Download or read book Toxicological Risks of Selected Flame Retardant Chemicals written by National Research Council and published by National Academies Press. This book was released on 2000-07-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ignition of upholstered furniture by small open flames from matches, cigarette lighters, and candles is one of the leading causes of residential-fire deaths in the United States. These fires accounted for about 16% of civilian fire deaths in 1996. On average, each year since 1990, about 90 deaths (primarily of children), 440 injuries, and property losses amounting to 50 million dollars have resulted from fires caused by the ignition of upholstered furniture by small open flames. Certain commercial seating products (such as aircraft and bus seats) are subject to flammability standards and sometimes incorporate FR-treated upholstery cover materials, but there is no federal-government requirement for residential upholstered furniture, and it is generally not treated with FR chemicals. It is estimated that less than 0.2% of all U.S. residential upholstery fabric is treated with flame-retardant (FR) chemicals. The Consumer Product Safety Act of 1972 created the U.S. Consumer Product Safety Commission (CPSC) as an independent federal regulatory agency whose mission is to protect the public from unreasonable risks of injury and death associated with consumer products. CPSC also administers the Flammable Fabrics Act, under which it regulates flammability hazards and the Federal Hazardous Substances Act (FHSA), which regulates hazardous substances including chemicals. In 1993, the National Association of State Fire Marshals petitioned CPSC to issue a performance-based flammability standard for upholstered furniture to reduce the risk of residential fires. The Commission granted that portion of the petition relating to small open flame ignition risks. In response to concerns regarding the safety of FR chemicals, Congress, in the fiscal year 1999 appropriations report for CPSC, requested that the National Research Council conduct an independent study of the health risks to consumers posed by exposure to FR chemicals that are likely to be used in residential upholstered furniture to meet a CPSC standard. The National Research Council assigned the project to the Committee on Toxicology (COT) of the Commission on Life Sciences' Board on Environmental Studies and Toxicology. COT convened the Subcommittee on Flame-Retardant Chemicals, which prepared this report. Subcommittee members were chosen for their recognized expertise in toxicology, pharmacology, epidemiology, chemistry, exposure assessment, risk assessment, and biostatistics. Toxicological Risks of Selected Flame-Retardant Chemicals is organized into 18 chapters and two appendices. Chapter 2 describes the risk assessment process used by the subcommittee in determining the risk associated with potential exposure to the various FR chemicals. Chapter 3 describes the method the subcommittee used to measure and estimate the intensity, frequency, extent, and duration of human exposure to FR chemicals. Chapters 4-19 provide the subcommittee's review and assessment of health risks posed by exposure to each of the 16 FR chemicals. Data gaps and research needs are provided at the end of these chapters.

Download or read book Tricresyl Phosphate written by and published by . This book was released on 1990 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluates risks to human health and the environment posed by the production and use of tricresyl phosphate. Tricresyl phosphate is used in industry as a plasticizer in vinyl plastic manufacture, as a flame-retardant, as a solvent for nitrocellulose, in cellulosic molding compositions, and in the manufacture of fire-resistant hydraulic fluids and lubricants. Because of the physico-chemical properties of tricresyl phosphate and its rapid biodegradation, the report concludes that use of the compound does not threaten the environment, though there is some evidence that crop plants can be affected by tri-o-cresyl phosphate released from plastic coverings. A section devoted to kinetics and metabolism concentrates on mechanisms of absorption, distribution, metabolism, and elimination that can help explain the well-documented neuropathic actions of tricresyl phosphate and, most notably, its highly toxic isomer, tri-o-cresyl phosphate. The most extensive section assesses findings from toxicity studies, emphasizing the large number of studies documenting neurotoxic effects, often at very low doses. These effects are further characterized through a review of the numerous reported cases of large-scale human poisoning following the ingestion of accidentally or deliberately contaminated medicines and foodstuffs. Readers are given detailed information on the clinical symptoms of poisoning, the characteristics of delayed neuropathy, long-term prognosis, and advice on the first-aid treatment of victims. While the concluding section notes that use of tricresyl phosphate poses very little risk to either the environment or the general population, the report underscores the severity and long-duration of the neuropathology caused by accidental poisoning, noting that some victims never recover.

Download or read book Encyclopaedia of Occupational Health and Safety written by Jeanne Mager Stellman and published by International Labour Organization. This book was released on 1998 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Tricresyl Phosphate TCP as an Additive on Wear of Iron Fe written by and published by . This book was released on 1987 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flame Retardants 101 written by Frca and published by CRC Press. This book was released on 1998-01-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Acid Passivation Tricresyl Phosphate Presoak and UV Ozone Treatment on the Tribology of Perfluoropolyether Lubricated 440C Stainless Steel Couples written by and published by . This book was released on 2001 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2003-01-29 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the design of cost-effective, environmentally friendly lubricant additive technologies and components for the automotive, industrial, manufacturing, food, and aerospace industries. Presenting methods to improve the performance and stability of lubricants, protect metal surfaces against wear, and to control deposits and contaminant

