Download or read book The Aerodynamics of Heavy Vehicles II Trucks Buses and Trains written by Fred Browand and published by Springer Science & Business Media. This book was released on 2008-09-30 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings for “The Aerodynamics of Heavy Vehicles II: Trucks, Buses and Trains” International Conference held in Lake - hoe, California, August 26-31, 2007 by Engineering Conferences International (ECI). Brought together were the world’s leading scientists and engineers from industry, universities, and research laboratories, including truck and high-speed train manufacturers and operators. All were gathered to discuss computer simu- tion and experimental techniques to be applied for the design of the more efficient trucks, buses and high-speed trains required in future years. This was the second conference in the series. The focus of the first conference in 2002 was the interplay between computations and experiment in minimizing ae- dynamic drag. The present proceedings, from the 2007 conference, address the development and application of advanced aerodynamic simulation and experim- tal methods for state-of-the-art analysis and design, as well as the development of new ideas and trends holding promise for the coming 10-year time span. Also - cluded, are studies of heavy vehicle aerodynamic tractor and trailer add-on - vices, studies of schemes to delay undesirable flow separation, and studies of - derhood thermal management.
Download or read book The Aerodynamics of Heavy Vehicles III written by Andreas Dillmann and published by Springer. This book was released on 2015-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future. This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings from the United Engineering Foundation Conference on The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held December 2-6, 2002, in Monterey, California. This Department of Energy, United Engineering Foundation, and industry sponsored conference brought together 90 leading engineering researchers from around the world to discuss the aerodynamic drag of heavy vehicles. Participants from national labs, academia, and industry, including truck manufacturers, discussed how computer simulation and experimental techniques could be used to design more fuel efficient trucks, buses, and trains. Conference topics included comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from the Department of Energy sponsored and other wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry were presented, along with their use in evaluating drag reduction devices. We would like to thank the UEF conference organizers for their dedication and quick response to sudden deadlines. In addition, we would like to thank all session chairs, the scientific advisory committee, authors, and reviewers for their many hours of dedicated effort that contributed to a successful conference and resulted in this document of the conference proceedings. We also gratefully acknowledge the support received from the United Engineering Foundation, the US Department of Energy, Lawrence Livermore National Laboratory, Volvo Trucks America, International Truck and Engine Corporation, and Freightliner LLC.
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2004-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the carefully edited contributions to the United Engineering Foundation Conference: The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held in Monterey, California from December 2-6, 2002. This conference brought together 90 leading engineering researchers discussing the aerodynamic drag of heavy vehicles. The book topics include a comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry are presented as well, along with their use in evaluating drag reduction devices.
Download or read book A Reassessment of Heavy Duty Truck Aerodynamic Design Features and Priorities written by Edwin J. Saltzman and published by . This book was released on 1999 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles
Download or read book Fairing Well written by Christian Gelzer and published by . This book was released on 2011 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles
Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles
Download or read book Quick Guide to Truck Aerodynamics written by Great Britain. Department of Transport and published by . This book was released on 2009 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The International Vehicle Aerodynamics Conference written by IMechE and published by Woodhead Publishing. This book was released on 2014-11-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics has never been more central to the development of cars, commercial vehicles, motorbikes, trains and human powered vehicles, driven by the need for efficiency: reducing carbon dioxide emissions, reducing fuel consumption, increasing range and alleviating problems associated with traffic congestion. Reducing vehicle weight makes it more challenging to ensure that they are stable and handle well over a wide range of environmental conditions. Lighter structures are also more vulnerable to aerodynamically induced vibration. Alongside this, customers demand an environment that is quiet, comfortable and maintains their vision of the world around them in all weathers. These aims must be met by designing vehicles that engage customers emotionally, promoting the brand values of manufacturers and operators. This can only be done by collaboration between designers and aerodynamicists. - Examine the latest developments in vehicle aerodynamic development - Explore opportunities to network and share experiences around different areas - Focus on future challenges and the engineering knowledge and technology required to resolve them - Discuss other areas of development including handling and stability, tyre aerodynamics and modelling, aeroacoustics and fluid structure interaction
Download or read book Progress in Vehicle Aerodynamics and Thermal Management written by Jochen Wiedemann and published by Springer. This book was released on 2017-12-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books presents latest information about new car developments, new or improved testing techniques and new or improved calculation procedures. Presenters are from industry and academia.
