Download or read book Co Rotating Twin Screw Extruder written by Klemens Kohlgrüber and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-rotating screws and/or extruders are used in many branches of industry for producing, preparing and/or processing highly viscous materials. They find a wide variety of applications especially in the plastics, rubber and food industries. Co-rotating twin-screw machines usually have modular configurations and are thus quite flexible for adapting to changing tasks and material properties. Well-founded knowledge of machines, processes and material behavior are required in order to design twin-screw extruder for economically successful operations. This book provides basic engineering knowledge regarding twin-screw machines; it lists the most important machine-technical requirements and provides examples based on actual practice. Better understanding of the processes is emphasized as this is a prerequisite for optimizing twin-screw designs and operating them efficiently. Besides basic functions, such as compounding, the book focuses on: - the historical development of twin-screws - the geometry of the screw elements (fundamentals, basic patents, patents overview) - material properties and material behavior in the machine - fundamentals of feed behavior, pressure build-up and power input - examples of applications for various processing tasks - compounding: tasks, applications, processing zones - potential and limits of modeling - scaling-up various processes - machine design incl. drives and materials

Download or read book Twin Screw Extruders written by F. Martelli and published by Springer. This book was released on 2012-02-16 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on plastics machinery include a preamble on the origin of such equipment, and some even discuss the origin of plastic itself, dating back to the early 1900s and such men as Leo Baekeland - the real founder of synthetic plastics. There seems therefore, little pur pose in reiterating what has been said before and going over the same ground so adequately covered in a number of books as well as the trade press. We are indebted to the author of this excellent treatise on twin-screw extruders for getting right down to the business at hand. The author makes mention of two pioneers - Roberto Colombo and Carlo Pasquetti - who were the first to develop twin-screw ex truders. It was my good fortune to follow the work of these pioneers, and, interestingly enough, the principles were so good that their work continues to be relevant even to the advanced and more sophisticated models so well defmed in this book.

Download or read book Twin Screw Extrusion written by James Lindsay White and published by Hanser Gardner Publications. This book was released on 2010 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twin screw extrusion has become an important part of polymer processing technology. Twin screw extruders are widely used for reactive, procesing, including both polymerization and grafting reactions, for compounding, blending, devolatilization, as well as for thermoplastic final shaping operations, particularly profile extrusion. The purpose of this book is to carefully describe each of these three types of machines and the historical development of their technologies. The book also provides insight into the efforts to model/simulate the flow characteristics of these machines and into the experimental studies of their machine characteristics. This book is unique in clearly distinguishing between the different types of twin screw extruders on the market and in reviewing their capabilities. It is the authors' primary intention to provide a balanced but in-depth overview of twin screw extrusion technology to chemists, engineers and technologists alike

Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Screw Extrusion written by James Lindsay White and published by . This book was released on 2003 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw extruders are the most important of all polymer processing machines There is a need for a comprehensive book on this subject. This book emphazises the understanding of the underlaying principles of screw extrusion, the design and behavior of screw based machines. It helps the enineer t optimize his equipment and enhance production rates. Contents: · Introduction · Fundamentals · Screw Extrusion Technology · Technology of Single Screw Extrusion with Reciprocating Screws · Single Screw Extruder Analysis and Design · Twin and Multiscrew Extrusion

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.

Download or read book Extruders in Food Applications written by Mian N. Riaz and published by CRC Press. This book was released on 2000-02-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of years of experience by experts in extrusion technology, Extruders in Food Applications brings together practical experience and in-depth knowledge of extrusion cooking technology. This concise reference summarizes basic considerations for the application of extrusion technology to food industry processes and focuses on the various types of extruders available for a growing number of food applications. Chapters compare and describe the different types of extruders and their functions, including characteristics, advantages and disadvantages, and applications, providing a wealth of information about dry extruders, interrupted flight extruder-expanders, and single screw and twin screw extruders. The effects of preconditioning on the raw material and of extrusion on the nutrients of products are covered as well. This book is a valuable source for the technical and practical application of extrusion and will be useful for the selection of the proper equipment for this technology.

