Download or read book Steel Design 1 written by H. H. Snijder and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and variable actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and deformations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.
Download or read book Design of Plated Structures written by Darko Beg and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.
Download or read book Fire Design of Steel Structures written by Jean-Marc Franssen and published by John Wiley & Sons. This book was released on 2016-10-10 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and illustrates the rules that are given in the Eurocodes for designing steel structures subjected to fire. After the first introductory chapter, Chapter 2 explains how to calculate the mechanical actions (loads) in the fire situation based on the information given in EN 1990 and EN 1991. Chapter 3 is dedicated to the models which represent the thermal actions created by the fire. Chapter 4 describes the procedures to be used to calculate the temperature of the steelwork from the temperature of the compartment and Chapter 5 shows how the information given in EN 1993-1-2 is used to determine the load bearing capacity of the steel structure. Chapter 6 presents the essential features that characterize the advanced calculation models, for thermal and mechanical response. The methods used to evaluate the fire resistance of bolted and welded connections are described in Chapter 7. Chapter 8 describes a computer program called `Elefir-EN? which is based on the simple calculation model given in the Eurocode and allows designers to quickly and accurately calculate the performance of steel components in the fire situation. Chapter 9 looks at the issues that a designer may be faced with when assessing the fire resistance of a complete building. This is done via a case study and addresses most of the concepts presented in the previous chapters. For this second edition the content has been revised and extended. The book contains some new sections, e.g. a comparison between the simple and the advanced calculation, as well as additional examples.
Download or read book Performance Based Fire Engineering of Structures written by Yong Wang and published by CRC Press. This book was released on 2012-06-22 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major events—notably the Broadgate fire in London, New York’s World Trade Center collapse, and the Windsor Tower fire in Madrid—as well as the enlightening studies at the Cardington fire research project have given international prominence to performance-based structural fire engineering. As a result, structural fire engineering has increasingly attracted the interest not only of fire and structural engineers but also of researchers and students. And studies in recent years have generated a vast number of findings. Performance-Based Fire Engineering of Structures summarizes the latest knowledge on performance-based approaches to structural fire engineering, enabling readers to critically assess research in the field. Whereas most recent books have been mainly concerned with dissemination of principles encapsulated in established codes of practice such as the Eurocodes, this work addresses in depth: Global structural behaviour and modelling Progressive collapse of structures in fire and the importance of connection robustness The integrity of compartmentation in fire Structural fire engineering under realistic fire conditions and its implications for material properties The limitations of research results and design methods The unexploited potential for advanced fire engineering design This authoritative book draws on the work of internationally active researchers who were core members of the European Network project’s COST C26 working group on fire resistance. It helps readers develop a thorough understanding of how to use advanced fire engineering design to improve structural safety and reduce construction costs.
Download or read book Research and Advanced Technology in Fire Safety written by Masahiro Yamazaki and published by Ed. Universidad de Cantabria. This book was released on 2017-10-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings include papers presented at the International Conference on “Research and Advanced Technology in Fire Safety” FireSafety 2017 which took place at University of Cantabria, Santander, Spain. During last decade, our research group organized several on-day events and, in this sense, the success of this conference is a tribute for that continued effort to exchange knowledge on this discipline between experts from all parts of the world. This congress represents an excellent “agora” for researchers and engineers to present and discuss new and innovative approaches. In addition, this event is a unique opportunity for Spanish-speaker scientific and technological community to receive them from top references. The need for expertise in this field is also increasing in this geographical context.
Download or read book Structural Analysis and Design to Prevent Disproportionate Collapse written by Feng Fu and published by CRC Press. This book was released on 2016-04-27 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard Guidance on Preventing Disproportionate CollapseDisproportionate collapse is a pressing issue in current design practice. Numerous causes are possible - especially forms of extreme loading, such as blast, fire, earthquake, or vehicle collisions. But it is the mechanism and its prevention which are of especial interest and concern.After the Wor
Download or read book Composite Construction in Steel and Concrete 9 written by Markus Knobloch and published by John Wiley & Sons. This book was released on 2024-09-03 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.
