Download or read book ITS Sensors and Architectures for Traffic Management and Connected Vehicles written by Lawrence A. Klein and published by CRC Press. This book was released on 2017-08-07 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An intelligent transportation system (ITS) offers considerable opportunities for increasing the safety, efficiency, and predictability of traffic flow and reducing vehicle emissions. Sensors (or detectors) enable the effective gathering of arterial and controlled-access highway information in support of automatic incident detection, active transportation and demand management, traffic-adaptive signal control, and ramp and freeway metering and dispatching of emergency response providers. As traffic flow sensors are integrated with big data sources such as connected and cooperative vehicles, and cell phones and other Bluetooth-enabled devices, more accurate and timely traffic flow information can be obtained. The book examines the roles of traffic management centers that serve cities, counties, and other regions, and the collocation issues that ensue when multiple agencies share the same space. It describes sensor applications and data requirements for several ITS strategies; sensor technologies; sensor installation, initialization, and field-testing procedures; and alternate sources of traffic flow data. The book addresses concerns related to the introduction of automated and connected vehicles, and the benefits that systems engineering and national ITS architectures in the US, Europe, Japan, and elsewhere bring to ITS. Sensor and data fusion benefits to traffic management are described, while the Bayesian and Dempster–Shafer approaches to data fusion are discussed in more detail. ITS Sensors and Architectures for Traffic Management and Connected Vehicles suits the needs of personnel in transportation institutes and highway agencies, and students in undergraduate or graduate transportation engineering courses.
Download or read book Intelligent Transportation Related Complex Systems and Sensors written by Kyandoghere Kyamakya and published by MDPI. This book was released on 2021-09-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building around innovative services related to different modes of transport and traffic management, intelligent transport systems (ITS) are being widely adopted worldwide to improve the efficiency and safety of the transportation system. They enable users to be better informed and make safer, more coordinated, and smarter decisions on the use of transport networks. Current ITSs are complex systems, made up of several components/sub-systems characterized by time-dependent interactions among themselves. Some examples of these transportation-related complex systems include: road traffic sensors, autonomous/automated cars, smart cities, smart sensors, virtual sensors, traffic control systems, smart roads, logistics systems, smart mobility systems, and many others that are emerging from niche areas. The efficient operation of these complex systems requires: i) efficient solutions to the issues of sensors/actuators used to capture and control the physical parameters of these systems, as well as the quality of data collected from these systems; ii) tackling complexities using simulations and analytical modelling techniques; and iii) applying optimization techniques to improve the performance of these systems.
Download or read book Transportation Sensors and Controls written by Society of Photo-optical Instrumentation Engineers and published by SPIE-International Society for Optical Engineering. This book was released on 1997 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensor and Data Fusion for Intelligent Transportation Systems written by Lawrence A. Klein and published by SPIE-International Society for Optical Engineering. This book was released on 2019 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sensor and Data Fusion for Intelligent Transportation Systems introduces readers to the roles of the data fusion processes defined by the Joint Directors of Laboratories (JDL) data fusion model, data fusion algorithms, and noteworthy applications of data fusion to ITS. Additionally, the monograph offers detailed descriptions of three of the widely applied data fusion techniques and their relevance to ITS (namely, Bayesian inference, Dempster-Shafer evidential reasoning, and Kalman filtering), and indicates directions for future research in the area of data fusion. The focus is on data fusion algorithms rather than on sensor and data fusion architectures, although the book does summarize factors that influence the selection of a fusion architecture and several architecture frameworks"--
Download or read book Data Analytics for Intelligent Transportation Systems written by Mashrur Chowdhury and published by Elsevier. This book was released on 2017-04-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Analytics for Intelligent Transportation Systems provides in-depth coverage of data-enabled methods for analyzing intelligent transportation systems that includes detailed coverage of the tools needed to implement these methods using big data analytics and other computing techniques. The book examines the major characteristics of connected transportation systems, along with the fundamental concepts of how to analyze the data they produce. It explores collecting, archiving, processing, and distributing the data, designing data infrastructures, data management and delivery systems, and the required hardware and software technologies. Users will learn how to design effective data visualizations, tactics on the planning process, and how to evaluate alternative data analytics for different connected transportation applications, along with key safety and environmental applications for both commercial and passenger vehicles, data privacy and security issues, and the role of social media data in traffic planning. - Includes case studies in each chapter that illustrate the application of concepts covered - Presents extensive coverage of existing and forthcoming intelligent transportation systems and data analytics technologies - Contains contributors from both leading academic and commercial researchers - Explains how to design effective data visualizations, tactics on the planning process, and how to evaluate alternative data analytics for different connected transportation applications
Download or read book Sensor and Data Fusion written by Lawrence A. Klein and published by SPIE Press. This book was released on 2004 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the benefits of sensor fusion by considering the characteristics of infrared, microwave, and millimeter-wave sensors, including the influence of the atmosphere on their performance. Applications that benefit from this technology include: vehicular traffic management, remote sensing, target classification and tracking- weather forecasting- military and homeland defense. Covering data fusion algorithms in detail, Klein includes a summary of the information required to implement each of the algorithms discussed, and outlines system application scenarios that may limit sensor size but that require high resolution data.
