Download or read book Two Phase Flows and Heat Transfer with Application to Nuclear Reactor Design Problems written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two phase Flows and Heat Transfer with Application to Nuclear Reactor Design Problems written by Jean J. Ginoux and published by Hemisphere Pub. This book was released on 1978 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Two Phase Flow and Heat Transfer written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, two-phase flow and heat transfer problems associated with two-phase phenomena have been a challenge to many investigators. Two-phase flow applications are found in a wide range of engineering systems, such as nuclear and conventional power plants, evaporators of refrigeration systems and a wide vari ety of evaporative and condensive heat exchangers in the chemical industry. This publication is based on the invited lectures presented at the NATO Advanced Research Workshop on the Advances in Two-Phase Flow and Heat Transfer. The Horkshop was attended by more than 50 leading scientists and practicing engineers who work actively on two-phase flow and heat transfer research and applications in dif ferent sectors (academia, government, industry) of member countries of NATO. Some scientific leaders and experts on the subject matter from the non-NATO countries were also invited. They convened to discuss the state-of-the-art in two-phase flow and heat transfer and formulated recommendations for future research directions. To achieve these goals, invited key papers and a limited number of contributions were presented and discussed. The specific aspects of the subject were treated in depth in the panel sessions, and the unresolved problems identified. Suitable as a practical reference, these volumes incorporate a systematic approach to two-phase flow analysis.
Download or read book Advances in Two Phase Flow and Heat Transfer written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, two-phase flow and heat transfer problems associated with two-phase phenomena have been a challenge to many investigators. Two-phase flow applications are found in a wide range of engineering systems, such as nuclear and conventional power plants, evaporators of refrigeration systems and a wide vari ety of evaporative and condensive heat exchangers in the chemical industry. This publication is based on the invited lectures presented at the NATO Advanced Research Workshop on the Advances in Two-Phase Flow and Heat Transfer. The Horkshop was attended by more than 50 leading scientists and practicing engineers who work actively on two-phase flow and heat transfer research and applications in dif ferent sectors (academia, government, industry) of member countries of NATO. Some scientific leaders and experts on the subject matter from the non-NATO countries were also invited. They convened to discuss the state-of-the-art in two-phase flow and heat transfer and formulated recommendations for future research directions. To achieve these goals, invited key papers and a limited number of contributions were presented and discussed. The specific aspects of the subject were treated in depth in the panel sessions, and the unresolved problems identified. Suitable as a practical reference, these volumes incorporate a systematic approach to two-phase flow analysis.
Download or read book Nuclear Thermal Hydraulic and Two Phase Flow written by Jun Wang and published by Frontiers Media SA. This book was released on 2018-10-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear energy is one of the most important clear energy and contributes more than 10% electric power to human society in the past decades of years. The nuclear thermal hydraulic and two-phase flow is one of the basic branches of nuclear technology and provides structure design and safety analysis to the nuclear power reactors. In the new century, the basic theoretical research of thermal hydraulic and two-phase flow, and innovative design for the next generation nuclear power plants (especially for the small modular reactor and molten salt reactor), along with other nuclear branches, constantly support the development of nuclear technology.
Download or read book Heat Transfer and Fluid Flow in Nuclear Systems written by Henri Fenech and published by Elsevier. This book was released on 2013-10-22 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer and Fluid in Flow Nuclear Systems discusses topics that bridge the gap between the fundamental principles and the designed practices. The book is comprised of six chapters that cover analysis of the predicting thermal-hydraulics performance of large nuclear reactors and associated heat-exchangers or steam generators of various nuclear systems. Chapter 1 tackles the general considerations on thermal design and performance requirements of nuclear reactor cores. The second chapter deals with pressurized subcooled light water systems, and the third chapter covers boiling water reactor systems. Chapter 4 tackles liquid metal cooled systems, while Chapter 5 discusses helium cooled systems. The last chapter deals with heat-exchangers and steam generators. The book will be of great help to engineers, scientists, and graduate students concerned with thermal and hydraulic problems.
Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2017-01-11 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.
Download or read book Thermal Hydraulic Analysis of Nuclear Reactors written by Bahman Zohuri and published by Springer. This book was released on 2017-05-23 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. The book begins with fundamental definitions of units and dimensions, thermodynamic variables and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. There have been significant new findings for intercooled systems since the previous edition published and they will be included in this volume. New technology plans for using a Nuclear Air-Brayton as a storage system for a low carbon grid are presented along with updated component sizes and performance criteria for Small Modular Reactors. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors.
