Download or read book Understanding and Applying Machine Vision Revised and Expanded written by Nello Zeuch and published by CRC Press. This book was released on 2000-01-03 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of applications of machine vision technology in the semiconductor, electronic, automotive, wood, food, pharmaceutical, printing, and container industries. It describes systems that enable projects to move forward swiftly and efficiently, and focuses on the nuances of the engineering and system integration of machine vision technology.
Download or read book Machine Vision written by Richard K. Miller and published by Springer Science & Business Media. This book was released on 1989-08-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at manufacturing managers and engineers looking for an introduction to computer vision and its potential, this book discusses the areas in which machine vision is being used, explains different types of machine vision hardware and software and summarizes research at several universities.
Download or read book Machine Vision written by Nello Zuech and published by . This book was released on 1989 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Vision written by E. R. Davies and published by Elsevier. This book was released on 2004-12-22 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 40 years, machine vision has evolved into a mature field embracing a wide range of applications including surveillance, automated inspection, robot assembly, vehicle guidance, traffic monitoring and control, signature verification, biometric measurement, and analysis of remotely sensed images. While researchers and industry specialists continue to document their work in this area, it has become increasingly difficult for professionals and graduate students to understand the essential theory and practicalities well enough to design their own algorithms and systems. This book directly addresses this need.As in earlier editions, E.R. Davies clearly and systematically presents the basic concepts of the field in highly accessible prose and images, covering essential elements of the theory while emphasizing algorithmic and practical design constraints. In this thoroughly updated edition, he divides the material into horizontal levels of a complete machine vision system. Application case studies demonstrate specific techniques and illustrate key constraints for designing real-world machine vision systems.· Includes solid, accessible coverage of 2-D and 3-D scene analysis.· Offers thorough treatment of the Hough Transform—a key technique for inspection and surveillance.· Brings vital topics and techniques together in an integrated system design approach.· Takes full account of the requirement for real-time processing in real applications.
Download or read book Machine Vision Algorithms and Applications written by Carsten Steger and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this successful machine vision textbook is completely updated, revised and expanded by 35% to reflect the developments of recent years in the fields of image acquisition, machine vision algorithms and applications. The new content includes, but is not limited to, a discussion of new camera and image acquisition interfaces, 3D sensors and technologies, 3D reconstruction, 3D object recognition and state-of-the-art classification algorithms. The authors retain their balanced approach with sufficient coverage of the theory and a strong focus on applications. All examples are based on the latest version of the machine vision software HALCON 13.
Download or read book Examining Optoelectronics in Machine Vision and Applications in Industry 4 0 written by Sergiyenko, Oleg and published by IGI Global. This book was released on 2021-02-12 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research and exploitation of optoelectronic properties in the industrial branch of electronics is becoming more popular each day due to the important role they play in the development of a large variety of sensors, devices, and systems for identifying, measuring, and constructing. While optoelectronics study the applications of electronic devices that source, detect, and transform light, machine vision generates and detects light in order to provide imaging-based automatic inspections and analysis for such applications as automatic object and environmental inspection, process control, and robot/mobile machine guidance in industry. Machine vision is less efficient without optoelectronics, and thus, it is important to investigate the theoretical approaches to different optoelectronic devices available for machine vision as well as current scanning technologies. Examining Optoelectronics in Machine Vision and Applications in Industry 4.0 focuses on the examination of emerging technologies for the design, fabrication, and implementation of optoelectronic sensors, devices, and systems in a machine vision approach to support industrial, commercial, and scientific applications. The book covers topics such as the design, fabrication, and implementation of sensors and devices as well as the development viewpoint of optoelectronic systems and artificial vision techniques using optoelectronic devices. The interaction and informational communication between all these mentioned devices in the complex solution of the same task is the subject of modern challenges in Industry 4.0. Thus, this book supports engineers, technology developers, academicians, researchers, and students who seek machine vision techniques for detection, measurement, and 3D reconstruction.