Download or read book Handbook of Green Chemicals written by Michael Ash and published by Synapse Info Resources. This book was released on 2004 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 7000 trade name products and more than 2500 generic chemicals that can be used in formulations to meet envionmental concerns and government regulations. This reference is designed to serve as an essential tool in the strategic decision-making process of chemical selection when focusing on human and environmental safety factors.Industries Covered: Adhesives ? Refrigerants ? Water Treatment ? Plastics ? Rubber ? Surfactants ? Paints & Coatings ? Food ? PharmaceuticalsCosmetics ? Petroleum Processing ? Metal Treatment ? TextilesThe chemicals and materials included are used in every aspect of the chemical industry. The reference is organized so that the reader can access the information based on the trade name, chemical components, functions and application areas, 'green' attributes, manufacturer, CAS number, and EINECS/ELINCS number.It contains a unique cross-reference that groups the trade name chemicals by one or more of these green chemical attributes: Biodegradable ? Environmentally Safe ? Environmentally Friendly ? Halogen-Free ? HAP's-Free ? Low Global WarmingLow Ozone-Depleting ? Nonozone-Depleting ? Low Vapor Pressure ? Noncarcinogenic ? Non-CFC ? Non-HCFCNonhazardous ? Nontoxic ? Recyclable ? SARA-Nonreportable ? SNAP (Significant New Alternative Policy) CompliantVOC-Compliant ? Low-VOC ? VOC-Free

Download or read book Synthetic Lubricants And High Performance Functional Fluids Revised And Expanded written by Leslie R. Rudnick and published by CRC Press. This book was released on 1999-03-10 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers state-of-the-art information on all the major synthetic fluids, describing established products as well as highly promising experimental fluids with commercial potential. This second edition contains chapters on polyinternalolefins, polymer esters, refrigeration lubes, polyphenyl ethers, highly refined mineral oils, automotive gear oils and industrial gear oils. The book also assesses automotive, industrial, aerospace, environmental, and commercial trends in Europe, Asia, South America, and the US.

Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.

Download or read book The Airliner Cabin Environment and the Health of Passengers and Crew written by National Research Council and published by National Academies Press. This book was released on 2002-02-03 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although poor air quality is probably not the hazard that is foremost in peoples' minds as they board planes, it has been a concern for years. Passengers have complained about dry eyes, sore throat, dizziness, headaches, and other symptoms. Flight attendants have repeatedly raised questions about the safety of the air that they breathe. The Airliner Cabin Environment and the Health of Passengers and Crew examines in detail the aircraft environmental control systems, the sources of chemical and biological contaminants in aircraft cabins, and the toxicity and health effects associated with these contaminants. The book provides some recommendations for potential approaches for improving cabin air quality and a surveillance and research program.

Download or read book Surface effects in adhesion friction wear and lubrication written by Donald H. Buckley and published by Elsevier. This book was released on 1981-01-01 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface effects in adhesion, friction, wear, and lubrication

Download or read book NIOSH Manual of Analytical Methods written by Peter M. Eller and published by DIANE Publishing. This book was released on 1994-06 with total page 1448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flame Retardant Polymeric Materials written by Eli Pearce and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flammability has been recognized as an increasingly important social and scientific problem. Fire statistics in the United States (Report of the National Commission on Fire Prevention and Control. "America Burning:' 1973) emphasized the vast devastation to life and property--12.000 lives lost annually due to fire. and these deaths are usually caused by inhaling smoke or toxic gases: 300.000 fire injuries: 11.4 billion dollars in fire cost at which 2.7 billion dollars is related to property loss: a billion dollars to burn injury treatment: and 3.3 billion dollars in productivity loss. It is obvious that much human and economic misery can be attributed to fire situations. In relation to this. polymer flammability has been recognized as an in creasingly important social and scientific problem. The development of flame-retardant polymeric materials is a current example where the initia tive for major scientific and technological developments is motivated by sociological pressure and legislation. This is part of the important trend toward a safer environment and sets a pattern for future example. Flame retardancy deals with our basic everyday life situations-housing. work areas. transportation. clothing and so forth-the "macroenvironment" capsule within which "homosapiens" live. As a result. flame-retardant polymers are now emerging as a specific class of materials leading to new and diversified scientific and technological ventures.

Download or read book Polymer Technology Dictionary written by Tony Whelan and published by Springer Science & Business Media. This book was released on 1994 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive encyclopaedic dictionary on polymer technology with expanded entries - trade name and trade marks, list of abbreviations and property tables.

Download or read book Occupational Industrial and Environmental Toxicology written by Michael I. Greenberg and published by Elsevier Health Sciences. This book was released on 2003-01-01 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text's format makes it easy to diagnose and treat occupational toxicology patients, whether they know the substance of their exposure or not. Organized by occupation, industry, and environment, it covers what agents are plausible for exposure, systemic effects, and suggested treatments. Covers everything needed to understand, diagnose, treat and refer patients of toxic exposure.Provides a chemical agent cross-referencing system.Contains photographs from the Bettmann archives of historical photographs.Addition of new Associate Editor: Gayla McCluskey, CIH - President of the American Industrial Hygiene Association. Revises and updates all chapters with the latest information.Features 25 new chapters.Includes new contributors and new illustrations.

Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.