Download or read book Tribology written by Horst Czichos and published by . This book was released on 1978 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology a systems approach to the science and technology of friction lubrication and wear written by and published by Elsevier. This book was released on 2009-06-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology: a systems approach to the science and technology of friction, lubrication, and wear
Download or read book Engineering Tribology written by G.W. Stachowiak and published by Butterworth-Heinemann. This book was released on 1993-06-30 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interdisciplinary nature of tribology encompasses knowledge drawn from disciplines such as mechanical engineering, materials science, chemistry and physics. The interaction between these different fields of knowledge to achieve the final result, the control of friction and wear, is reviewed in this volume. This interdisciplinary approach has proven to be a very successful way of analysing friction and wear problems. In many cases tribology is viewed as an inaccessible subject which does not produce useful answers. In this volume the authors redress this problem by providing a comprehensive treatment of the subject. A basic feature of the book is the emphasis on describing various concepts in an accessible manner for the benefit of non-specialists. This principle is applied from the beginning of the book, where the reader is introduced to the fundamental concept of tribology. This concept is then often used to show how the various topics in tribology are interrelated to form one coherent subject. A direct graphical illustration of the mechanisms controlling tribological phenomena is presented. Carefully prepared diagrams allow rapid appreciation of the basic ideas and facts in tribology. The numerical analysis of hydrodynamic lubrication is supported by a number of computer programs which are included in the book. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is analyzed together with the methods of coatings deposition. The book contains 474 figures and 44 tables. More than 1000 references are provided to give the reader access to more specialized information if required. The volume is intended to provide graduates in engineering or materials science with an understanding of the fundamental concepts of friction, wear and lubrication.
Download or read book Friction Wear Lubrication written by Kenneth C Ludema and published by CRC Press. This book was released on 1996-06-21 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of Kenneth C Ludema's 35 years of teaching and research, Friction, Wear, Lubrication: A Textbook in Tribology presents a broad view of the many aspects of tribology. All major aspects of this discipline are included, from mechanical to materials to chemical to mechanics. Ludema's key research areas - marginally lubricated wear and friction - will be of special interest to readers who would like to find reliable and useful data on friction and wear rates. Written primarily as a text/reference, this informative volume describes how to solve design problems in friction and wear. By applying close and informed observation of presently operating tribological systems, along with careful design of simulative tests, readers can develop their own conclusions of tribological results. This book is intended to bring everyone solving problems in friction and wear to the same understanding of what is (and what is not) involved in this exciting field. Seniors and graduate students, as well as practicing engineers employed in a wide range of industries will find this book to be an essential and practical resource.
Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford University Press. This book was released on 2008 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book explains how these tribological phenomena originate from atomistic and microscale physical phenomena and shows how this understanding can be used to solve macroscale tribology problems. The book is intended to serve both as a textbook for advanced undergraduate and graduate courses in tribology and as an introduction to the field for those scientists and engineers working with technologies where a good grasp of tribology is essential.
Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Download or read book Tribology and Dynamics of Engine and Powertrain written by Homer Rahnejat and published by Elsevier. This book was released on 2010-09-30 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology, the science of friction, wear and lubrication, is one of the cornerstones of engineering’s quest for efficiency and conservation of resources. Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends provides an authoritative and comprehensive overview of the disciplines of dynamics and tribology using a multi-physics and multi-scale approach to improve automotive engine and powertrain technology. Part one reviews the fundamental aspects of the physics of motion, particularly the multi-body approach to multi-physics, multi-scale problem solving in tribology. Fundamental issues in tribology are then described in detail,from surface phenomena in thin-film tribology, to impact dynamics, fluid film and elastohydrodynamic lubrication means of measurement and evaluation. These chapters provide an understanding of the theoretical foundation for Part II which includes many aspects of the physics of motion at a multitude of interaction scales from large displacement dynamics to noise and vibration tribology, all of which affect engines and powertrains. Many chapters are contributed by well-established practitioners disseminating their valuable knowledge and expertise on specific engine and powertrain sub-systems. These include overviews of engine and powertrain issues, engine bearings, piston systems, valve trains, transmission and many aspects of drivetrain systems. The final part of the book considers the emerging areas of microengines and gears as well as nano-scale surface engineering. With its distinguished editor and international team of academic and industry contributors, Tribology and dynamics of engine and powertrain is a standard work for automotive engineers and all those researching NVH and tribological issues in engineering. Reviews fundamental aspects of physics in motion, specifically the multi-body approach to multi physics Describes essential issues in tribology from surface phenomena in thin film tribology to impact dynamics Examines specific engine and powertrain sub-systems including engine bearings, piston systems and value trains
Download or read book Industrial Tribology written by M.H. Jones and published by Elsevier. This book was released on 1983-03-01 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Tribology
Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational
Download or read book Handbook of Lubrication and Tribology written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental protection. This second edition provides a thorough treatment of established knowledge and practices, along with detailed references for further study. Written by the foremost experts in the field, the book is divided into four sections. The first reviews the basic principles of tribology, wear mechanisms, and modes of lubrication. The second section covers the full range of lubricants/coolants, including mineral oil, synthetic fluids, and water-based fluids. In the third section, the contributors describe many wear- and friction-reducing materials and treatments, which are currently the fastest growing areas of tribology, with announcements of new coatings, better performance, and new vendors being made every month. The final section presents components, equipment, and designs commonly found in tribological systems. It also examines specific industrial areas and their processes. Sponsored by the Society of Tribologists and Lubrication Engineers, this handbook incorporates up-to-date, peer-reviewed information for tackling tribological problems and improving lubricants and tribological systems. The book shows how the proper use of generally accepted tribological practices can save money, conserve energy, and protect the environment.
Download or read book Friction Lubrication and Wear written by Mohammad Asaduzzaman Chowdhury and published by BoD – Books on Demand. This book was released on 2019-10-30 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology has rapidly expanded in recent years as the demand for improved materials has increased. The good function of numerous electrical, electrochemical, mechanical, and biological systems or components depends on suitable friction, lubrication, and wear as well as tribological values. In this context, the study of friction, wear, and lubrication is of tremendous pragmatic importance. The reduction of friction and loss of materials in relative motion are important challenges to improveing energy efficiency. This book guides the rational design of material for technological application. Chapters cover topics such as the resistance of dry abrasive wear, the role of a brand-new additive in the minimization of friction and wear, the structural-energy model of elastic-plastic deformation, the influence of micro-abrasive wear modes, tribological characteristics of magneto-rheological fluids (MRFs) and magneto-rheological elastomers (MREs), and different treatment technologies to improve tribological properties, among others.
Download or read book Tribology for Scientists and Engineers written by Pradeep L. Menezes and published by Springer Science & Business Media. This book was released on 2013-12-04 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.
Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford University Press. This book was released on 2019-08-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book incorporates a bottom-up approach to friction, lubrication, and wear into a versatile textbook on tribology. This is done by focusing on how these tribological phenomena occur on the small scale — the atomic to the micrometer scale — a field often called nanotribology. The book covers the microscopic origins of the common tribological concepts of roughness, elasticity, plasticity, friction coefficients, and wear coefficients. Some macroscale concepts (like elasticity) scale down well to the micro- and atomic-scale, while other macroscale concepts (like hydrodynamic lubrication) do not. In addition, this book also has chapters on topics not typically found in tribology texts: surface energy, surface forces, lubrication in confined spaces, and the atomistic origins of friction and wear. These chapters cover tribological concepts that become increasingly important at the small scale: capillary condensation, disjoining pressure, contact electrification, molecular slippage at interfaces, atomic scale stick-slip, and atomic bond breaking. Throughout the book, numerous examples are provided that show how a nanoscale understanding of tribological phenomena is essential to the proper engineering of important modern technologies such as MEMS, disk drives, and nanoimprinting. For the second edition, all the chapters have been revised and updated to incorporate the most recent advancements in nanoscale tribology. Another important enhancement to the second edition is the addition of problem sets at the end of each chapter.
