Download or read book Turbom quinas hidr ulicas written by Claudio Mataix Plana and published by Universidad Pontificia Comillas. This book was released on 2009-09-15 with total page 1721 pages. Available in PDF, EPUB and Kindle. Book excerpt: En el presente tomo, dedicado a las turbomáquinas hidráulicas, el autor, con su habitual claridad y sencillez de lenguaje y formulación, va combinando los fundamentos de estas máquinas con un exhaustivo trabajo de recopilación y síntesis sobre los criterios para el diseño y uso de las mismas. Aduce múltiples ejemplos de máquinas comerciales, identificando sus características más relevantes, y presenta numerosos ejercicios resueltos que abarcan desde la simple aplicación de la teoría elemental, hasta el diseño completo de los principales tipos de máquinas. El resultado es un auténtico tratado sobre las turbomáquinas hidráulicas parala formación de ingenieros del entorno industrial a lo largo de su vida, y de especial importancia en estos momentos de reforma en las universidades españolas, en que se plantea un aumento del trabajo personal del alumno y por tanto la necesidad de bibliografía con gran calidad pedagógica. 1. INTRODUCCIÓN A LAS TURBOMÁQUINAS HIDRÁULICAS 2. RESUMEN DE MECÁNICA DE FLUIDOS 3. INTERCAMBIO DE ENERGÍA EN EL RODETE 4. PÉRDIDAS, SALTOS ENERGÉTICOS (ALTURAS), POTENCIAS Y RENDIMIENTOS EN LAS TURBOMÁQUINAS HIDRÁULICAS 5. LAS BOMBAS HIDRÁULICAS: CLASIFICACIONES DIVERSAS 6. Y ELEMENTOS CONSTITUTIVOS 7. UTILIZACIÓN DE LA ENERGÍA HIDRÁULICA 8. LAS TURBINAS HIDRÁULICAS Y LAS CENTRALES HIDROELÉCTRICAS 9. LEYES DE SEMEJANZA Y COEFICIENTES CARACTERÍSTICOS 10. DE LAS TURBOMÁQUINAS HIDRÁULICAS 11. PROYECTO DE LAS BOMBAS RADIALES Y DE LAS DIMENSIONES 12. PRINCIPALES DE LAS BOMBAS DIAGONALES 13. PROYECTO AERODINÁMICO DE LAS TURBOMÁQUINAS AXIALES 14. ESTUDIO Y PROYECTO DE LAS TURBINAS HIDRÁULICAS 15. SEMIAXIALES: TURBINAS FRANCIS 16. ESTUDIO Y PROYECTO DE LAS TURBINAS HIDRÁULICAS 17. DE REACCIÓN DE ÁLABES ORIENTABLES: TURBINAS KAPLAN Y TURBINAS DERIAZ 18. ESTUDIO Y PROYECTO DE LAS TH TANGENCIALES: TURBINAS PELTON 19. PECULIARIDADES DE LOS VENTILADORES 20. CENTRALES DE ACUMULACIÓN POR BOMBEO. TURBINAS 21. HIDRÁULICAS Y TURBOMÁQUINAS HIDRÁULICAS REVERSIBLES 22. UTILIZADAS EN ESTAS CENTRALES 23. ESTUDIO DE LAS TURBOMÁQUINAS HIDRÁULICAS COMPUESTAS: 24. TRANSMISIONES HlDRODINÁMICAS 25. CONSTRUCCIÓN DE LAS TURBOMÁQUINAS HIDRÁULICAS 26. FUNCIONAMIENTO DE LAS TURBOMÁQUINAS HIDRÁULICAS 27. FUERA DEL PUNTO DE DISEÑO 28. REGULACIÓN DE LAS TURBINAS HIDRÁULICAS 29. FUNCIONAMIENTO DE UNA B EN LA INSTALACIÓN. NORMALIZACIÓN 30. DE LAS BOMBAS. TORNEADO DEL RODETE. 31. FUNCIONAMIENTO DE VARIAS BOMBAS EN PARALELO Y SERIE 32. REGULACIÓN DE LAS BOMBAS Y LOS VENTILADORES 33. FENÓMENOS ANORMALES EN EL FUNCIONAMIENTO DE 34. LAS TURBOMÁQUINAS HIDRÁULICAS 35. ALTURA DE SUSPENSIÓN Y CAVITACIÓN 36. INVESTIGACIÓN Y ENSAYOS EXPERIMENTALES DE LAS TMH

Download or read book Fault Detection Supervision and Safety of Technical Processes 2003 SAFEPROCESS 2003 written by Marcel Staroswiecki and published by Elsevier. This book was released on 2004-02-27 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-volume work bringing together papers presented at 'SAFEPROCESS 2003', including four plenary papers on statistical, physical-model-based and logical-model-based approaches to fault detection and diagnosis, as well as 178 regular papers.