Download or read book A New Method for Determining the Stability of Two phase Flow in Parallel Heated Channels with Applications to Nuclear Reactors written by J. H. Bick and published by . This book was released on 1960 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Systems Volume II written by Neil E. Todreas and published by CRC Press. This book was released on 2021-12-13 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses fundamental ideas for various modeling approaches for the macro- and micro-scale flow conditions in the reactor. Covers specific design considerations, such as natural convection and core reliability. Enables the reader to better understand the importance of safety considerations in thermal engineering and analysis of a modern nuclear plant. Features end-of-chapter problems. Includes a Solutions Manual for adopting instructors.
Download or read book Multiphase Flow Dynamics 5 written by Nikolay Ivanov Kolev and published by Springer. This book was released on 2015-04-02 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demonstrate the success of the different ideas and models. After an introduction of the design of the reactor pressure vessels for pressurized and boiling water reactors the accuracy of the modern methods is demonstrated using large number of experimental data sets for steady and transient flows in heated bundles. Starting with single pipe boiling going through boiling in the rod bundles the analysis of complete vessel including the reactor is finally demonstrated. Then a powerful method for nonlinear stability analysis of flow boiling and condensation is introduced. Models are presented and their accuracies are investigated for describing critical multiphase flow at different level of complexity. Therefore the book presents a complete coverage of the modern Nuclear Thermal Hydrodynamics. This present third edition includes various updates, extensions, improvements and corrections.
Download or read book CFD Applications in Nuclear Engineering written by Wenxi Tian and published by Frontiers Media SA. This book was released on 2023-08-21 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: High fidelity nuclear reactor thermal hydraulic simulations are a hot research topic in the development of nuclear engineering technology. The three-dimensional Computational Fluid Dynamics (CFD) and Computational Multi-phase Fluid Dynamics (CMFD) methods have attracted significant attention in predicting single-phase and multi-phase flows under steady-state or transient scenarios in the field of nuclear reactor engineering. Compared with three-dimensional thermal hydraulic methods, the traditional one-dimensional system analysis method contains inherent defects in the required accuracy and spatial resolution for a number of important nuclear reactor thermal-hydraulic phenomena. At present the CFD method has been widely adopted in the nuclear industry, across both light water reactors and liquid metal cooled fast reactors, providing an effective solution for complex issues of thermal hydraulic analysis. However, the CFD method employs empirical models for turbulence simulation, heat transfer, multi-phase interaction and chemical reactions. Such models must be validated before they can be used with confidence in nuclear reactor applications. In addition, user practice guidelines play a critical role in achieving reliable results from CFD simulations.
Download or read book Two phase Transport Reactor Safety written by T. Nejat Veziroğlu and published by . This book was released on 1978 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TWO PHASE FLOWS WITH APPLICATION TO NUCLEAR REACTOR DESIGN PROBLEMS LECTURES VON KARMAN INSTITUTE FOR FLUID DYNAMICS written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Heat Transfer And Two Phase Flow written by L S Tong and published by Routledge. This book was released on 2018-05-04 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, this graduate text describes the current state of boiling heat transfer and two-phase flow, in terms through which students can attain a consistent understanding. Prediction of real or potential boiling heat transfer behaviour, both in steady and transient states, is covered to aid engineering design of reliable and effective systems.
Download or read book Problems of Heat Transfer and Hydraulics of Two Phase Media written by S. S. Kutateladze and published by Elsevier. This book was released on 2013-10-22 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems of Heat Transfer and Hydraulics of Two-Phase Media presents the theory of heat transfer and hydrodynamics. This book discusses the various aspects of heat transfer and the flow of two-phase systems. Organized into two parts encompassing 22 chapters, this book starts with an overview of the laws of similarity for heat transfer to or from a flowing liquid with various physical properties and allowed for variation in viscosity and thermal conductivity. This book then explores the general functional relationship that exists between viscosity and thermal conductivity for thermodynamically similar substances. Other chapters consider the theoretical and experimental work concerning the critical heat flux for the flow of steam–water mixtures via tubes and non-circular ducts. The final chapter deals with the validity of the proposed equation for the variation of drum pressure. This book is a valuable resource for scientific workers, engineers, and technologists who are involved in the development and design of heat exchange equipment, nuclear reactors, and steam generators.
Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2017-01-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.