Download or read book Friction and Wear of Materials written by Ernest Rabinowicz and published by Wiley-Interscience. This book was released on 1995 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and Wear of Materials Second Edition Written by one of the world’s foremost authorities on friction, this classic book offers a lucid presentation of the theory of mechanical surface interactions as it applies to friction, wear, adhesion, and boundary lubrication. To aid engineers in design decisions, Friction and Wear of Materials evaluates the properties of materials which, under specified conditions, cause one material to function better as a bearing material than another. Featured also are thorough treatments of lubricants and the sizes and shapes of wear particles. This updated Second Edition includes new material on erosive wear, impact wear, and friction. Professor Rabinowicz’s book will be especially welcomed by mechanical and design engineers, surface scientists, tribologists and others who design, produce and operate products, machines and equipment which involve friction and its effects.
Download or read book Principles and Applications of Tribology written by Desmond F. Moore and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Tribology provides a mechanical engineering perspective of the fundamental understanding and applications of tribology. This book is organized into two parts encompassing 16 chapters that cover the principles of friction and different types of lubrication. Chapter 1 deals with the immense scope of tribology and the range of applications in the existing technology, and Chapter 2 is devoted entirely to the evaluation and measurement of surface texture. Chapters 3 to 5 present the fundamental concepts underlying the friction of metals, elastomers, and other materials. The principles of hydrodynamic lubrication are briefly discussed in Chapter 6, and the mechanisms of boundary and elastohydrodynamic lubrication are examined in Chapters 7 and 8. Chapter 9 is a generalized treatise on wear and abrasion phenomena in metals and elastomers, whereas Chapter 10 deals with the internal friction in solids, liquids, and gases. Chapter 11 is an abbreviated yet thorough treatment of experimental methods used in tribological studies. The remaining five chapters in this book are devoted to specific applications, including manufacturing processes, automotive applications, transportation, locomotion, bearing design, and miscellaneous. This book is an ideal source for mechanical engineering students.
Download or read book Friction Wear Lubrication written by Kenneth C Ludema and published by CRC Press. This book was released on 1996-06-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of Kenneth C Ludema's 35 years of teaching and research, Friction, Wear, Lubrication: A Textbook in Tribology presents a broad view of the many aspects of tribology. All major aspects of this discipline are included, from mechanical to materials to chemical to mechanics. Ludema's key research areas - marginally lubricated wear and friction - will be of special interest to readers who would like to find reliable and useful data on friction and wear rates. Written primarily as a text/reference, this informative volume describes how to solve design problems in friction and wear. By applying close and informed observation of presently operating tribological systems, along with careful design of simulative tests, readers can develop their own conclusions of tribological results. This book is intended to bring everyone solving problems in friction and wear to the same understanding of what is (and what is not) involved in this exciting field. Seniors and graduate students, as well as practicing engineers employed in a wide range of industries will find this book to be an essential and practical resource.
Download or read book Friction and Wear of Polymer Composites written by Klaus Friedrich and published by Elsevier. This book was released on 2012-12-02 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a useful summary of current knowledge on the friction and wear properties of composite materials, this book fills the gap between publications on fundamental principles of tribology and those on the friction and wear behavior of metals and polymers. Detailed coverage is given of: the fundamental aspects of tribology in general and polymer composites in particular; the effects of the microstructure of composites on friction and wear behavior under different external loading conditions; and the problem of the control of friction and wear behavior in practical situations. Although emphasis is on polymer composites associated with bearing-type applications, part of the book is also devoted to the friction and wear of metal-based composites and rubber compounds. The data are represented in the form of 277 figures, diagrams and photographs, and 68 tables. The author index covers more than 670 references, and the subject index more than 1,000 keywords. The book will be of particular interest to: those involved in research on some aspects of polymer composites tribology (material scientists, physical chemists, mechanical engineers); those wishing to learn more methods for solving practical friction or wear problems (designers, engineers and technologists in industries, dealing with selection, reprocessing and application of polymer engineering materials); and teachers and students at universities.