Download or read book Extrusion of Polymers written by Chan I. Chung and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents single-screw extrusion technology together with the relevant polymer fundamentals, with an emphasis on screw design. The presentation begins on a physical level, providing an in-depth conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by numerous examples. A brief description of twin-screw extrusion technology is also presented. New in the third edition: a novel patented barrier screw design that eliminates shortcomings of all previous barrier screw designs, more descriptive specific screw design guidelines, a scientifically designed pineapple mixing section, and general improvements and corrections. Contents: • Physical Description of Single-Screw Extrusion • Fundamentals of Polymers and Melt Rheology • Theories of Single-Screw Extrusion and Scale-Up • Screw Design and High Performance Screws • Gear Pumps, Static Mixers, and Dynamic Mixers • Die Design • Viscoelastic Effects in Melt Flow • Special Single-Screw Extruder with Channeled Barrel • Physical Description of Twin-Screw Extruders

Download or read book Extruder Principles and Operation written by M.J. Stevens and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to fill a gap between the theoretical studies and the practical experience of the processor in the extrusion of thermoplastic polymers. The former have provided a basis for numerical design of extruders and their components, but generally give scant attention to the practical performance, especially to the conflict between production rate and product quality. In practice extruders are frequently purchased to perform a range of duties; even so, the operator may have to use a machine designed for another purpose and not necessarily suitable for the polymer, process or product in hand. The operator's experience enables him to make good product in unpromising circumstances, but a large number of variables and interactions often give apparently contradictory results. The hope is that this book will provide a logical background, based on both theory and experience, which will help the industrial processor to obtain the best performance from his equipment, to recognize its limitations, and to face new problems with confidence. Mathematics is used only to the extent that it clarifies effects which cannot easily be expressed in words; ifit is passed over, at least a qualitative understanding should remain. The approximate theory will not satisfy the purist, but this seems to the authors less important than a clear representation of the physical mechanisms on which so much of the polymer processing industry depends. M. J. STEVENS J. A.

Download or read book Troubleshooting the Extrusion Process written by María del Pilar Noriega E. and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Troubleshooting extrusion problems is one of the most challenging tasks in extrusion operations, requiring a good understanding of the extrusion process and the material properties, good instrumentation, good analysis tools, and a systematic and logical approach. This book addresses all issues crucial in extrusion troubleshooting. Additionally, it includes industrial case studies, richly illustrated with photographs and photomicrographs, used to provide exemplary approaches to efficient problem analysis and problem solving. The interconnectivity between the different relevant knowledge areas such as materials engineering, processing technology, and product development is emphasized. This revised third edition comprises a very significant update, with a great deal of new content, especially focusing on additional case studies as well as new sections on collection and interpretation of extrusion process data, rotational rheometry, the smartphone, how screw design can affect extruder performance, melt temperature variation, recent research on automatic optimization of extruder barrel temperatures, process signal analysis using Fast Fourier Transform, among other topics.

Download or read book Melt Extrusion written by Michael A. Repka and published by Springer Science & Business Media. This book was released on 2013-10-11 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides readers with the basic principles and fundamentals of extrusion technology and a detailed description of the practical applications of a variety of extrusion processes, including various pharma grade extruders. In addition, the downstream production of films, pellets and tablets, for example, for oral and other delivery routes, are presented and discussed utilizing melt extrusion. This book is the first of its kind that discusses extensively the well-developed science of extrusion technology as applied to pharmaceutical drug product development and manufacturing. By covering a wide range of relevant topics, the text brings together all technical information necessary to develop and market pharmaceutical dosage forms that meet current quality and regulatory requirements. As extrusion technology continues to be refined further, usage of extruder systems and the array of applications will continue to expand, but the core technologies will remain the same.

