Download or read book Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2008 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the bestselling books in the field, Introduction to Fluid Mechanics continues to provide readers with a balanced and comprehensive approach to mastering critical concepts. The new seventh edition once again incorporates a proven problem-solving methodology that will help them develop an orderly plan to finding the right solution. It starts with basic equations, then clearly states assumptions, and finally, relates results to expected physical behavior. Many of the steps involved in analysis are simplified by using Excel.
Download or read book Analysis and Control of Unsteady Flow in Pipelines written by Gary Z. Watters and published by Butterworth-Heinemann. This book was released on 1984 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Machinery and Fluid Mechanics written by Jianzhong Xu and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.
Download or read book An Introduction to Fluid Mechanics and Heat Transfer written by J. M. Kay and published by Cambridge University Press. This book was released on 1975-01-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1975 as the third edition of a 1957 original, this book presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. These ideas are subsequently developed in terms of their important practical applications, such as flow in pipes and channels, pumps, compressors and heat exchangers. Later chapters deal with the equation of fluid motion, turbulence and the general equations of forced convection. The final section discusses special problems in process engineering, including compressible flow in pipes, solid particles in fluid flow, flow through packed beds, condensation and evaporation. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.
Download or read book Fluid Mechanics And Machinery written by Durgaiah D. Rama and published by New Age International. This book was released on 2007 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Presents A Thorough And Comprehensive Treatment Of Both The Basic As Well As The More Advanced Concepts In Fluid Mechanics. The Entire Range Of Topics Comprising Fluid Mechanics Has Been Systematically Organised And The Various Concepts Are Clearly Explained With The Help Of Several Solved Examples.Apart From The Fundamental Concepts, The Book Also Explains Fluid Dynamics, Flow Measurement, Turbulent And Open Channel Flows And Dimensional And Model Analysis. Boundary Layer Flows And Compressible Fluid Flows Have Been Suitably Highlighted.Turbines, Pumps And Other Hydraulic Systems Including Circuits, Valves, Motors And Ram Have Also Been Explained. The Book Provides 225 Fully Worked Out Examples And More Than 1600 Questions Including Numerical Problems And Objective Questions. The Book Would Serve As An Exhaustive Text For Both Undergraduate And Post- Graduate Students Of Mechanical, Civil And Chemical Engineering. Amie And Competitive Examination Candidates As Well As Practising Engineers Would Also Find This Book Very Useful.
Download or read book Fluid Mechanics and Machinery written by Dr.P.Maniiarasan and published by RK Publication. This book was released on 2024-09-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Mechanics and Machinery is a comprehensive exploration of the principles governing fluid behavior and the machinery utilized in fluid systems. Fundamental concepts of fluid mechanics, including fluid properties, dynamics, and statics, while also delving into the design, operation, and analysis of various fluid machinery such as pumps, turbines, and compressors. Through detailed illustrations and real-world applications, it equips readers with a solid understanding of fluid dynamics and the engineering practices necessary for effective fluid management in diverse industrial contexts.
Download or read book Unsteady Flow in Open Channels written by Jurjen A. Battjes and published by Cambridge University Press. This book was released on 2017-02-16 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practitioners in water engineering rely on a thorough understanding of shallow water flows in order to safeguard our habitat, while at the same time sustaining the water environment. This book proposes a unified theoretical framework for the different types of shallow flow, providing a coherent approach to interpret the behaviour of such flows, and highlighting the similarities and differences. Every major topic in the book is accompanied by worked examples illustrating the theoretical concepts. Practical examples, showcasing inspiring research and engineering applications from the past and present, provide insight into how the theory developed. The book is also supplemented by a range of online resources, available at www.cambridge.org/battjes, including problem sets and computer codes. A solutions manual is available for instructors. This book is intended for students and professionals working in environmental water systems, in areas such as coasts, rivers, harbours, drainage, and irrigation canals.
Download or read book Analysis and Modelling of Non Steady Flow in Pipe and Channel Networks written by Vinko Jovic and published by John Wiley & Sons. This book was released on 2013-03-08 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks deals with flows in pipes and channel networks from the standpoints of hydraulics and modelling techniques and methods. These engineering problems occur in the course of the design and construction of hydroenergy plants, water-supply and other systems. In this book, the author presents his experience in solving these problems from the early 1970s to the present day. During this period new methods of solving hydraulic problems have evolved, due to the development of computers and numerical methods. This book is accompanied by a website which hosts the author's software package, Simpip (an abbreviation of simulation of pipe flow) for solving non-steady pipe flow using the finite element method. The program also covers flows in channels. The book presents the numerical core of the SimpipCore program (written in Fortran). Key features: Presents the theory and practice of modelling different flows in hydraulic networks Takes a systematic approach and addresses the topic from the fundamentals Presents numerical solutions based on finite element analysis Accompanied by a website hosting supporting material including the SimpipCore project as a standalone program Analysis and Modelling of Non-Steady Flow in Pipe and Channel Networks is an ideal reference book for engineers, practitioners and graduate students across engineering disciplines.
Download or read book Fluid Mechanics for Engineers written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2010-03-27 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.
Download or read book A General Theory of Fluid Mechanics written by Peiqing Liu and published by Springer Nature. This book was released on 2021-04-01 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general introduction to fluid mechanics in the form of biographies and popular science. Based on the author’s extensive teaching experience, it combines natural science and human history, knowledge inheritance and cognition law to replace abstract concepts of fluid mechanics with intuitive and understandable physical concepts. In seven chapters, it describes the development of fluid mechanics, aerodynamics, hydrodynamics, computational fluid dynamics, experimental fluid dynamics, wind tunnel and water tunnel equipment, the mystery of flight and aerodynamic principles, and leading figures in fluid mechanics in order to spark beginners’ interest and allow them to gain a comprehensive understanding of the field’s development. It also provides a list of references for further study.