Download or read book Logistics Management and Optimization through Hybrid Artificial Intelligence Systems written by Ortiz Zezzatti, Carlos Alberto Ochoa and published by IGI Global. This book was released on 2012-03-31 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book offers the latest research within the field of HAIS, surveying the broad topics and collecting case studies, future directions, and cutting edge analyses, investigating biologically inspired algorithms such as ant colony optimization and particle swarm optimization"--

Download or read book Dictionary of Hydraulic Machinery written by Adam Tadeusz Troskolański and published by Pwn Polish Scientific Publishers. This book was released on 1985 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Machinery and Cavitation written by Enrique Cabrera and published by Springer Science & Business Media. This book was released on 1996 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the second volume, the papers included the following topics: hydraulic transients and control systems related to hydraulic machinery and plants; and oscillatory and vibration problems in hydraulic machinery and power stations.

Download or read book Vibration and Oscillation of Hydraulic Machinery written by Hideo Ohashi and published by Taylor & Francis. This book was released on 2016-12-05 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with vibration-free and quiet operation of hydraulic machines. It deals with the problems caused by mechanical and hydraulic excitations in hydraulic machinery (except for transients which are treated in a separate volume). The invited authors from five continents are internationally recognized experts in their fields. The book looks at the fundamentals for analysis of fluid structure systems, structural vibration, shaft rotordynamics and system instability; noise and diagnosis are introduced with examples from practical experience.

Download or read book Water Systems towards New Future Challenges written by Helena M. Ramos and published by MDPI. This book was released on 2021-03-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises components associated with smart water which aims at the exploitation and building of more sustainable and technological water networks towards the water–energy nexus and system efficiency. The implementation of modeling frameworks for measuring the performance based on a set of relevant indicators and data applications and model interfaces provides better support for decisions towards greater sustainability and more flexible and safer solutions. The hydraulic, management, and structural models represent the most effective and viable way to predict the behavior of the water networks under a wide range of conditions of demand and system failures. The knowledge of reliable parameters is crucial to develop approach models and, therefore, positive decisions in real time to be implemented in smart water systems. On the other hand, the models of operation in real-time optimization allow us to extend decisions to smart water systems in order to improve the efficiency of the water network and ensure more reliable and flexible operations, maximizing cost, environmental, and social savings associated with losses or failures. The data obtained in real time instantly update the network model towards digital water models, showing the characteristic parameters of pumps, valves, pressures, and flows, as well as hours of operation towards the lowest operating costs, in order to meet the requirement objectives for an efficient system.

Download or read book Elsevier s Dictionary of Engineering written by M. Bignami and published by Elsevier Science. This book was released on 2004-07-01 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 10, 987 terms in two volumes terms covering the following 14 main fields: Architectural Engineering and Buildings, Civil Engineering, Engineering, Geology, Geotechnical Engineering, Hydraulics, Hydrogeology, Hydrology, Mechanical Engineering, Mechanics, Mining Engineering, Petroleum Engineering, Science and Technics, Surveying. The dictionary has two sections: the first one, the Basic Table, lists the terms in English (as well as those which are specifically American) in alphabetical order followed by their equivalents in German, French, Italian, Spanish and Portuguese/Brazilian. In the second section, the indexes, the German, French, Italian, Spanish and Portuguese/Brazilian terms are listed in five separate alphabetical indexes. The dictionary is a basic tool for all contractors abroad. It will offer the adequate technical support for specialists evolving in an international environment.

Download or read book Advances in Water Distribution Networks written by Giuseppe Pezzinga and published by MDPI. This book was released on 2019-02-28 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue on Advances in Water Distribution Networks (WDNs) explores four important topics of research in the framework of WDNs, namely simulation and optimization modelling, topology and partitioning, water quality, and service effectiveness. With regard to the first topic, the following aspects are addressed: pressure-driven formulations, algorithms for the optimal location of control valves to minimize leakage, the benefits of water discharge prediction for the remote real time control of valves, and transients generated by pumps operating as turbines. In the context of the second topic, a topological taxonomy of WDNs is presented, and partitioning methods for the creation of district metered areas are compared. In relation to the third topic, the vulnerability to trihalomethane is assessed, and a statistical optimization model to minimize heavy metal releases is presented. Finally, the fourth topic focusses on the estimation of non-revenue water, including leakage and unauthorized consumption, and on the assessment of service under intermittent supply conditions.

Download or read book Trends in Educational Activity in the Field of Mechanism and Machine Theory 2018 2022 written by Juan Carlos García Prada and published by Springer Nature. This book was released on 2023-06-10 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents content from the Third International Symposium on the Education in Mechanism and Machine Science (ISEMMS 2022). Among others, the chapters report on mechanical engineering education, mechanism and machine science in the mechanical engineer curricula, methodology, virtual laboratories and new laws. Special attention is given to MMS experiences in Pandemic times. The chapters discuss the current problems in MMS education with the aim of providing solutions and identifying appropriate trends for a modern world common vision in the Engineering education field.

Download or read book Subject Catalog written by Library of Congress and published by . This book was released on with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Who s who in Technology 1984 written by Karl Strute and published by . This book was released on 1984 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book America s Leading Manufacturers written by and published by . This book was released on 1921 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Commercial Year Book written by Birmingham (England). Chamber of Commerce and published by . This book was released on 1924 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Union Catalog written by and published by . This book was released on 1973 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.

Download or read book Brazil written by United States. Industry and Trade Administration and published by . This book was released on 1979 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bibliographic Guide to Technology written by New York Public Library. Research Libraries and published by . This book was released on 1978 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: