Download or read book Trimethylolpropane Production Process Cost Analysis TMP E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Trimethylolpropane (TMP) production from formaldehyde and n-butyraldehyde. In this process, formaldehyde and n-butyraldehyde go through a two-step reaction to form Trimethylolpropane and sodium formate. Unconverted formaldehyde is recovered from the reactor product solution, sodium formate is separated by means of a solvent extraction step and Trimethylolpropane is purified by distillation. This report was developed based essentially on the following reference(s): (1) "Alcohols, Polyhydric", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) US Patent 3183274, issued to Celanese in 1965 Keywords: TMP, polyhydric alcohol, polyether polyols, alkide resins

Download or read book Propionic Acid Production from Ethylene Cost Analysis PA E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propionic Acid production from ethylene and synthesis gas. In this process, propionaldehyde is formed by ethylene hydroformylation, and then converted to Propionic Acid via an oxidation reaction. This report was developed based essentially on the following reference(s): (1) "Oxo Synthesis," Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Propionic Acid and Derivatives," Ullmann's Encyclopedia of Industrial Chemistry, 2014 (3) US Patent 8492584 issued to BASF in 2013 Keywords: Propanoic Acid, Ethene, Propanal, Oxo Reaction, Hydroformylation

Download or read book Maleic Anhydride Production from Butane Cost Analysis MAN E11A written by Intratec and published by Intratec Solutions. This book was released on with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Maleic Anhydride production from butane via partial oxidation process. The process examined is similar to the one owned by Huntsman. In this process, Maleic Anhydride is produced by the partial oxidation reaction of n-butane with oxygen carried out in a fixed-bed reactor. The reactor effluent is sent to a solvent-based recovery system for Maleic Anhydride separation. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 4118403 issued to Monsanto in 1978 (assigned to Huntsman in 1994); (2) US Patent 6090245, issued to Huntsman in 2000 Keywords: Fixed Bed, Maleic Acid Anhydride, C4 Oxidation, Huntsman, Monsanto

Download or read book Methyl Chloride Production Process Cost Analysis Methyl Chloride E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Chloride production from methanol and hydrogen chloride The process examined is a typical catalytic vapor phase process. In this process, methanol and anhydrous HCl are combined in vapor phase and passed through a catalyst bed. Reactor vapor outlet is quenched, dried by sulfuric acid scrubbing and then purified to generate high-purity Methyl Chloride. This report was developed based essentially on the following reference(s): (1) "Chloromethanes", Ullmann's Encyclopedia of Industrial Chemistry, 2012; (2) Handbook of Industrial Chemistry and Biotechnology, 2012 Keywords: Chloromethane, R-40, HCC-40, chlorosilanes production

Download or read book Trichlorfon Production Cost Analysis Trichlorfon E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Trichlorfon production from dimethyl hydrogen phosphite and chloral. In this typical process examined, dimethyl hydrogen phosphite reacts with chloral producing Trichlorfon. This report was developed based essentially on the following reference(s): Keywords: DEP, Metrifonate, DMP, Trichloroacetaldehyde

Download or read book Hydroxymethylfurfural Production Process Cost Analysis HMF E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of an early stage process for Hydroxymethylfurfural (HMF) production from glucose syrup. The process examined is similar to the one proposed by the University of Wisconsin-Madison. In this process, glucose is isomerized to fructose, which is then converted to Hydroxymethylfurfural (HMF). This report was developed based essentially on the following reference(s): US Patent 20080033188, issued to Wisconsin Alumni Research Institute in 2008 Keywords: Glucose Isomerization, Dehydration, Biphasic Reactor

Download or read book Pentaerythritol Production Process Cost Analysis PER E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Pentaerythritol (PER) production from acetaldehyde and formaldehyde. In this process, formaldehyde and acetaldehyde go through a two-step reaction to form Pentaerythritol and sodium formate. The reactor product solution is sent to an evaporator and a trayed column for unconverted formaldehyde removal and concentration of the solution. The concentrated solution is then crystallized, dried and sent to storage. This report was developed based essentially on the following reference(s): Keywords: PER, polyol, neopolyol esters

Download or read book Ethylene Oxide Production from Ethylene Cost Analysis EO E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Oxide production from ethylene. The process examined is a typical direct oxidation process. In the process examined, pure oxygen is used as the oxidizing agent. This report was developed based essentially on the following reference(s): "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Dow Meteor, Shell Master, Scientific Design

Download or read book Modified Asphalt written by Jose Luis Rivera Armenta and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt modification is an important area in the development of new road and pavement materials. There is an urgent demand for road materials that can minimize fracture at low temperatures and increase resistance to deformation at high temperatures. The function of asphalt is to bind aggregate to protect it from water and other harmful agents. In the beginning asphalt was ideal for this purpose, but recently traffic loads have increased and environmental factors have deteriorated more rapidly than before. Asphalt is a byproduct of crude oil in the refining process, and it is considered a complex heterogeneous mixture of hydrocarbons. Asphalt modification has become an important research area, using several methods and new materials as modifiers.

Download or read book 3D Printing in Oral Maxillofacial Surgery written by Lobat Tayebi and published by Springer Nature. This book was released on 2021-08-24 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.

Download or read book Paint and Coating Testing Manual written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book katowice in your pocket written by and published by In Your Pocket. This book was released on with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Computer aided Design and Manufacturing written by Farid M. L. Amirouche and published by Prentice Hall. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Computer-Aided Design and Manufacturingis the product of many years of experience teaching courses in computer-aided design (CAD). My first book, published in 1991, was a challenge—the technology was evolving and both the hardware and software were changing rapidly. Since then we have come a long way in the CAD/CAM area, and the prospects are even better for future intelligent systems that will enable engineers to design engineering products more efficiently. From design to development, we are attaining some great achievements that will engineer products that are more competitive and ready to meet the market needs. In essence, CAD will provide the engineer more time for the creative aspects in terms of concept formulation and interpretation of the results derived from the analysis. The tools of CAD/CAM are now more standardized and most of our students today come equipped with the basic engineering graphics knowledge needed to learn advanced engineering tools. Having gone through the experience of teaching this course and at the same time trying to adapt to the changing needs in the laboratory, I have written this book under the premise of providing the students the fundamentals needed to advance their understanding of design, analysis, and product development in manufacturing. The latter is achieved through selection of appropriate topics and analytical methods in all aspects of design that are pertinent to CAD with the hope that students will embrace them with conviction. These topics are written in a clear and concise form, and are followed by examples to guide the students and engineers through a wonderful learning experience. The thrust behind learning and teaching CAD is the ability to reach a level of confidence that will enable oneself to interact with ease with the existing CAD systems to solve engineering problems. My philosophy is to teach through examples; hence, every topic covered is followed by examples to demonstrate the concepts. The basic engineering concepts learned in this book are independent of any specific software. We are at a stage now in which CAD/CAM does not necessary have to be self-contained. Rather, students should be able to use other tools to link or provide additional information as necessary to the CAD system. Where some topics could be supplemented, I have taken the liberty in this textbook of allowing the students to perform their exercises using MATLAB for the sake of understanding that CAD is a multidiscipline in nature and some parts of the design or analysis can be programmed in other languages. This is becoming a common practice as vendors are making it simpler and easier to transport files from different systems, and in some cases even be able to integrate different analysis tools to provide the students and engineers the ability to interact with their software to meet their engineering needs. This is certainly true in the variational design and parametric designs areas in which engineering equations are the engine behind the geometrical formulation and design of certain products. This textbook is written to satisfy the CAD requirements courses even though finite element coverage expands beyond the introduction of truss analysis. It is difficult to cover all topics in one semester. Topics should be selected to meet the course needs and the laboratory requirements that go with it. For example, at the University of Illinois at Chicago, we have a required laboratory part of the course where students are given different projects on weekly basis to become proficient in the use of CAD software such as ProE or IDEAS. The last lab projects are more involved and usually require some forms of analysis and animation. My intention is to provide additional topics in finite elements that will allow the instructor to focus not only on simple trusses but also be able to teach heat conduction, basic principles in FEM, and even vibration to broaden the scope of analysis. The idea is one that allows our senior students to be exposed to FEM by combining most of what they have learned and show how it can be done with the help of this powerful technique of FEM. This has been very successful with our undergraduate students and first-year graduate students because they are able to use this textbook to learn the basic concepts required in analysis to be able to use finite element tools such as ANSYS, IDEAS, and CATIA, among others. The book is divided into 15 chapters and provides a unique balance of topics that cover design, 3D transformation and geometry manipulation, surface creations, solid modeling, optimization, finite elements, robotics and robot economics, and CAM implementation. Chapter 1 provides a historical perspective of CAD and discusses virtual reality as it is used in our current engineering environment (the latter is a topic that will need to be explored further down the road). Chapter 2 addresses the different stages in design and provides concrete examples showing how these steps can be accomplished. The unique feature of this chapter is the parametric and variational design concept. In this textbook I have made an effort to enlighten the students with the need for these techniques to be taken seriously as they might become standard in the near future. The blending of man and machine is an effective tool when CAD systems are allowed to participate in the design and manufacturing process by aiding in the problem formulation, synthesis, conceptualization, and, of course, analysis. Once the students have had some exposure to CAD in general, Chapter 2 could be covered at any part of the course. I urge the instructors and readers to take the time and go over these examples and to create their own examples to appreciate the benefits of these tools. Chapter 3 discusses 2D and 3D transformations and geometry manipulation, and provides an in-depth analysis of images in 2D and 3D, and includes isometric views. Chapter 4 explains the fundamentals underlying splines, parametric and nonparametric curves, and Bezier curves and surfaces. A number of examples are included to assist the students in understanding how the concepts are implemented. Depending on how advanced the students are, selected topics can be skipped or simply assigned as additional material for the class. Chapter 5 introduces the concept of solid modeling and the various construction techniques and representation schemes in modeling. The students will apply some of these concepts in their lab work working with the making of solid models in CAD. Chapter 6 covers various techniques of optimization and introduces the students to the basic concepts of how to formulate an objective function, define the appropriate constraints, and choose the analytical tools to solve the problem. This chapter also focuses on popular techniques in optimization so that senior students and first-year graduate students will have some familiarity with their use. Chapters 7 through 10 form a unique combination of teaching the finite element method to our junior and senior students without the burden of heavy calculus. It is one of the major strengths of this textbook. If a curriculum is more focused on analysis, all chapters can be covered; otherwise, the instructor is given the choice of covering FEM by selecting the appropriate topics) for the class. This would include stress analysis, heat conduction, dynamic analysis, and vibration, or simply teaching the basic formulation of FEM as described in Chapter 7. The examples solved in these chapters represent real applications and will encourage the students to develop a good appetite for FEM. Computer-aided manufacturing is introduced in Chapters 11 through 15. I have opted to focus on key topics of interest to the students such as robotics and economic impact, group technology, and computer-integrated manufacturing. These are some of the features that need to be understood in the integration of CAD and CAM. Principles of Computer-Aided Design and Manufacturingis written for junior and senior level students and first-year graduate students who have had little exposure to computer-aided design. This textbook assumes that the students have some experience with programming and understand basic concepts in CAD found in a freshman course of graphics. This textbook is suitable for students who have had all their undergraduate requirements in their major. The latter is an incentive whereby students will fully appreciate the benefits of design techniques such as parametric and variational design and develop a deep understanding of how FEM works and how it is applied to various engineering applications. I am indebted to the reviewers for their useful comments and suggestions, which helped shape the content and focus of this book: Dr. Heana Costea, California State University at Northridge; Derek M. Yip-Hoi, University of Michigan at Ann Arbor; and Gregory Kremer, Ohio State University. I would also like to thank Dr. M. Ayub, visiting professor in the Civil Engineering Department at University of Chicago at Illinois, for taking the time to edit several chapters and provide his insight for the book and M. Arif, associate professor in the Civil Engineering Department at University of Chicago at Illinois, for his encouragement and support. The comments and suggestions of the reviewers were instrumental in my final revision and in selecting additional topics that were missing from the original proposal. They kindly helped review my original manuscript and assisted me in looking at their course focus and syllabus to get a better picture of how the CAD course is taught at their respective institutions. Finally, I am indebted to all my students who have assisted me in the preparation of necessary materials for this book; without their help, this wouldn't have been possible. In particular, I would like to thank Carlos Lopez for his efforts on the parametric and variational designs section of the book. I also like to thank Francisco Romero, Nagarajan Chandra, Pedro Gonzalez, and David McNeil for their genuine effort in assisting with some of the graphics of the book. I would like to thank Nikhil Khulka and Ivan Zivkovic for being there when I needed them the most to meet the publisher deadlines and organize the chapters and figures selected for the book. I also would like to thank Surya Pratar for helping with indexing of this book. Finally, let me take this opportunity to thank the editorial staff, Dorothy Marrero, David George, and Lynda Castillo at Prentice Hall, for their patience during the course of the production of the book. I had the pleasure of working closely with Kevin Bradley at Sunflower Publishing Services, who oversaw the complete publication of the book. He was kind and very responsive to all my questions. He worked intelligently to make sure I was happy with the changes and the editing of my book. At the end I would like to thank my family, Ginger, Larby, and Anissa, for their unconditional love and support and for their understanding in the sacrifices we make in achieving our objectives. In particular, I would like to thank my mom and dad for giving me hope, guidance, and values to treasure for years to come. FARID AMIROUCHE The Department of Mechanical & Industrial Engineering University of Illinois, Chicago

Download or read book Stereolithography written by Paulo Jorge Bártolo and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereolithography: Materials, Processes and Applications will focus on recent advances in stereolithography covering aspects related to the most recent advances in the field, in terms of fabrication processes (two-photon polymerization, micro-stereolithography, infrared stereolithography and stereo-thermal-lithography), materials (novel resins, hydrogels for medical applications and highly reinforced resins with ceramics and metals), computer simulation and applications.

Download or read book White Pigments written by Juergen H. Braun and published by . This book was released on 2012 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: ALMOST EVERYTHING MANMADE THAT IS WHITE or light in color contains white pigment in its surface: houses inside and outside, industrial articles, plastics, glazes, rubber, printed surfaces, many paper products, and even some foods. Only papers and textiles can be white without pigment. Virtually all this whiteness and lightness is supplied by titanium dioxide (TiO2) pigments. Void pigments make a minor contribution. The classic white pigmentslithopone, zinc sulfide, and the white leadshave essentially disappeared from commerce because TiO2 pigments perform much better, are much cheaper, and are nontoxic. Zinc oxide is still added to some paints as a mildewstat, but not for use as a white pigment. TiO2 pigments are manufactured by a major, globally distributed industry. Its products are sold for many applications; however, more than half of all white pigment goes into paints. In many coatings, white pigment is the single most expensive ingredient. To select the right pigment grade and use it well is an important challenge to the paint manufacturer. This chapter will familiarize coating manufacturers with white pigments and help them understand their options for selection, utilization, and testing. Toward this objective, I will first outline the commerce and manufacture of white pigments and then discuss their function, the substances that serve this function, and the commodities available. I will distinguish between product characteristics that describe the pigment itself and product performance, which are properties of paint films, that is, systems composed of pigment and binder.

Download or read book Cosmetic Dermatology written by Cheryl M. Burgess and published by Springer Science & Business Media. This book was released on 2005-02-16 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the dermatologist with the essential information needed to properly treat all skin types cosmetically. All chapters have been written by female dermatologists with many years of personal experience in the field. The volume includes an overview of the systemic, intrinsic and extrinsic aging process, essential information on anti-aging skin care product ingredients, detailed discussions of patient selection and indications, and a wide range of cosmetic procedures. This concise book allows you - through its well-organized use of sidebars, photographs and illustrations - to extract any information you may need quickly and easily.

Download or read book Radiation Curing of Coatings written by J. V. Koleske and published by ASTM International. This book was released on 2002-01-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology that deals with using the substrate as your polymerization vessel will be described in detail, but in an understandable manner, in this book. Reading it will give one a good understanding of this topic and enough knowledge to begin formulating radiation-curable inks, coatings, and sealants.