Download or read book Engineering Fluid Mechanics written by Hongqing Song and published by Springer. This book was released on 2018-05-08 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces engineering fluid mechanics in a simple and understandable way, focusing on the basic concepts, principles and methods. Engineering fluid mechanics is necessary for professionals and students in fields such as civil, environmental, mechanical, and petroleum engineering. Unlike most of the current textbooks and monographs, which are too complicated and include huge numbers of math formulas and equations, this book introduces essential concepts and flow rules in a clear and elementary way that can be used in further research. In addition, it provides numerous useful tables and diagrams that can be quickly and directly checked for industry applications. Furthermore, it highlights the connection between free flow and porous flow, which can aid advanced interdisciplinary research such as nanotech and environmental science. Last but not least, each chapter presents a variety of problems to offer readers a better understanding about the principles and applications of fluid mechanics.
Download or read book Fluid Machinery written by Terry Wright and published by CRC Press. This book was released on 2009-12-16 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published nearly a decade ago, Fluid Machinery: Performance, Analysis, and Design quickly became popular with students, professors, and professionals because of its comprehensive and comprehensible introduction to the fluid mechanics of turbomachinery. Renamed to reflect its wider scope and reorganized content, this second edition provides a more logical flow of information that will enhance understanding. In particular, it presents a consistent notation within and across chapters, updating material when appropriate. Although the authors do account for the astounding growth in the field of computational fluid dynamics that has occurred since publication of the first edition, this text emphasizes traditional "one-dimensional" layout and points the way toward using CFD for turbomachinery design and analysis. Presents Extensive Examples and Design Exercises to Illustrate Performance Parameters and Machine Geometry By focusing on the preliminary design and selection of equipment to meet performance specifications, the authors promote a basic yet thorough understanding of the subject. They cover topics including gas and hydraulic turbines and equipment that is widely used in the industry, such as compressors, blowers, fans, and pumps. This book promotes a pragmatic approach to turbomachinery application and design, examining a realistic array of difficulties and conflicting requirements. The authors use examples from a broad range of industrial applications to illustrate the generality of the basic design approach and the common ground of seemingly diverse areas of application. With a variety of illustrations, examples, and exercises that emphasize real-world industrial applications, this book not only prepares students to face industrial applications with confidence, but also supplies professionals with a compact and easy-to-use reference.
Download or read book An Introduction to Fluid Mechanics written by Faith A. Morrison and published by Cambridge University Press. This book was released on 2013-04-15 with total page 945 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Why Study Fluid Mechanics? 1.1 Getting Motivated Flows are beautiful and complex. A swollen creek tumbles over rocks and through crevasses, swirling and foaming. A child plays with sticky tafy, stretching and reshaping the candy as she pulls it and twist it in various ways. Both the water and the tafy are fluids, and their motions are governed by the laws of nature. Our goal is to introduce the reader to the analysis of flows using the laws of physics and the language of mathematics. On mastering this material, the reader becomes able to harness flow to practical ends or to create beauty through fluid design. In this text we delve deeply into the mathematical analysis of flows, but before beginning, it is reasonable to ask if it is necessary to make this significant mathematical effort. After all, we can appreciate a flowing stream without understanding why it behaves as it does. We can also operate machines that rely on fluid behavior - drive a car for exam- 15 behavior? mathematical analysis. ple - without understanding the fluid dynamics of the engine, and we can even repair and maintain engines, piping networks, and other complex systems without having studied the mathematics of flow What is the purpose, then, of learning to mathematically describe fluid The answer to this question is quite practical: knowing the patterns fluids form and why they are formed, and knowing the stresses fluids generate and why they are generated is essential to designing and optimizing modern systems and devices. While the ancients designed wells and irrigation systems without calculations, we can avoid the wastefulness and tediousness of the trial-and-error process by using mathematical models"--
Download or read book Fluid Mechanics written by Robert A. Granger and published by Courier Corporation. This book was released on 2012-09-06 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structured introduction covers everything the engineer needs to know: nature of fluids, hydrostatics, differential and integral relations, dimensional analysis, viscous flows, more. Solutions to selected problems. 760 illustrations. 1985 edition.
Download or read book Biology and Mechanics of Blood Flows written by Marc Thiriet and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book presents the basic knowledge and state-of-the-art techniques necessary to carry out investigations of the cardiovascular system using modeling and simulation. This volume contains chapters on anatomy, physiology, continuum mechanics, as well as pathological changes in the vasculature walls including the heart and their treatments. Methods of numerical simulations are given and illustrated in particular by application to wall diseases.
Download or read book A Brief Introduction to Fluid Mechanics written by Donald F. Young and published by John Wiley & Sons. This book was released on 2010-12-21 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Brief Introduction to Fluid Mechanics, 5th Edition is designed to cover the standard topics in a basic fluid mechanics course in a streamlined manner that meets the learning needs of today?s student better than the dense, encyclopedic manner of traditional texts. This approach helps students connect the math and theory to the physical world and practical applications and apply these connections to solving problems. The text lucidly presents basic analysis techniques and addresses practical concerns and applications, such as pipe flow, open-channel flow, flow measurement, and drag and lift. It offers a strong visual approach with photos, illustrations, and videos included in the text, examples and homework problems to emphasize the practical application of fluid mechanics principles
Download or read book 2500 Solved Problems in Fluid Mechanics and Hydraulics written by Jack B. Evett and published by . This book was released on 1994 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt:
