Download or read book Basic Engineering Plasticity written by David Rees and published by Elsevier. This book was released on 2012-12-02 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with understanding the behavior of metals and alloys when loaded beyond the elastic limit, whether as a result of being shaped or as they are employed for load bearing structures. Basic Engineering Plasticity delivers a comprehensive and accessible introduction to the theories of plasticity. It draws upon numerical techniques and theoretical developments to support detailed examples of the application of plasticity theory. This blend of topics and supporting textbook features ensure that this introduction to the science of plasticity will be valuable for a wide range of mechanical and manufacturing engineering students and professionals. - Brings together the elements of the mechanics of plasticity most pertinent to engineers, at both the micro- and macro-levels - Covers the theory and application of topics such as Limit Analysis, Slip Line Field theory, Crystal Plasticity, Sheet and Bulk Metal Forming, as well as the use of Finite Element Analysis - Clear and well-organized with extensive worked engineering application examples, and end of chapter exercises

Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.

Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.

Download or read book Magnesium written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.

Download or read book Recent Developments and Innovative Applications in Computational Mechanics written by Dana Mueller-Hoeppe and published by Springer Science & Business Media. This book was released on 2011-01-11 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift is dedicated to Professor Dr.-Ing. habil. Peter Wriggers on the occasion of his 60th birthday. It contains contributions from friends and collaborators as well as current and former PhD students from almost all continents. As a very diverse group of people, the authors cover a wide range of topics from fundamental research to industrial applications: contact mechanics, finite element technology, micromechanics, multiscale approaches, particle methods, isogeometric analysis, stochastic methods and further research interests. In summary, the volume presents an overview of the international state of the art in computational mechanics, both in academia and industry.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Download or read book Contemporary Developments in Chemistry written by Columbia University and published by . This book was released on 1927 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.

Download or read book Advances and Trends in Engineering Sciences and Technologies III written by Mohamad Al Ali and published by CRC Press. This book was released on 2019-03-25 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the 3rd International Conference on Engineering Sciences and Technologies (ESaT 2018), held from 12th - 14th September 2018 in the High Tatras Mountains, Tatranské Matliare, Slovak Republic. ESaT 2018 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice - Slovak Republic in collaboration with Peter the Great St. Petersburg Polytechnic University - Russia after the successful organization with excellent feedback of the previous international conferences ESaT 2015 and ESaT 2016. The proceedings is covering various topics and disciplines in civil engineering sciences, such as Buildings and Architectural Engineering, Bearing Structures, Material and Environmental Engineering, Construction Technology and Management, Building Physics and Facilities, Geodesy, Surveying and Mapping, Geotechnics and Traffic Engineering. The proceedings report on new and original progress and trends in various fields of engineering sciences that will be of interest to a wide range of academics and professionals from university and industry. 116 papers originating from more than 10 countries have been accepted for publication in the conference proceedings. Each accepted paper was reviewed by two reviewers, selected according to the scientific area and orientation of the paper, which guarantees topicality, quality and an advanced level of the presented results.

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Mechanical Properties of Metals written by C. W. Lung and published by World Scientific. This book was released on 1999 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended to describe the basic and newly developed elements of the physics of solids and materials science on mechanical properties of metals with as much continuity as is possible. Particular emphasis has been placed in atomistic and fractal approaches and continuum theory of dislocations is also introduced. Since the book is meant for the two main topics of progress in recent years, some interesting and important topics which have not been discussed or introduced are given in detail.For a long time, pair potentials were used very expensively in simulation studies. They can reproduce usefully total energies for many systems. But when one turns to elastic properties, fracture of surfaces, and the vacancy formation energy, deficiencies and limitations begin to emerge. These limitations of the simple pair potential approximation have been addressed by the development of empirical many-body potentials which is the major theme of our book.Over a decade or more, diverse scientists have recognized that many of the structures common in their experiments have a special kind of geometrical complexity. The key to this progress is the recognition that many random structures obey a symmetry that objects look the same on many different scales of observation. The concept of fractals was introduced by Mandelbrot and applied to fractures by himself and collaborators. Their work pointed to a correlation between toughness and the fractal dimension. Our interest is the fractal aspects of fractured surfaces. We will discuss more in our book.The strain field of a dislocation has a long range part and this part can be discussed rigorously from elasticity theory. Recent progress in elastic strain fields and dislocation mobility were made by Indenbom and Lothe. The elementary essentials will be introduced in our book.

Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A materials engineering monograph in the Cambridge Solid State Science Series, first published in 1997.

Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. - Overviews all aspects of magnesium alloy metallurgy - Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys - Reviews the formation, corrosion and surface finishing of magnesium and its alloys

Download or read book Handbook of Mechanical Nanostructuring 2 Volume Set written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.

Download or read book Cyclic Plasticity of Engineering Materials written by Guozheng Kang and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.