Download or read book Two dimensional Computer Simulation of In situ Combustion Oil Recovery Process and Iterative Methods written by Ahmet Refik Bahadir and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by Stanford University. This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.

Download or read book Numerical Simulation of in Situ Combustion in a Two dimensional System written by James Thurman Smith and published by . This book was released on with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Simulation of the Forward In Situ Combustion Oil Recovery Process Using a Stream Channel Model written by Abdul-Fadi Z. Jarjur and published by . This book was released on 1977 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.

Download or read book A Two dimensional Compositional Simulation of the in Situ Combustion Process written by M. N. Derahman and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Investigation and High Resolution Simulation of In Situ Combustion Processes written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This final technical report describes work performed for the project 'Experimental Investigation and High Resolution Numerical Simulator of In-Situ Combustion Processes', DE-FC26-03NT15405. In summary, this work improved our understanding of in-situ combustion (ISC) process physics and oil recovery. This understanding was translated into improved conceptual models and a suite of software algorithms that extended predictive capabilities. We pursued experimental, theoretical, and numerical tasks during the performance period. The specific project objectives were (i) identification, experimentally, of chemical additives/injectants that improve combustion performance and delineation of the physics of improved performance, (ii) establishment of a benchmark one-dimensional, experimental data set for verification of in-situ combustion dynamics computed by simulators, (iii) develop improved numerical methods that can be used to describe in-situ combustion more accurately, and (iv) to lay the underpinnings of a highly efficient, 3D, in-situ combustion simulator using adaptive mesh refinement techniques and parallelization. We believe that project goals were met and exceeded as discussed.

Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICIAM 87 written by James McKenna and published by SIAM. This book was released on 1988-01-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book Reservoir Simulation written by Zhangxin Chen and published by SIAM. This book was released on 2007-01-01 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers and expands upon material presented by the author at a CBMS-NSF Regional Conference during a ten-lecture series on multiphase flows in porous media and their simulation. It begins with an overview of classical reservoir engineering and basic reservoir simulation methods and then progresses through a discussion of types of flows—single-phase, two-phase, black oil (three-phase), single phase with multicomponents, compositional, and thermal. The author provides a thorough glossary of petroleum engineering terms and their units, along with basic flow and transport equations and their unusual features, and corresponding rock and fluid properties. The practical aspects of reservoir simulation, such as data gathering and analysis, selection of a simulation model, history matching, and reservoir performance prediction, are summarized. Audience This book can be used as a text for advanced undergraduate and first-year graduate students in geology, petroleum engineering, and applied mathematics; as a reference book for geologists, petroleum engineers, and applied mathematicians; or as a handbook for practitioners in the oil industry. Prerequisites are calculus, basic physics, and some knowledge of partial differential equations and matrix algebra.Contents List of Figures; List of Tables; List of Notation; Preface; Introduction; Chapter 1: A Glossary of Petroleum Terms; Chapter 2: Single-Phase Flow and Numerical Solution; Chapter 3: Well Modeling; Chapter 4: Two-Phase Flow and Numerical Solution; Chapter 5: The Black Oil Model and Numerical Solution; Chapter 6: Transport of Multicomponents in a Fluid and Numerical Solution; Chapter 7: Compositional Flow and Numerical Solution; Chapter 8: Nonisothermal Flow and Numerical Solution; Chapter 9: Practical Topics in Reservoir Simulation; Bibliography; Index.

Download or read book Journal of Energy Resources Technology written by and published by . This book was released on 1981 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Society of Petroleum Engineers Journal written by Society of Petroleum Engineers of AIME. and published by . This book was released on 1985 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Abstracts written by and published by . This book was released on 1993 with total page 1752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy written by and published by . This book was released on with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parallel Computing Accelerating Computational Science and Engineering CSE written by M. Bader and published by IOS Press. This book was released on 2014-03-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computing has been the enabling technology of high-end machines for many years. Now, it has finally become the ubiquitous key to the efficient use of any kind of multi-processor computer architecture, from smart phones, tablets, embedded systems and cloud computing up to exascale computers. _x000D_ This book presents the proceedings of ParCo2013 – the latest edition of the biennial International Conference on Parallel Computing – held from 10 to 13 September 2013, in Garching, Germany. The conference focused on several key parallel computing areas. Themes included parallel programming models for multi- and manycore CPUs, GPUs, FPGAs and heterogeneous platforms, the performance engineering processes that must be adapted to efficiently use these new and innovative platforms, novel numerical algorithms and approaches to large-scale simulations of problems in science and engineering._x000D_ The conference programme also included twelve mini-symposia (including an industry session and a special PhD Symposium), which comprehensively represented and intensified the discussion of current hot topics in high performance and parallel computing. These special sessions covered large-scale supercomputing, novel challenges arising from parallel architectures (multi-/manycore, heterogeneous platforms, FPGAs), multi-level algorithms as well as multi-scale, multi-physics and multi-dimensional problems._x000D_ It is clear that parallel computing – including the processing of large data sets (“Big Data”) – will remain a persistent driver of research in all fields of innovative computing, which makes this book relevant to all those with an interest in this field.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: