Download or read book TRUCK AND BUS TIRE PERFORMANCE REQUIREMENTS AND TEST PROCEDURES written by and published by . This book was released on 1968 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and accompanying uniform laboratory test procedures for evaluating certain essential characteristics of new tires and newly retreaded tires intended primarily for highway use on trucks, buses, trailers, and multi-purpose passenger vehicles.(The requirements published in this SAE Recommended Practice pertain to tire sizes currently used on American trucks, buses, trailers, and multi-purpose passenger vehicles. For related information on tire sizes not listed, contact Society of Automotive Engineers, Inc., Detroit Branch Office, 18121 East Eight Mile Road, East Detroit, Michigan 48021.).
Download or read book Wheels Rims Performance Requirements and Test Procedures Truck and Bus written by Truck and Bus Wheel Committee and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992. This document does not cover other special application wheels and rims.
Download or read book Wheels RimsPerformance Requirements and Test ProceduresTruck and Bus written by Truck and Bus Wheel Committee and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992. This document does not cover other special application wheels and rims. This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. During the 5 year review we found that dimensions for the wheel test adapter (wheel backup diameter) were missing from the document. SAE J694 was added to the document list. A note was also added to the procedure sections to go to SAE J694 for test adapter dimensions (wheel backup diameter). Appendix B was updated to include current production tires and their slr (static loaded radii).
Download or read book Wheels Rims Trucks Performance Requirements and Test Procedures written by Truck and Bus Wheel Committee and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992. This document does not cover other special application wheels and rims.
Download or read book Wheels Rims Truck and Bus Performance Requirements and Test Procedures for Radial and Cornering Fatigue written by Truck and Bus Wheel Committee and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. Users may establish design criteria exceeding the minimum performance requirement for added confidence in a design. The cycle requirements noted in Tables 1 and 2 are based on Weibull statistics using 2 parameter, median ranks, 50% confidence level and 90% reliability, and beta equal to 2, typically noted as B10C50. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992. This document does not cover other special application wheels and rims. SAE J267 practitioners have typically performed multiple cornering and radial fatigue tests when assessing a wheel design's conformance with this recommended practice. Running multiple tests enhances the confidence and reliability of the results. In this revision, this common practice has been formalized by introducing a set of sample sizes and corresponding cycle requirements based on Weibull statistics.Previous publications of SAE J267 contained terminology to "provide minimum performance requirements". This terminology was not consistently interpreted by practitioners. To clarify the meaning, a definition of the term "minimum performance requirement" has been added.An additional cause for termination was added for aluminum wheels.
Download or read book NBS Special Publication written by and published by . This book was released on 1971 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Free Rolling Cornering Test for Truck and Bus Tires written by Truck and Bus Powertrain Steering Committee and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice describes a test method for determination of steady-state heavy truck (Class VI, VII, and VIII) tire force and moment properties under free-rolling conditions. The properties are acquired as functions of incrementally changed slip angle and normal force using a sequence specified in this document. The data are suitable for use in vehicle dynamics modeling, comparative evaluations for research and development purposes, and manufacturing quality control. Truck Tires-For the purposes of this document, truck tires are defined as being the tires mounted on all heavy commercial over-the-road trucks and buses. Examples of vehicles which use heavy truck tires include: tractor/semi-trailer combinations, dump trucks, school buses, etc. Tires mounted on other types of lighter GVWR vehicles are explicitly excluded from consideration in this document. Effects Not Considered-The effects of inclination angle and spindle torque or any combination of inclination and spindle torque with slip angle and normal force are not considered in this document. Test Machines-This document is test machine neutral. It may be applied using any type of test machine capable of fulfilling the requirements stated in this document. By way of example, specific data used in support of various parts of this document came from both an indoor flat-belt type machine and outdoor over-the-road dynamometer. This document does not require a machine to match the ideal machine, but does require that a test machine?s performance be fully defined over its range of application. In this document, an ideal is a goal not a requirement.Ideal Machine An ideal machine is a machine which is capable of fully matching every item in this document. Such a machine neither exits at the time this document was written nor is it certain that the technology to build such a machine exists at this time.
Download or read book PASSENGER CAR TIRE PERFORMANCE REQUIREMENTS AND TEST PROCEDURES written by Highway Tire Committee and published by . This book was released on 1965 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and accompanying uniform laboratory test procedures for evaluating certain essential characteristics of new tires intended for use on passenger cars.(The requirements published in this SAE Recommended Practice pertain to tire sizes currently used on American passengre cars. For related information on older tire sizes and for those sizes used on import vehicles, contact Society of Automotive Engineers, Inc., Detroit Branch Office, 724 New Center Building, Detroit, Michigan 48202.).
Download or read book Wheels written by and published by . This book was released on 2016 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wheels Rims Military Vehicles Test Procedures and Performance Requirements written by Truck and Bus Wheel Committee and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of disc wheels, demountable rims, and bolt-together divided wheels intended for normal highway use on military trucks, buses, truck-trailers, and multipurpose vehicles. Users may establish design criteria exceeding the minimum performance requirement for added confidence in a design. For other (non-military) wheels and rims intended for normal highway use on trucks and buses, refer to SAE J267. For wheels intended for normal highway and temporary use on passenger cars, light trucks, and multipurpose vehicles, refer to SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, refer to SAE J1204. This document does not cover off-highway or other special application wheels and rims. This document has been revised to clarify procedures when manufacturer-specific data is available.
Download or read book Truck and Bus Tyres Method for Measuring Relative Wet Grip Performance Loaded New Tyres written by British Standards Institute Staff and published by . This book was released on 1911-08-31 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial road vehicles, Buses, Tyres, Road vehicles, Braking, Braking tests, Dynamic testing, Road holding, Friction tests, Testing conditions
Download or read book An Index of U S Voluntary Engineering Standards written by United States. National Bureau of Standards and published by . This book was released on 1971 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wheels Passenger Car and Light Truck Performance Requirements and Test Procedures written by Wheel Standards Committee and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides minimum performance requirements and uniform procedures for fatigue testing of wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose passenger vehicles. For heavy truck wheels and wheels used as duals, see SAE J267. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. These minimum performance requirements apply only to wheels made of materials included in Tables 1 to 4.
Download or read book Society of Automotive Engineers Handbook written by Society of Automotive Engineers, Incorporated and published by . This book was released on 1985 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Index of U S Voluntary Engineering Standards Supplement written by William J. Slattery and published by . This book was released on 1972 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Speed Test Procedure for Light Truck Tires written by Highway Tire Committee and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended Practice provides a method for testing the speed performance of light truck tires under controlled conditions in the laboratory on a test wheel. Not applicable.
Download or read book WHEELS RIMSTRUCKSTEST PROCEDURES AND PERFORMANCE REQUIREMENTS written by Truck and Bus Wheel Committee and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Recommended. Practice provides uniform laboratory procedures for fatigue testing certain production disc wheels, spoke wheels, and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose passenger vehicles. Standardized fatigue tests are yet to be developed for wheels/rims not covered in this recommended practice.
