Download or read book Understanding the Deformation of Ceramic Materials at High Strain Rates written by David A. Hallam and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation of Ceramic Materials II written by Richard E. Tressler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume "Deformation of Ceramic Materials II" constitutes the proceedings of an international symposium held at The Pennsyl vania State University, University Park, PA on July 20, 21, and 22, 1983. It includes studies of semiconductors and minerals which are closely related to ceramic materials. The initial conference on this topic was held in 1974 at Penn State and the proceedings were published in the volume entitled "Deformation of Ceramic Materials." This conference emphasized the deformation behavior of crystals and po1ycrysta11ine and polyphase ceramics with internationally recognized authorities as keynote lecturers on the major subtopics. Several papers dealing with cavity nucleation and creep crack growth represent a major new research thrust in ceramics since the first conference. This collection of papers represents the state-of-the art of our understanding of the plastic deformation behavior of ceramics and the crystals of which they are composed. We are grateful for the suggestions of our International Advisory Committee .in recommending experts in their respective countries to participate. We are particularly grateful that the organizers of the previous Dislocation-Point Defect Interaction Workshops agreed to participate in the Penn State Symposium as an alternative at the suggestion of Prof. A. H. Heuer. We acknowledge the financial support of the National Science Foundation for this conference.
Download or read book Plastic Deformation of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Deformation of Ceramic Materials written by R. C. Bradt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of a Symposium on the Plastic Deformation of Ceramic Materials, held at The Pennsylvania State University, University Park, Pennsylvania, July 17, 18, and 19, 1974. The theme of this conference focused on single crystal and polycrystalline deformation processes in ceramic materials. The 31 contributed papers by 52 authors, present a current understand ing of the theory and application of deformation processes to the study and utilization of ceramic materials. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the United States Atomic Energy Commission, The National Science Foundation, and The College of Earth and Mineral Sciences of The Pennsylvania State University. Special acknowledgment is extended to Drs. Louis C. Ianniello and Paul K. Predecki of the AEC and NSF, respectively. Of course, the proceedings would not have been possible without the excellent cooperation of the authors in preparing their manuscripts. Special appreciation is extended to the professional organi zation services provided by the J. Orvis Keller Conference Center of The Pennsylvania State University. In particular, Mrs. Patricia Ewing should be acknowledged for her excellent program organization and planning. Finally, we also wish to thank our secretaries for the patience and help in bringing these Proceedings to press.
Download or read book Ceramics written by Dietrich Munz and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a description of the failure phenomena of ceramic materials under mechanical loading, the methods to determine their properties, and the principles for material selection. The book presents fracture mechanical and statistical principles and their application to describe the scatter of strength and lifetime, while special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour. XXXXXXX Neuer Text Describing how ceramic materials fracture and fail under mechanical loading, this book provides methods for determining the properties of ceramics, and gives criteria for selecting ceramic materials for particular applications. It also examines the fracture-mechanical and statistical principles and their use in understanding the strength and durability of ceramics. Special chapters are devoted to creep behavior, criteria for multiaxial failure, and behavior under thermal shock. Readers will gain insight into the design of reliable ceramic components.
Download or read book Dynamic Behavior of Materials Volume 1 written by Vijay Chalivendra and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
Download or read book Fracture Mechanics of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes, 9 and 10, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at the Japan Fine Ceramics Center, Nagoya, Japan on July 15, 16, 17, 1991. These proceedings constitute the fifth pair of volumes of a continuing series of conferences. Volumes 1 and 2 were from the 1973 symposium, volumes 3 and 4 from a 1977 symposium, and volumes 5 and 6 from a 1981 symposium all of which were held at The Pennsylvania State University. Volumes 7 and 8 are from the 1985 symposium which was held at the Virginia Polytechnic Institute and State University. The theme ofthis conference, as for the previous four, focused on the mechanical behavior ofceramic materials in terms of the characteristics ofcracks, particularly the roles which they assume in the fracture processes and mechanisms. The 82 contributed papers by over 150 authors and co-authors represent the current state of that field. They address many of the theoretical and practical problems ofinterest to those scientists and engineers concerned with brittle fracture.
Download or read book High Strain Rate Compression Testing of Ceramics and Ceramic Composites written by and published by . This book was released on 2005 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compressive deformation and failure behavior of ceramics and ceramic-metal composites for armor applications has been studied as a function of strain rate at Los Alamos National Laboratory since the late 1980s. High strain rate ((almost equal to)103 s−1) uniaxial compression loading can be achieved using the Kolsky-split-Hopkinson pressure bar (SHPB) technique, but special methods must be used to obtain valid strength results. This paper reviews these methods and the limitations of the Kolsky-SHPB technique for this class of materials. The Kolsky-split-Hopkinson pressure bar (Kolsky-SHPB) technique was originally developed to characterize the mechanical behavior of ductile materials such as metals and polymers where the results can be used to develop strain-rate and temperature-dependent constitutive behavior models that empirically describe macroscopic plastic flow. The flow behavior of metals and polymers is generally controlled by thermally-activated and rate-dependent dislocation motion or polymer chain motion in response to shear stresses. Conversely, the macroscopic mechanical behavior of dense, brittle, ceramic-based materials is dominated by elastic deformation terminated by rapid failure associated with the propagation of defects in the material in response to resolved tensile stresses. This behavior is usually characterized by a distribution of macroscopically measured failure strengths and strains. The basis for any strain-rate dependence observed in the failure strength must originate from rate-dependence in the damage and fracture process, since uniform, uniaxial elastic behavior is rate-independent (e.g. inertial effects on crack growth). The study of microscopic damage and fracture processes and their rate-dependence under dynamic loading conditions is a difficult experimental challenge that is not addressed in this paper. The purpose of this paper is to review the methods that have been developed at the Los Alamos National Laboratory to perform valid, uniaxial, dynamic compression experiments on brittle materials using the Kolsky-SHPB technique and to emphasize the limitations of this technique. Kolsky-SHPB results for several ceramic and ceramic-metal(cermet) materials of interest for armor applications have been measured and show little or no strain rate sensitivity compared to quasi-static compression results.
