Download or read book Ultraviolet Nanoimprint Lithography written by Elisabeth Lausecker and published by Sudwestdeutscher Verlag Fur Hochschulschriften AG. This book was released on 2012 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint lithography (NIL) is a lithographic technique that allows the patterning of substrates with nanostructures over large areas with high density. NIL relies on the simplicity of mechanically deforming a polymeric resist layer by a patterned mold. The author gives a detailed introduction to NIL and developed ultraviolet NIL for the pit-patterning of substrate surfaces. By combining the self-assembled growth of silicon-germanium (SiGe) islands by molecular-beam epitaxy with the pit-patterning of the Si substrate, an ordering of the islands is achieved. Both, a position-control of the SiGe islands and an improvement of their homogeneity and emission efficiency is accomplished. Moreover, the work towards integrating these ordered SiGe islands into a two-dimensional photonic crystal slab was pursued, demanding a second imprinted layer precisely aligned to the first one. Finally, self-aligned imprint lithography was developed at Princeton University, USA, for the fabrication of the first top-gate amorphous Si thin-film transistor. The book contains detailed descriptions of executed process steps.
Download or read book Ultraviolet Nanoimprint Lithography written by Elisabeth Lausecker and published by Sudwestdeutscher Verlag Fur Hochschulschriften AG. This book was released on 2012 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint lithography (NIL) is a lithographic technique that allows the patterning of substrates with nanostructures over large areas with high density. NIL relies on the simplicity of mechanically deforming a polymeric resist layer by a patterned mold. The author gives a detailed introduction to NIL and developed ultraviolet NIL for the pit-patterning of substrate surfaces. By combining the self-assembled growth of silicon-germanium (SiGe) islands by molecular-beam epitaxy with the pit-patterning of the Si substrate, an ordering of the islands is achieved. Both, a position-control of the SiGe islands and an improvement of their homogeneity and emission efficiency is accomplished. Moreover, the work towards integrating these ordered SiGe islands into a two-dimensional photonic crystal slab was pursued, demanding a second imprinted layer precisely aligned to the first one. Finally, self-aligned imprint lithography was developed at Princeton University, USA, for the fabrication of the first top-gate amorphous Si thin-film transistor. The book contains detailed descriptions of executed process steps.
Download or read book Ultraviolet nanoimprint lithography using flexible molds Process development and applications written by Namil Koo and published by . This book was released on 2012 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lithography written by Michael Wang and published by IntechOpen. This book was released on 2010-02-01 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, plays a critical role in micro- and nano-fabrications and the revolution in high density integrated circuits. This book is the result of inspirations and contributions from many researchers worldwide. Although the inclusion of the book chapters may not be a complete representation of all lithographic arts, it does represent a good collection of contributions in this field. We hope readers will enjoy reading the book as much as we have enjoyed bringing it together. We would like to thank all contributors and authors of this book.
Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2018-10-03 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from elementary concepts to advanced aspects of modern submicron microlithography. Each chapter reflects the current research and practices from the world's leading academic and industrial laboratories detailed by a stellar panel of international experts. New in the Second Edition In addition to updated information on existing material, this new edition features coverage of technologies developed over the last decade since the first edition appeared, including: Immersion Lithography 157nm Lithography Electron Projection Lithography (EPL) Extreme Ultraviolet (EUV) Lithography Imprint Lithography Photoresists for 193nm and Immersion Lithography Scatterometry Microlithography: Science and Technology, Second Edition authoritatively covers the physics, chemistry, optics, metrology tools and techniques, resist processing and materials, and fabrication methods involved in the latest generations of microlithography such as immersion lithography and extreme ultraviolet (EUV) lithography. It also looks ahead to the possible future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current literature, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to achieve robust, accurate, and cost-effective microlithography processes and systems.
Download or read book Nanocoatings and Ultra Thin Films written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2011-09-14 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are used for a wide range of applications, from anti-fogging coatings for glass through to corrosion control in the aerospace and automotive industries. Nanocoatings and ultra-thin films provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings. Part one covers technologies used in the creation and analysis of thin films, including chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films. Part two focuses on the applications of nanocoatings and ultra-thin films, with chapters covering topics such as nanocoatings for architectural glass, packaging applications, conventional and smart nanocoatings for corrosion protection in aerospace engineering and ultra-thin membranes for sensor applications. With its distinguished editors and international team of contributors, Nanocoatings and ultra-thin films is an essential reference for professional engineers in the glazing, consctruction, electronics and transport industries, as well as all those with an academic research interest in the field. Provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings Focuses on the applications of nanocoatings and ultra-thin films, covering topics such as nanocoatings for architectural glass, packaging applications and ultra-thin membranes for sensor applications Includes chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films
Download or read book Nanolithography written by M Feldman and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits, and devices fabricated using the techniques developed for integrated circuits, have steadily gotten smaller, more complex, and more powerful. The rate of shrinking is astonishing – some components are now just a few dozen atoms wide. This book attempts to answer the questions, “What comes next? and “How do we get there? Nanolithography outlines the present state of the art in lithographic techniques, including optical projection in both deep and extreme ultraviolet, electron and ion beams, and imprinting. Special attention is paid to related issues, such as the resists used in lithography, the masks (or lack thereof), the metrology needed for nano-features, modeling, and the limitations caused by feature edge roughness. In addition emerging technologies are described, including the directed assembly of wafer features, nanostructures and devices, nano-photonics, and nano-fluidics. This book is intended as a guide to the researcher new to this field, reading related journals or facing the complexities of a technical conference. Its goal is to give enough background information to enable such a researcher to understand, and appreciate, new developments in nanolithography, and to go on to make advances of his/her own. Outlines the current state of the art in alternative nanolithography technologies in order to cope with the future reduction in size of semiconductor chips to nanoscale dimensions Covers lithographic techniques, including optical projection, extreme ultraviolet (EUV), nanoimprint, electron beam and ion beam lithography Describes the emerging applications of nanolithography in nanoelectronics, nanophotonics and microfluidics
Download or read book On UV Nanoimprint Lithography as Direct Patterning Tool for Polymeric Microsystems written by Robert Kirchner and published by . This book was released on 2012 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoimprint Lithography written by Hongbo Lan and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, has been playing a critical role in micro-nanofabrication technologies and manufacturing of Integrated Circuits (IC). Traditional optical lithography including contact and project photolithography has contributed significantly to the semiconductor device advancements. Currently, maintaining the rapid pace of half-pitch reduction requires overcoming the challenge of improving and extending the incumbent optical projection lithography technology while simultaneously developing alternative, next generation lithography (NGL) technologies to be used when optical projection lithography is no longer more economical than the alternatives. Furthermore, NIL is also one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures as this highly technical book will give new insight to.
Download or read book Micro Nanolithography written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to give proficient people a comprehensive review of up-to-date global improvements in hypothetical and experimental evidences, perspectives and prospects of some newsworthy instrumentation and its numerous technological applications for a wide range of lithographic fabrication techniques. The present theme of this book is concomitant with the lithographic ways and means of deposition, optimization parameters and their wide technological applications. This book consists of six chapters comprehending with eminence of lithography, fabrication and reproduction of periodic nanopyramid structures using UV nanoimprint lithography for solar cell applications, large-area nanoimprint lithography and applications, micro-/nanopatterning on polymers, OPC under immersion lithography associated to novel luminescence applications, achromatic Talbot lithography (ATL) and the soft X-ray interference lithography. Individual chapters provide a base for a wide range of readers from different fiels, students and researchers, who may be doing research pertinent to the topics discussed in this book and find basic as well as advanced principles of designated subjects related to these phenomena explained plainly. The book contains six chapters by experts in different fields of lithographic fabrication and technology from over 15 research institutes across the globe.
Download or read book Modeling Innovations in EUV and Nanoimprint Lithography written by Yunfei Deng and published by . This book was released on 2005 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Patterning of Microstructures on SU 8 Coated Flexible Polymer Substrates Using Roll to roll Ultraviolet Nanoimprint Lithography written by Nazrin Kooy and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoimprint Lithography An Enabling Process for Nanofabrication written by Weimin Zhou and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint Lithography: An enabling process for nanofabrication presents a comprehensive description of nanotechnology that is one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures, and an emerging lithography candidates for 22, 16 and 11 nm nodes. It provides the exciting, multidisciplinary field, offering a wide range of topics covering: principles, process, material and application. This book would be of specific interest for researchers and graduate students in the field of nanoscience, nanotechnology and nanofabrication, material, physical, chemical, electric engineering and biology. Dr. Weimin Zhou is an associate professor at Shanghai Nanotechnology Promotion Center, China.
Download or read book Lithography written by Source Wikipedia and published by University-Press.org. This book was released on 2013-09 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. Pages: 55. Chapters: Photolithography, Photoresist, Extreme ultraviolet lithography, Electron beam lithography, Multiple patterning, Nanoimprint lithography, Local oxidation nanolithography, Stepper, Computational lithography, Dip-Pen Nanolithography, Micro contact printing, X-ray lithography, Cymer, Inc., Next-generation lithography, Immersion lithography, Photomask, Optical proximity correction, Interference lithography, Phase-shift mask, Maskless lithography, Nanofountain Probe, Stencil lithography, Hysitron, Soft lithography, Semtech Solutions, Multiphoton lithography, Mask shop, Triphenylsulfonium triflate, Quantum lithography, Magnetolithography, Off-axis illumination, PDMS stamp, Mask set, Micropatterning, Plasmonic nanolithography, Nanostencil, KMPR1000, Multilayer soft lithography.
Download or read book Soft UV Nanoimprint Lithography written by Shuhao Si and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by IntechOpen. This book was released on 2011-12-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Alternative Lithography written by Clivia M. Sotomayor Torres and published by Springer. This book was released on 2012-09-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good old Gutenberg could not have imagined that his revolutionary printing concept which so greatly contributed to dissemination of knowledge and thus today 's wealth, would have been a source of inspiration five hundred years later. Now, it seems intuitive that a simple way to produce a large number of replicates is using a mold to emboss pattern you need, but at the nanoscale nothing is simple: the devil is in the detail. And this book is about the "devil". In the following 17 chapters, the authors-all of them well recognized and active actors in this emerging field-describe the state-of-the-art, today 's technological bottlenecks and the prospects for micro-contact printing and nanoimprint lithography. Many results of this book originate from projects funded by the European Com mission through its "Nanotechnology Information Devices" (NID) initiative. NID was launched with the objective to develop nanoscale devices for the time when the red brick scenario of the ITRS roadmap would be reached. It became soon clear however, that there was no point to investigate only alternative devices to CMOS, but what was really needed was an integrated approach that took into account more facets of this difficult undertaking. Technologically speaking , this meant to have a coherent strategy to develop novel devices, nanofabrication tools and circuit & system architectures at the same time.