Download or read book Eurocode 3 Design of Steel Structures Part 4 1 Silos written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Recovery and Management written by Ajay and published by CRC Press. This book was released on 2023-05-16 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable development approaches cannot be met unless waste management is addressed as a priority. Waste Recovery and Management: An Approach Toward Sustainable Development Goals presents a comprehensive examination of environmental pollution and health hazards caused by differing types of waste, its recycling and other e-waste management strategies, and potential political and legal interventions. It also presents the available carbon-recycling methods and investigates how these might be applied to reinforce waste management in industrialized countries as well as developing and emerging economies. Each chapter includes valuable data and case studies that serve as practical guidance for academicians, researchers, and stakeholders for quantifying the impacts of waste, and for planning integrated solid waste collection and treatment systems, thereby working toward sustainability at a global level. Features: Covers both traditional and new technologies for identifying and categorizing the sources and nature of various types of waste Provides methods for the safe disposal of municipal solid wastes, plastic waste, bio-medical wastes, hazardous wastes, and e-wastes Explains practical measures to cover the broad spectrum of everyday applications of waste management for environmental sustainability Contains a focused discussion of the current scenario and future research directions for different types of waste in each chapter
Download or read book Catalogue de Timbres de France 2019 written by Spink Maury and published by Spink Books. This book was released on 2018-09-01 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: A catalogue made by collectors for collectors. This year the Spink Maury Catalogue, heir to the prestigious Maury, Ceres and Dallay catalogues, continues its work of research, compiled over generations of philately. It covers all French stamps from 1849 to the present day, offering hundreds of changes – with oddities, new varieties and discoveries presented, as always, in an exceptional way. Included in the new material is the continuation of the monographic studies, presenting a stamp per page with all varieties known until the First World War; a redesign of types Merson and Pasteur; and a specialised part devoted to Marianne de Beaujard, reviewed in depth. In addition the section on current usage stamps (TUC) is fully updated following feedback from our contributors and readers. France has one of the most beautiful philatelic legacies in the world, and we are pleased to be its modest ambassador to the numerous international readers who join us each year. “Layout and coverage are sumptuous … The trite phrase “mine of information” does not begin to do justice to this immense achievement. To any collector of France beyond the elementary stage, this would be a bargain at twice the official retail price … Highly recommended. ….an absolute must for collectors of French stamps…” Michael Round, Journal of the France & Colonies Philatelic Society
Download or read book Twenty Seventh International Congress on Large Dams Vingt Septi me Congr s International des Grands Barrages written by ICOLD CIGB and published by CRC Press. This book was released on 2022-05-25 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Committee on Large Dams (ICOLD) held its 27th International Congress in Marseille, France (12-19 November 2021). The proceedings of the congress focus on four main questions: 1. Reservoir sedimentation and sustainable development; 2. Safety and risk analysis; 3. Geology and dams, and 4. Small dams and levees. The book thoroughly discusses these questions and is indispensable for academics, engineers and professionals involved or interested in engineering, hydraulic engineering and related disciplines.
Download or read book Learner Support in Online Learning Environments written by Chrysta Pelissier and published by John Wiley & Sons. This book was released on 2019-07-30 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are at a crucial time for the production and dissemination of knowledge – one in which the scientific community is questioning the nature of the digital humanities. Within this context, Learner Support in Online Learning Environments proposes, by taking into consideration the notion of assistance in a learning context, an original method of positioning digital resources for teachers, students and researchers in the humanities and social sciences. Questioning existing theoretical frameworks and prototypes, learner support in digital environments is presented as both a process and a result integrating a variety of resources. Some of these resources already exist, some may be adapted from existing objects and still others have yet to be imagined. The end goal is to facilitate both independent and group-based learning activities.
Download or read book Collective Volume of Scientific Papers written by and published by . This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sharks Rays and Chimaeras written by Sarah L. Fowler and published by IUCN. This book was released on 2005 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cumulated Index Medicus written by and published by . This book was released on 1996 with total page 1328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plant Genetic Resources Newsletter written by Institut international des ressources phytogénétiques and published by Bioversity International. This book was released on 1991 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