Download or read book Sensor Technologies and Data Requirements for ITS written by Lawrence A. Klein and published by CABI. This book was released on 2001 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains: Adobe Acrobat files for Appendices A-L.
Download or read book Intelligent Transport Systems written by Asier Perallos and published by John Wiley & Sons. This book was released on 2015-12-14 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTELLIGENT TRANSPORT SYSTEMS TECHNOLOGIES AND APPLICATIONS This book provides a systematic overview of Intelligent Transportation Systems (ITS), offering an insight into the reference architectures developed within the main research projects. It delves into each of the layers of such architectures, from physical to application layer, describing the technological issues which are being currently faced by some of the most important ITS research groups. The book concludes with some end-user services and applications deployed by industrial partners. The book is a well-balanced combination of academic contributions and industrial applications in the field of Intelligent Transportation Systems. It includes the most representative technologies and research results achieved by some of the most relevant research groups working on ITS, collated to show the chances of generating industrial solutions to be deployed in real transportation environments.
Download or read book Control in Transportation Systems 1986 written by M.M. Etschmaier and published by Elsevier. This book was released on 2014-05-23 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume investigates developments in, and management of, transportation systems, future trends and what effects these will have on society. The book studies transportation systems planning; traffic problems and the issue of conservation; the use of logistics, and the role of computers and robotics in traffic control.
Download or read book Control in Transportation Systems written by D. Klamt and published by Elsevier. This book was released on 2014-05-23 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control in Transportation Systems covers the proceedings of the Fourth International Federation of Automatic Control (IFAC)/International Federation for Information Processing (IFIP)/International Federation of Operational Research Societies (IFORS) Conference on Control in Transportation Systems. The book discusses papers that tackle applications, methodologies, and control problems of surface transportation systems. This text covers topics such as operation of ground transportation systems; availability and safety; and the impact of modeling on the operation of transportation systems. This selection also discusses self-tuning control of multilocomotive-powered long freight trains; fuzzy control for automatic train operation system; and energy optimal control in transportation systems. This book will be of great use to engineers especially those who specialize with transport systems.
Download or read book ITS Sensors and Architectures for Traffic Management and Connected Vehicles written by Lawrence A. Klein and published by CRC Press. This book was released on 2017-08-07 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: An intelligent transportation system (ITS) offers considerable opportunities for increasing the safety, efficiency, and predictability of traffic flow and reducing vehicle emissions. Sensors (or detectors) enable the effective gathering of arterial and controlled-access highway information in support of automatic incident detection, active transportation and demand management, traffic-adaptive signal control, and ramp and freeway metering and dispatching of emergency response providers. As traffic flow sensors are integrated with big data sources such as connected and cooperative vehicles, and cell phones and other Bluetooth-enabled devices, more accurate and timely traffic flow information can be obtained. The book examines the roles of traffic management centers that serve cities, counties, and other regions, and the collocation issues that ensue when multiple agencies share the same space. It describes sensor applications and data requirements for several ITS strategies; sensor technologies; sensor installation, initialization, and field-testing procedures; and alternate sources of traffic flow data. The book addresses concerns related to the introduction of automated and connected vehicles, and the benefits that systems engineering and national ITS architectures in the US, Europe, Japan, and elsewhere bring to ITS. Sensor and data fusion benefits to traffic management are described, while the Bayesian and Dempster–Shafer approaches to data fusion are discussed in more detail. ITS Sensors and Architectures for Traffic Management and Connected Vehicles suits the needs of personnel in transportation institutes and highway agencies, and students in undergraduate or graduate transportation engineering courses.