Download or read book Handbook of Machine and Computer Vision written by Alexander Hornberg and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this accepted reference work has been updated to reflect the rapid developments in the field and now covers both 2D and 3D imaging. Written by expert practitioners from leading companies operating in machine vision, this one-stop handbook guides readers through all aspects of image acquisition and image processing, including optics, electronics and software. The authors approach the subject in terms of industrial applications, elucidating such topics as illumination and camera calibration. Initial chapters concentrate on the latest hardware aspects, ranging from lenses and camera systems to camera-computer interfaces, with the software necessary discussed to an equal depth in later sections. These include digital image basics as well as image analysis and image processing. The book concludes with extended coverage of industrial applications in optics and electronics, backed by case studies and design strategies for the conception of complete machine vision systems. As a result, readers are not only able to understand the latest systems, but also to plan and evaluate this technology. With more than 500 images and tables to illustrate relevant principles and steps.
Download or read book Handbook of Induction Heating written by Valery Rudnev and published by CRC Press. This book was released on 2002-12-17 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering ready-to-use tables, diagrams, graphs, and simplified formulas for at-a-glance guidance in induction heating system design, this book contains numerous photographs, magnetic field plots, temperature profiles, case studies, hands-on guidelines, and practical recommendations to navigate through various system designs and avoid surprises in installation, operation, and maintenance. It covers basic principles, modern design concepts, and advanced techniques engineers use to model and evaluate the different types of manufacturing processes based on heating by induction. The handbook explains the electromagnetic and heat transfer phenomena that take place during induction heating.
Download or read book Product Design for Manufacture and Assembly written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product
Download or read book Integrated Product Design and Manufacturing Using Geometric Dimensioning and Tolerancing written by Bob Campbell and published by CRC Press. This book was released on 2002-09-13 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the preparation and application of design layout analyses with concurrent engineering teams in six steps that capture design intent and add value to design process. It offers tools for eliminating costly trial-and-error approaches and deliver economically viable products. The authors discuss product design techniques that allevi
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Metallurgical Design of Flat Rolled Steels written by Vladimir B. Ginzburg and published by CRC Press. This book was released on 2020-11-25 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the basic principles of metallurgical design of flat rolled steels to obtain flat steel products with required metallurgical and mechanical properties. These principles establish the requirements for steel chemical composition and the process parameters, including steelmaking, reheating, hot rolling, annealing and cold rolling. Metallurgical Design of Flat Rolled Steels reviews the current theories and experimental works conducted in this area, and gives a comparative analysis of the obtained results in application to a large variety of steels produced around the world. This guide presents essential material in a fashion that permits rapid application to practical problems while providing the structure and understanding necessary for long-term growth. It first explains how the components fit and work together to make a successful experimental design, then analyzes each component in detail, presenting the various approaches in the form of menus of different strategies and options. Then the text illustrates equations developed by various researchers and compares them in both table and graphic forms. Written in a clear and concise manner, the material is presented using a modular or "building block" approach so readers get to see how the entire structure fits together and learn the essential techniques and terminology necessary to develop more complex designs and analyses.
Download or read book Coordinate Measuring Machines and Systems written by Robert J. Hocken and published by CRC Press. This book was released on 2016-04-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since John Bosch edited and published the first version of this book in 1995, the world of manufacturing and coordinate measuring machines (CMMs) and coordinate measuring systems (CMSs) has changed considerably. However, the basic physics of the machines has not changed in essence but have become more deeply understood. Completely revised and updat
Download or read book Rod and Bar Rolling written by Youngseog Lee and published by CRC Press. This book was released on 2004-06-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rod and Bar Rolling: Theory and Applications highlights the underlying relationship between solid mechanics and materials science. It provides a detailed overview of the deformation of material at high temperatures, an assessment of rod and bar rolling processes, and an in-depth review of the basics of hot rolling, elasticity, plasticity, and recry
Download or read book Re Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Download or read book Handbook of Lapping and Polishing written by Ioan D. Marinescu and published by CRC Press. This book was released on 2006-11-20 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lapping and polishing are currently the most precise surface finishing processes for mechanical and electronic components. Unfortunately, most improvements in either methods or understanding of the physical processes involved are closely guarded as proprietary information. The Handbook of Lapping and Polishing is the first source in English to brin
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniques, and assembly applications for clear illustration of manufacturing engineering technology in the modern age. Considers a variety of methods for product design including axiomatic design, design for X, group technology, and the Taguchi method, as well as modern production techniques including laser-beam machining, microlithography.
