Download or read book Emissions from Two stroke Engines written by Marco P. Nuti and published by SAE International. This book was released on 1998 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: ""In the design of new CI engines, it is of paramount importance to reduce the pollutants and fuel consumption,"" writes author Marco Nuti. In this, the first book devoted entirely to exhaust emissions from two-stroke engines, Nuti examines the technical design issues that will determine how long the two-stroke engine survives into the twenty-first century. Dr. Nuti, director of Technical Innovation at Piaggio, thoroughly explores pollutant formation and control from unburned hydrocarbon emissions, carbon monoxide emissions, catalytic aftertreatment, and secondary air addition.
Download or read book Fundamentals of Fuel Injection and Emission in Two Stroke Engines written by Wadysaw Mitianiec and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
Download or read book Final Report TWO STROKE GASOLINE ENGINE EXHAUST EMISSIONS written by David E. Cole and Jay A. Bolt and published by . This book was released on 1969 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.
Download or read book Diesel and Gasoline Engine Exhausts and Some Nitroarenes written by IARC Working Group on the Evaluation of Carcinogenic Risks to Humans and published by IARC Monographs on the Evaluat. This book was released on 2015-06-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the IARC Monographs provides evaluations of the carcinogenicity of diesel and gasoline engine exhausts, and of 10 nitroarenes found in diesel engine exhaust: 3,7-dinitrofluoranthene, 3,9-dinitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 1,8-dinitropyrene, 6-nitrochrysene, 2-nitrofluorene, 1-nitropyrene, 4-nitropyrene, and 3-nitrobenzanthrone. Diesel engines are used for transport on and off roads (e.g. passenger cars, buses, trucks, trains, ships), for machinery in various industrial sectors (e.g. mining, construction), and for electricity generators, particularly in developing countries. Gasoline engines are used in cars and hand-held equipment (e.g. chainsaws). The emissions from such combustion engines comprise a complex and varying mixture of gases (e.g. carbon monoxide, nitrogen oxides), particles (e.g. PM10, PM2.5, ultrafine particles, elemental carbon, organic carbon, ash, sulfate, and metals), volatile organic compunds (e.g. benzene, formaldehyde) and semi-volatile organic compounds (e.g. polycyclic aromatic hydrocarbons) including oxygenated and nitrated derivatives of polycyclic aromatic hydrocarbons. Diesel and gasoline engines thus make a significant contribution to a broad range of air pollutants to which people are exposed in the general population as well as in different occupational settings. An IARC Monographs Working Group reviewed epidemiological evidence, animal bioassays, and mechanistic and other relevant data to reach conclusions as to the carcinogenic hazard to humans of environmental or occupational exposure to diesel and gasoline engine exhausts (including those associated with the mining, railroad, construction, and transportation industries) and to 10 selected nitroarenes. -- Back cover.
Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Reduced Emissions and Fuel Consumption in Automobile Engines written by Fred Schäfer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, there has been much discussion on the interrelation of CO2 emissions with the global warming phenomenon. This in turn has increased pressure to develop and produce more fuel efficient engines and vehicles. This is the central topic of this book. It covers the underlying processes which cause pollutant emissions and the possibilities of reducing them, as well as the fuel consumption of gasoline and diesel engines, including direct injection diesel engines. As well as the engine-related causes of pollution, which is found in the raw exhaust, there is also a description of systems and methods for exhaust post treatment. The significant influence of fuels and lubricants (both conventional and alternative fuels) on emission behavior is also covered. In addition to the conventional gasoline and diesel engines, lean-burn and direct injection gasoline engines and two-stroke gasoline and diesel engines are included. The potential for reducing fuel consumption and pollution is described as well as the related reduction of CO2 emissions. Finally, a detailed summary of the most important laws and regulations pertaining to pollutant emissions and consumption limits is presented. This book is intended for practising engineers involved in research and applied sciences as well as for interested engineering students.
Download or read book Design and Simulation of Two Stroke Engines written by Gordon Blair and published by SAE International. This book was released on 1996-02-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more
Download or read book Internal Combustion Engineering Science Technology written by P.M. Weaving and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sir Diarmuid Downs, CBE, FEng, FRS Engineering is about designing and making marketable artefacts. The element of design is what principally distinguishes engineering from science. The engineer is a creator. He brings together knowledge and experience from a variety of sources to serve his ends, producing goods of value to the individual and to the community. An important source of information on which the engineer draws is the work of the scientist or the scientifically minded engineer. The pure scientist is concerned with knowledge for its own sake and receives his greatest satisfaction if his experimental observations fit into an aesthetically satisfying theory. The applied scientist or engineer is also concerned with theory, but as a means to an end. He tries to devise a theory which will encompass the known experimental facts, both because an all embracing theory somehow serves as an extra validation of the facts and because the theory provides us with new leads to further fruitful experimental investigation. I have laboured these perhaps rather obvious points because they are well exemplified in this present book. The first internal combustion engines, produced just over one hundred years ago, were very simple, the design being based on very limited experimental information. The current engines are extremely complex and, while the basic design of cylinder, piston, connecting rod and crankshaft has changed but little, the overall performance in respect of specific power, fuel economy, pollution, noise and cost has been absolutely transformed.
Download or read book The Basic Design of Two stroke Engines written by Gordon P. Blair and published by . This book was released on 1990 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative publication is a hands-on reference source for the design of two-stroke engines. The state-of-the-art is presented in such design areas as unsteady gas dynamics, scavenging, combustion, emissions and silencing. In addition, this comprehensive publication features a computer program appendix of 28 design programs, allowing the reader to recreate the applications described in the book.
Download or read book Motor Vehicle Emissions a Bibliography with Abstracts Special Bibliography written by and published by . This book was released on 1974 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Generation of Two St written by Pierre Duret and published by Editions OPHRYS. This book was released on with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety with Mobile Diesel powered Equipment Underground written by John C. Holtz and published by . This book was released on 1960 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.
Download or read book Air Pollution Abstracts written by and published by . This book was released on 1971 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report of Investigations written by and published by . This book was released on with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
