Download or read book UML B Specification for Proven Embedded Systems Design written by Jean Mermet and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the perspective of the project on a Paradigm Unifying System Specification Environments for proven Electronic design (PUS SEE) as conceived in the course of the research during 2002 -2003. The initial statement of the research was formulated as follows: The objective of PUSSEE is to introduce the formal proof of system properties throughout a modular system design methodology that integrates sub-systems co-verification with system refinement and reusability of virtual system components. This will be done by combining the UML and B languages to allow the verification of system specifications through the composition of proven sub-systems (in particular interfaces, using the VSIAISLIF standard). The link of B with C, VHDL and SystemC will extend the correct-by-construction design process to lower system-on-chip (SoC) development stages. Prototype tools will be developed for the code generation from UML and B, and existing B verification tools will be extended to support IP reuse, according to the VSI Alliance work. The methodology and tools will be validated through the development of three industrial applications: a wireless mobile terminal-a telecom system-on-chip based on HIPERLANI2 protocol and an anti-collision module for automobiles. The problem was known to be hard and the scope ambitious. But the seventeen chapters that follow, describing the main results obtained demonstrate the success of the research, acknowledged by the European reviewers. They are released to allow the largest audience to learn and take benefit of.

Download or read book B 2007 Formal Specification and Development in B written by Jacques Julliand and published by Springer. This book was released on 2006-12-12 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference of B Users, B 2007, held in Besançon, France, January 2007. Coverage in this volume includes industrial applications and case studies using B, integration of model-based specification methods in the software development lifecycle, derivation of hardware-software architecture from model-based specifications, and validating requirements through formal models.

Download or read book Rigorous Development of Complex Fault Tolerant Systems written by Michael Butler and published by Springer. This book was released on 2006-11-23 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together 19 papers focusing on the application of rigorous design techniques to the development of fault-tolerant, software-based systems. It is an outcome of the REFT 2005 Workshop on Rigorous Engineering of Fault-Tolerant Systems held in conjunction with the Formal Methods 2005 conference at Newcastle upon Tyne, UK, in July 2005.

Download or read book ZB 2005 Formal Specification and Development in Z and B written by Helen Treharne and published by Springer. This book was released on 2005-04-25 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference of Z and B users, ZB 2005, held in Guildford, UK in April 2005. The 25 revised full papers presented together with extended abstracts of 2 invited papers were carefully reviewed and selected for inclusion in the book. The papers document the recent advances for the Z formal specification notation and for the B method, ranging from foundational, theoretical, and methodological issues to advanced applications, tools, and case studies.

Download or read book Theoretical Aspects of Computing ICTAC 2013 written by Zhiming Liu and published by Springer. This book was released on 2013-08-30 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Colloquium on Theoretical Aspects of Computing, ICTAC 2013 held in Macau, China, in September 2013. The 22 revised full papers presented together with three keynote talks were carefully reviewed and selected from 64 submissions. The papers cover various topics related to both theoretical aspects of computing and the exploitation of theory through methods and tools for system development.

Download or read book UML 2 Semantics and Applications written by Kevin Lano and published by John Wiley & Sons. This book was released on 2009-10-13 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: A coherent and integrated account of the leading UML 2 semantics work and the practical applications of UML semantics development With contributions from leading experts in the field, the book begins with an introduction to UML and goes on to offer in-depth and up-to-date coverage of: The role of semantics Considerations and rationale for a UML system model Definition of the UML system model UML descriptive semantics Axiomatic semantics of UML class diagrams The object constraint language Axiomatic semantics of state machines A coalgebraic semantic framework for reasoning about interaction designs Semantics of activity diagrams Verification of UML models State invariants Model transformation specification and verification Additionally, readers are provided with expert guidance on how to resolve semantic problems and a section on applications of UML semantics with model analysis. UML 2 Semantics and Applications is an ideal resource for researchers and tool-builders working in UML, among others. It is also an excellent textbook for postgraduate teaching and research.

Download or read book Handbook of Research on Software Engineering and Productivity Technologies Implications of Globalization written by Ramachandran, Muthu and published by IGI Global. This book was released on 2009-08-31 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides integrated chapters on software engineering and enterprise systems focusing on parts integrating requirements engineering, software engineering, process and frameworks, productivity technologies, and enterprise systems"--Provided by publisher.

Download or read book Innovations in Embedded and Real Time Systems Engineering for Communication written by Virtanen, Seppo and published by IGI Global. This book was released on 2012-04-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has collected the latest research within the field of real-time systems engineering, and will serve as a vital reference compendium for practitioners and academics"--Provided by publisher.

Download or read book Formal Methods and Software Engineering written by Michael Butler and published by Springer. This book was released on 2015-11-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Conference on Formal Engineering Methods, ICFEM 2015, held in Paris, France, in November 2015. The 27 revised full papers presented were carefully reviewed and selected from 82 submissions. The papers cover a wide range of topics in the area of formal methods and software engineering and are devoted to advancing the state of the art of applying formal methods in practice. They focus in particular on combinations of conceptual and methodological aspects with their formal foundation and tool support.