Download or read book Dynamic Response of Advanced Ceramics written by Ghatu Subhash and published by John Wiley & Sons. This book was released on 2021-05-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response of Advanced Ceramics Discover fundamental concepts and recent advances in experimental, analytical, and computational research into the dynamic behavior of ceramics In Dynamic Response of Advanced Ceramics, an accomplished team of internationally renowned researchers delivers a comprehensive exploration of foundational and advanced concepts in experimental, analytical, and computational aspects of the dynamic behavior of advanced structural ceramics and transparent materials. The book discusses new techniques used for determination of dynamic hardness and dynamic fracture toughness, as well as edge-on-impact experiments for imaging evolving damage patterns at high impact velocities. The authors also include descriptions of the dynamic deformation behavior of icosahedral ceramics and the dynamic behavior of several transparent materials, like chemically strengthened glass and glass ceramics. The developments discussed within the book have applications in everything from high-speed machining to cutting, grinding, and blast protection. Readers will also benefit from a presentation of emerging trends and directions in research on this subject as well as current challenges in experimental and computational domains, including: An introduction to the history of ceramic materials and their dynamic behavior, including examples of material response to high-strain-rate loading An exploration of high-strain-rate experimental techniques, like 1D elastic stress-wave propagation techniques, shock waves, and impact testing Discussions of the static and dynamic responses of ceramics and the shock response of brittle solids An overview of deformation mechanisms during projectile impact on a confined ceramic, including damage evolution during the nonpenetration and penetration phases. Perfect for researchers, scientists, and engineers working on ballistic impact and shock response of brittle materials, Dynamic Response of Advanced Ceramics will also earn a place in the libraries of industry personnel studying impact-resistant solutions for a variety of applications.
Download or read book Life Prediction Methodologies and Data for Ceramic Materials written by S. F. Duffy and published by ASTM International. This book was released on 1994 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Testing of Engineering Ceramics at High Temperatures written by B. F. Dyson and published by . This book was released on 1989 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Materials and Components for Energy and Environmental Applications written by Dongliang Jiang and published by John Wiley & Sons. This book was released on 2010-07-02 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Ceramic Transactions series compiles a number of papers presented at the 9th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (9th CMCEE) in Shanghai, China and was the continuation of a series of international conferences held all over the world over the last three decades. This volume contains selected peer reviewed papers from more than 300 presentations from all over the world. The papers in this volume also highlight and emphasize the importance of synergy between advanced materials and component designs.
Download or read book Mechanical and Thermal Properties of Ceramics written by J. B. Wachtman and published by . This book was released on 1969 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Wave and High Strain Rate Phenomena in Materials written by 0 Meyers, and published by CRC Press. This book was released on 2023-07-21 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of EXPLOMET 90, the International Conference on the Materials Effects of Shock-Wave and High-Strain-Rate Phenomena, held August 1990, in La Jolla, California, represent a global and up-to-date appraisal of this field. Contributions (more than 100) deal with high-strain-rate deforma
Download or read book Composite Materials written by R. Velmurugan and published by CRC Press. This book was released on 2023-12-05 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the recent advances in high strain rate testing, this book discusses techniques for designing, executing, analyzing, and interpreting the results of experiments involving the dynamic behavior of multifunctional materials such as metals, polymers, fiber-reinforced polymers, hybrid laminates and so forth. The book also discusses analytical and numerical modeling of materials under high-velocity impact loading and other environmental conditions. Recent advances in characterization techniques such as digital image correlation and computed tomography for high strain rate applications are included. Features Presents exclusive material on high-rate properties of fiber-reinforced composites Provides numerical techniques on the analysis and enriched data on the high strain rate behavior of materials Explores cutting-edge techniques and experimental guidelines for an array of different materials subjected to high strain rate loading Explains clear understanding of material behavior at various strain rates Reviews mechanical response of different materials at high strain rates This book is aimed at researchers and professionals in mechanical, materials, and aerospace engineering.
Download or read book Metallurgical Applications of Shock Wave and High Strain Rate Phenomena written by Murr and published by CRC Press. This book was released on 1986-06-06 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing metallurgical and materials applications of shock-wave and high-strain-rate phenomena, this superb volume presents the work of the leading international authorities who examine the state of the art of explosive and related technologies in the context of metallurgical and materials processing and fabrication.