Download or read book Control Computers Communications in Transportation written by J.-P. Perrin and published by Elsevier. This book was released on 2014-06-28 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume investigates developments and future trends in transportation research and what effects they will have on society. The coverage is broad; including road (urban and motorway), rail and air-traffic control. The sections deal with safety aspects, modelling and simulation, the use of sensors and image processing. The final section covers the development and implementation of new route guidance systems. This up-to-date information will be of use to transport engineers, urban planners, operations research and systems scientists.
Download or read book Transportation Cyber Physical Systems written by Lipika Deka and published by Elsevier. This book was released on 2018-07-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation Cyber-Physical Systems provides current and future researchers, developers and practitioners with the latest thinking on the emerging interdisciplinary field of Transportation Cyber Physical Systems (TCPS). The book focuses on enhancing efficiency, reducing environmental stress, and meeting societal demands across the continually growing air, water and land transportation needs of both people and goods. Users will find a valuable resource that helps accelerate the research and development of transportation and mobility CPS-driven innovation for the security, reliability and stability of society at-large. The book integrates ideas from Transport and CPS experts and visionaries, consolidating the latest thinking on the topic. As cars, traffic lights and the built environment are becoming connected and augmented with embedded intelligence, it is important to understand how smart ecosystems that encompass hardware, software, and physical components can help sense the changing state of the real world. - Bridges the gap between the transportation, CPS and civil engineering communities - Includes numerous examples of practical applications that show how diverse technologies and topics are integrated in practice - Examines timely, state-of-the-art topics, such as big data analytics, privacy, cybersecurity and smart cities - Shows how TCPS can be developed and deployed, along with its associated challenges - Includes pedagogical aids, such as Illustrations of application scenarios, architecture details, tables describing available methods and tools, chapter objectives, and a glossary - Contains international contributions from academia, government and industry
Download or read book Automotive Sensors written by John Turner and published by Momentum Press. This book was released on 2009 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will help engineers, technicians, and designers to better understand a wide range of sensors, from those based on piezoelectric phenomena through those for thermal and flow measurement to the directional sensors that can inform the driver of his orientation on the road. Author John Turner, concludes his book with future trends in use of telematic sensing systems for traffic control and traffic automation.
Download or read book Sensors for Safety and Process Control in Hydrogen Technologies written by Thomas Hübert and published by CRC Press. This book was released on 2018-10-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand, Select, and Design Sensors for Hydrogen-Based Applications The use of hydrogen generated from renewable energy sources is expected to become an essential component of a low-carbon, environmentally friendly energy supply, spurring the worldwide development of hydrogen technologies. Sensors for Safety and Process Control in Hydrogen Technologies provides practical, expert-driven information on modern sensors for hydrogen and other gases as well as physical parameters essential for safety and process control in hydrogen technologies. It illustrates how sensing technologies can ensure the safe and efficient implementation of the emerging global hydrogen market. The book explains the various facets of sensor technologies, including practical aspects relevant in hydrogen technologies. It presents a comprehensive and up-to-date account of the theory (physical and chemical principles), design, and implementations of sensors in hydrogen technologies. The authors also offer guidance on the development of new sensors based on the analysis of the capabilities and limitations of existing sensors with respect to current performance requirements. Suitable for both technical and non-technical personnel, the book provides a balance between detailed descriptions and simple explanations. It gives invaluable insight into the role sensors play as key enabling devices for both control and safety in established and emerging hydrogen technologies.
Download or read book Countdown to Kyoto Parts I III written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1998 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation Control and Automation of Water and Wastewater Treatment and Transport Systems written by R. Briggs and published by Elsevier. This book was released on 2013-09-24 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation, Control and Automation of Water and Wastewater Treatment and Transport Systems documents the proceedings of the 5th IAWPRC Workshop held in Yokohama and Kyoto, Japan, 26 July-3 August 1990. The papers presented at this Workshop have emphasized the following aspects: • new sensor technology based on developments in electrochemistry, fiber optics, and electro-optics; • research into materials such as those needed to produce membranes of the required selectivity, for immobilization of reactive species, and for addition of reagents and standards; • the use of inferential measurements coupled with expert system technology; • the ever-increasing power of microprocessors and the continuing reduction in their unit costs; • better communications capability; • improved mathematical modeling; • an increased awareness of the improved management that results from the timely availability of relevant data to the appropriate levels in the management hierarchy. This book, together with the proceedings of previous workshops, provides what is probably the most comprehensive account of the state of the art and recent developments in instrumentation, control, and automation as applied to the water and water-using industries, and as such will be invaluable to the practitioner, the researcher, and the student community.