Download or read book Research Challenges in Information Science written by Renata Guizzardi and published by Springer Nature. This book was released on 2022-05-13 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 16th International Conference on Research Challenges in Information Sciences, RCIS 2022, which took place in Barcelona, Spain, during May 17–20, 2022. It focused on the special theme "Ethics and Trustworthiness in Information Science". The scope of RCIS is summarized by the thematic areas of information systems and their engineering; user-oriented approaches; data and information management; business process management; domain-specific information systems engineering; data science; information infrastructures, and reflective research and practice. The 35 full papers presented in this volume were carefully reviewed and selected from a total 100 submissions. The 18 Forum papers are based on 11 Forum submissions, from which 5 were selected, and the remaining 13 were transferred from the regular submissions. The 6 Doctoral Consortium papers were selected from 10 submissions to the consortium. The contributions were organized in topical sections named: Data Science and Data Management; Information Search and Analysis; Business Process Management; Business Process Mining; Digital Transformation and Smart Life; Conceptual Modelling and Ontologies; Requirements Engineering; Model-Driven Engineering; Machine Learning Applications. In addition, two-page summaries of the tutorials can be found in the back matter.

Download or read book Leveraging Applications of Formal Methods Verification and Validation Modeling written by Tiziana Margaria and published by Springer. This book was released on 2018-10-28 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 11244, 11245, 11246, and 11247 constitutes the refereed proceedings of the 8th International Symposium on Leveraging Applications of Formal Methods, Verification and Validation, ISoLA 2018, held in Limassol, Cyprus, in October/November 2018. The papers presented were carefully reviewed and selected for inclusion in the proceedings. Each volume focusses on an individual topic with topical section headings within the volume: Part I, Modeling: Towards a unified view of modeling and programming; X-by-construction, STRESS 2018. Part II, Verification: A broader view on verification: from static to runtime and back; evaluating tools for software verification; statistical model checking; RERS 2018; doctoral symposium. Part III, Distributed Systems: rigorous engineering of collective adaptive systems; verification and validation of distributed systems; and cyber-physical systems engineering. Part IV, Industrial Practice: runtime verification from the theory to the industry practice; formal methods in industrial practice - bridging the gap; reliable smart contracts: state-of-the-art, applications, challenges and future directions; and industrial day.

Download or read book Formal Methods and Software Engineering written by Karin Breitman and published by Springer. This book was released on 2009-11-18 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal methods for development of computer systems have been extensively studied over the years. A range of semantic theories, speci?cation languages, design techniques, and veri?cation methods and tools have been developed and applied to the construction of programs used in critical applications. The ch- lenge now is to scale up formal methods and integrate them into engineering - velopment processes for the correct and e?cient construction and maintenance of computer systems in general. This requires us to improve the state of the art on approaches and techniques for integration of formal methods into industrial engineering practice, including new and emerging practice. The now long-established series of International Conferences on Formal - gineering Methods brings together those interested in the application of formal engineering methods to computer systems. Researchers and practitioners, from industry, academia, and government, are encouraged to attend and to help - vance the state of the art. This volume contains the papers presented at ICFEM 2009, the 11th International Conference on Formal Engineering Methods, held during December 9–11, in Rio de Janeiro, Brazil.

Download or read book Formal Methods and Software Engineering written by Kung-Kiu Lau and published by Springer Science & Business Media. This book was released on 2005-10-27 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Formal Engineering Methods, ICFEM 2005, held in Manchester, UK in November 2005. The 30 revised full papers presented together with 3 invited contributions were carefully reviewed and selected from 74 submissions. The papers address all current issues in formal methods and their applications in software engineering. They are organized in topical sections on specification, modelling, security, communication, development, testing, verification, and tools.

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Stamatis Vassiliadis and published by Springer Science & Business Media. This book was released on 2006-07-06 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Workshop on Systems, Architectures, Modeling, and Simulation, SAMOS 2006, held in Samos, Greece on July 2006. The 47 revised full papers presented together with 2 keynote talks were thoroughly reviewed and selected from 130 submissions. The papers are organized in topical sections on system design and modeling, wireless sensor networks, processor design, dependable computing, architectures and implementations, and embedded sensor systems.

Download or read book UML B Specification for Proven Embedded Systems Design written by Jean Mermet and published by . This book was released on 2014-01-15 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book System Specification Design Languages written by Eugenio Villar and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this fourth book in the CHDL Series, a selection of the best papers presented in FDL'02 is published. System Specification and Design Languages contains outstanding research contributions in the four areas mentioned above. So, The Analog and Mixed-Signal system design contributions cover the new methodological approaches like AMS behavioral specification, mixed-signal modeling and simulation, AMS reuse and MEMs design using the new modeling languages such as VHDL-AMS, Verilog-AMS, Modelica and analog-mixed signal extensions to SystemC. UML is the de-facto standard for SW development covering the early development stages of requirement analysis and system specification. The UML-based system specification and design contributions address latest results on hot-topic areas such as system profiling, performance analysis and UML application to complex, HW/SW embedded systems and SoC design.C/C++-for HW/SW systems design is entering standard industrial design flows. Selected papers cover system modeling, system verification and SW generation. The papers from the Specification Formalisms for Proven design workshop present formal methods for system modeling and design, semantic integrity and formal languages such as ALPHA, HANDLE and B.

Download or read book Languages for System Specification written by Christoph Grimm and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions on UML address the application of UML in the specification of embedded HW/SW systems. C-Based System Design embraces the modeling of operating systems, modeling with different models of computation, generation of test patterns, and experiences from case studies with SystemC. Analog and Mixed-Signal Systems covers rules for solving general modeling problems in VHDL-AMS, modeling of multi-nature systems, synthesis, and modeling of Mixed-Signal Systems with SystemC. Languages for formal methods are addressed by contributions on formal specification and refinement of hybrid, embedded and real-time stems. Together with articles on new languages such as SystemVerilog and Software Engineering in Automotive Systems the contributions selected for this book embrace all aspects of languages and models for specification, design, modeling and verification of systems. Therefore, the book gives an excellent overview of the actual state-of-the-art and the latest research results.