deep, summation of the state of the art, a group of engineers and materials scientists felt that an opportune moment had arrived to try and produce, concisely, answers to many tool designers' dilemmas. This book attempts to set, in perspective, the existing - and proven - concepts of design, to show their respective advantages and weaknesses and to indicate how they should be applied to the individual main forming processes of rolling, drawing, extrusion and forging.
Download or read book Manufacturing Solutions Based on Engineering Sciences written by American Society of Mechanical Engineers. Winter Meeting and published by . This book was released on 1981 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Plasticity written by Jagabandhu Chakrabarty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline forged and shaped by the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others . The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of c- centrations important to mechanical engineering graduate education and research . We are fortunate to have a distinguished roster of consulting editors on the ad- sory board, each an expert in one of the areas of concentration . The names of the consulting editors are listed on the facing page of this volume . The areas of conc- tration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics , mechanics of materials, processing, production systems, thermal science, and tribology .
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Cumulative Index to Transactions of the ASME written by American Society of Mechanical Engineers and published by . This book was released on 1971 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indexes the journals which continue American Society of Mechanical Engineers. Transactions. and which are also called: Series A- of the Transactions of the American Society of Mechanical Engineers.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Forming and Impact Mechanics written by S. R. Reid and published by Elsevier. This book was released on 2016-07-29 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Forming and Impact Mechanics reviews significant developments concerning the mechanics of metal forming and impact. Topics covered include the kinematics of steady plane flows in elastoplastic media; contact zone and friction coefficient in hot-rolling; and plastic deformation of porous materials. Developments in the use of superplastic alloys, the use of metal tubes as impact energy absorbers, and fracturing of explosively loaded solids are also discussed. This book has 18 chapters divided equally between the broad headings of metal forming and impact mechanics. The section on metal forming mechanics includes papers that explore an upper bound approach to metal forming processes; rotary forming of rings under kinematic constraints; and microcomputer programs for rolling and extrolling. The section on impact mechanics examines the use of elementary approximation techniques to study plastic deformation in pulse loaded structures; static and dynamic axial crushing of circular and square tubes; and shear-control fragmentation of explosively loaded steel cylinders. This monograph will be of value to structural and mechanical engineers, metallurgists, and materials scientists and technologists, as well as to those active in the field of solid mechanics.
Download or read book Advances in Continuum Mechanics written by Otto Brüller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognized authors contributed to this collection of original papers from all fields of research in continuum mechanics. Special emphasis is given to time dependent and independent permanent deformations, damage and fracture. Part of the contributions is dedicated to current efforts in describing material behavior with regard to, e.g., anisotropy, thermal effects, softening, ductile and brittle fracture, porosity and granular structure. Another part deals with numerical aspects arising from the implementation of material laws in the calculations of forming processes, soil mechanics and structural mechanics. Applications of theory and numerical methods belong to the following areas: Comparison with experimental results from material testing, metal forming under thermal and dynamic conditions, failure by damage, fracture and localized deformation modes. The variety of treated topics provides a survery of the actual research in these fields; therefore, the book is addressed to those interested in special problems of continuum mechanics as well as to those interested in a general knowledge.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings North American Metalworking Research Conference written by and published by . This book was released on 1976 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supercollider 3 written by J. Nonte and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third annual International Industrialization Symposium on the SuperCollider, IISSC-held March 13-15, 1991, in Atlanta, Ga.-was an enormous success. The number of attendees, exhibitors, and representatives from foreign countries surpassed the totals of previous years. There were 740 attendees, representing more than 2 dozen universities and colleges, 32 states, 9 national labs, 6 research centers, several government entities at the local, state, and federal level, 182 businesses & industry and 14 countries. More than 100 exhibits, sponsored by 85 organizations, added to the excitement. "Getting Down to Business" was the theme of this year's Symposium. The fact that the Superconducting SuperCollider (SSC) is indeed underway was the message delivered by the Symposium's keynote speaker, Dr. Roy Schwitters, and expanded upon by the opening plenary speakers. The project is moving from the planning stage to actual construction, to development and procurement of equipment, and to resolution of the technical issues involved in advancing the state-of-the-art in areas such as theory, controls, systems, metallurgy, quality control, management, cryogenics, power systems, detectors, interagency cooperation and funding. Plenary speakers included: Paul Gilbert, Chairman of Parsons Brinckerhoff Quade & Douglas, Inc.
Download or read book Singular Solutions in Plasticity written by Sergei Alexandrov and published by Springer. This book was released on 2017-07-12 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with singular solutions that appear in the vicinity of maximum friction surfaces for several rigid plastic models. In particular, it discusses precise asymptotic expansions as a necessary ingredient for the development of efficient numerical methods to solve boundary value problems that involve the maximum friction law as a boundary condition. An applied aspect of the singular solutions considered is that these solutions are capable of predicting the development of narrow hard layers near frictional interfaces in manufacturing processes.
Download or read book Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques written by Vadim Silberschmidt and published by Elsevier. This book was released on 2020-04-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques provides a detailed overview of the latest developments in the mechanics of modern metal forming manufacturing. Focused on mechanics as opposed to process, it looks at the mechanical behavior of materials exposed to loading and environmental conditions related to modern manufacturing processes, covering deformation as well as damage and fracture processes. The book progresses from forming to machining and surface-treatment processes, and concludes with a series of chapters looking at recent and emerging technologies. Other topics covered include simulations in autofrettage processes, modeling strategies related to cutting simulations, residual stress caused by high thermomechanical gradients and pultrusion, as well as the mechanics of the curing process, forging, and cold spraying, among others. Some non-metallic materials, such as ceramics and composites, are covered as well. - Synthesizes the latest research in the mechanics of modern metal forming processes - Suggests theoretical models and numerical codes to predict mechanical responses - Covers mechanics of shot peening, pultrusion, hydroforming, magnetic pulse forming - Considers applicability of different materials and processes for optimum performance
Download or read book A S M Review of Metal Literature written by American Society for Metals and published by . This book was released on 1967 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Engineering for Industry written by and published by . This book was released on 1996 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