Download or read book Pharmaceutical Extrusion Technology written by Isaac Ghebre-Selassie and published by CRC Press. This book was released on 2003-05-14 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Extrusion Technology is the only resource to provide in-depth descriptions and analyses of the key parameters of extruders and extrusion processes. The book highlights the applicability of melt extrusion in pharmaceutical drug development and product manufacturing, including controlled release, dissolution rate and bioavailability enhancement, and granulation technology. It brings together the technical information necessary to develop and market pharmaceutical dosage forms that meet current quality and regulatory requirements and details extruder hardware and controls, process definition and troubleshooting of single and twin screw extrusion processes, and more.

Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.

Download or read book Understanding Extrusion written by Chris Rauwendaal and published by . This book was released on 2018-12-10 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book provides a practical understanding of basic information on extrusion in a way useful to readers without an engineering degree as well as to those new to the field. It is primarily written for extruder operators, supervisors, technical service personnel, and process engineers. Designed for on-the-job use, it guides the reader step by step through material issues, machinery, processing, and troubleshooting. This revised and extended third edition now also covers interpretation of extrusion process data, analysis of shrink void formation, dimensional variation by melt temperature fluctuations, efficient extrusion, grooved barrel extruder technology, and more. Contents: Extrusion Machinery Instrumentation and Control Complete Extrusion Lines Plastics and Their Properties Important in Extrusion How an Extruder Works How to Run an Extruder How to Troubleshoot Extrusion Problems New Developments in Extrusion and Methods to Increase Efficiency"--

Download or read book Extrusion in Ceramics written by Frank Händle and published by Springer Science & Business Media. This book was released on 2009-08-12 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank Handle ̈ 1.1 What to Expect For some time now, I have been toying around with the idea of writing a book about “Ceramic Extrusion”, because to my amazement I have been unable to locate a single existing, comprehensive rundown on the subject – much in contrast to, say, plastic extrusion and despite the fact that there are some outstanding contributions to be found about certain, individual topics, such as those in textbooks by Reed [1], Krause [2], Bender/Handle ̈ [3] et al. By way of analogy to Woody Allen’s wonderfully ironic movie entitled “Eve- thing You Always Wanted to Know about Sex”, I originally intended to call this book “Everything You Always Wanted to Know about Ceramic Extrusion”, but - ter giving it some extra thought, I eventually decided on a somewhat soberer title. Nevertheless, my companion writers and I have done our best – considering our target group and their motives – not to revert to the kind of jargon that people use when they think the less understandable it sounds, the more scienti c it appears. This book addresses all those who are looking for a lot or a little general or selective information about ceramic extrusion and its sundry aspects. We realize that most of our readers will not be perusing this book just for fun or out of intellectual curiosity, but because they hope to get some use out of it for their own endeavours.

Download or read book Extrusion Problems Solved written by M N Riaz and published by Elsevier. This book was released on 2011-11-09 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrusion is widely used for the preparation of a variety of foodstuffs including breakfast cereals, snack food and pasta, as well as pet food and animal and aquaculture feed. Extrusion problems solved provides responses to more than 300 frequently asked questions about the process of food extrusion and the techniques and equipment involved, in a practical question-and-answer format.The book is divided into twelve chapters for ease of reference: the opening chapters concentrate on introductory queries and on different components of an extruder system, followed by two chapters that help the reader select the correct type of extruder for a product. Chapters five and six discuss the impact of factors such as protein content and particle size on the extrusion process, while the use of pre-conditioners is discussed in chapter seven. The latter part of the book discusses specific types of extruder and die and knife assemblies, followed by a chapter on issues relating to drying extruded food products. The final chapter offers practical guidelines and rules of thumb for the most common issues relating to food and feed extrusion.Written by two leading experts in the field, Extrusion problems solved is an essential reference source and troubleshooting guide for professionals working in food, pet food and feed extrusion. It will also be a valuable training resource for students of extrusion. - Offers practical guidelines and rules of thumb for the most common food and feed extrusion problems - Chapters concentrate on introductory queries, types of extruder and components of extruder systems, knife assemblies, the use of pre-conditioners and issues in drying extruded food products - Provides responses to more than 300 frequently asked questions about the processes, equipment and techniques of food extrusion in a practical question-and-answer format