Download or read book Heavy Duty Truck Aerodynamics written by Richard A. Drollinger and published by . This book was released on 1987-01-01 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fairing Well written by Christian Gelzer and published by CreateSpace. This book was released on 2013-12 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two principle objectives to this monograph. The first is to bring long overdue attention to research done at NASA Dryden on truck aerodynamics, work not usually associated with the agency but results from which had and continue to have a direct benefit to the U.S. economy. The second is to use this case as on opportunity to tease apart some of the strands of the social fabric in technology's construction and adaptation, something not regularly done with NASA's technical work.
Download or read book Important Factors for Accurate Scale Resolving Simulations of Automotive Aerodynamics written by Petter Ekman and published by Linköping University Electronic Press. This book was released on 2020-04-02 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Road transports are responsible for almost 18 % of the greenhouse gas emission in Europe and are today the leading cause of air pollution in cities. Aerodynamic resistance has a significant effect on fuel consumption and hence the emission of vehicles. For electric vehicles, emissions are not affected by the aerodynamics as such but instead have a significant effect on the effective range of the vehicle. In 2017, a new measurement procedure was introduced, Worldwide Harmonized Light Vehicles Test Procedure (WLTP), for measuring emissions, fuel consumption, and range. This procedure includes a new test cycle with increased average driving speed compared to the former procedure, which thereby increases the importance of the aerodynamic resistance, as it drastically increases with speed. A second effect is that the exact car configuration sold to the customer needs to be certified in terms of fuel consumption and emissions. The result is that every possible combination of optional extras, which might affect the aerodynamic resistance, needs to be aerodynamically analyzed and possibly improved. From 2021, the European Commission will introduce stricter emission regulations for new passenger cars, with the fleet-wide average lowered to 95 grams CO2=km, which puts an even higher demand on achieving efficient aerodynamics. Virtual development of the aerodynamics of road vehicles is today used to a great extent, using Computational Fluid Dynamics, as it enables faster and cheaper development. However, achieving high accuracy for the prediction of the flow field and aerodynamic forces is challenging, especially given the complexity of both the vehicle geometry in itself and the surrounding flow field. Even for a simplified generic bluff body, accurately predicting the flow field and aerodynamic forces is a challenge. The main reason for this challenge of achieving results with high accuracy is the prediction of the complex behavior of turbulence. Scale-resolving simulation (SRS) methods, such as Large Eddy Simulation (LES), where most of the turbulent structures are resolved has in many studies shown high accuracy but unfortunately to a very high computational cost. It is primarily the small turbulent structures within the near-wall region that requires a _ne resolution in both space (the mesh) and in time. This fine resolution is the reason for the very high computational cost and makes LES unfeasible for practical use in industrial aerodynamic development at present and in the near future. By modeling the turbulent structures within the near-wall region using a Reynolds-Averaged Navier-Stokes (RANS) model, and resolving the turbulence outside the region with a LES model, a coarser resolution is possible to use, resulting in significantly lower computational cost. Which used RANS model is of high importance, and especially how much turbulent viscosity the model generates, as too high values can result in suppression of the resolved turbulence. The transitioning between the RANS and LES regions have a significant effect on the results. Faster transition enables more resolved turbulence, favorable for higher accuracy, but needs to be balanced with sufficient shielding of the RANS region. If resolving the turbulence occurs within the near-wall region, and the mesh is not sufficiently fine, it can result in poor accuracy. By increasing the time-step size and disregarding best-practice guides, the computational cost can be significantly reduced. The accuracy is reasonably insensitive to the larger time step sizes until a certain degree, thereby enabling computationally cheaper SRS to achieve high accuracy of aerodynamic predictions needed to meet present and future emission regulations.
Download or read book Proceedings of 2nd International Conference on Fluid Dynamics Aerodynamics 2017 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: October 19-20, 2017 Rome, Italy key Topics : Fluid Dynamics, Numerical Methods, CFD Methodology, Geophysical Fluid Dynamics, Heat Transfer System, Aerodynamics, Aero-acoustics, Magneto Hydrodynamics, Aerodynamics Simulations, Biofluid Mechanics, Thermo-Fluid Dynamics, Micro Fluidics,
Download or read book Truck and Bus Aerodynamic Device and Concept Terminology written by Truck and Bus Aerodynamics and Fuel Economy Committee and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE J2971 Recommended Practice Truck and Bus Aerodynamic Device Terminology document describes a standard naming convention of aerodynamic devices and technologies used to control aerodynamic forces on truck and buses weighing more than 10,000 pounds (including trailers). The existing SAE J1594, Vehicle Aerodynamics Terminology recommended practice does not address the terminology describing the set of vehicle aerodynamic devices used on Trucks and Buses. To address this limitation the Truck and Bus Aerodynamic and Fuel Economy Committee sponsored a Task Force to develop a Truck and Bus aerodynamic device terminology document.
