Download or read book Training Circular Tc 3 22 50 Heavy Machine Gun M2 written by United States Government Us Army and published by Createspace Independent Publishing Platform. This book was released on 2017-06-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.50 Heavy Machine Gun M2 Series May 2017 TC 3-22.50 covers the M2 and M2A1 heavy barrel caliber .50 machine guns in the ground-mount role. The same principles and techniques apply to mounted weapons as well. The head space and timing are fixed on the M2A1 and it has a different barrel assembly and a few other subtle differences. Most of the book assumes use of the M2A1 with the M205 lightweight tripod. Soldiers using the M2 or the M3 tripod should read their respective technical manuals. TC 3-22.50 has nine chapters and six appendices. Each chapter and appendix builds on the one before. TC 3-22.50 supports (but does not cover) the Army's training strategy for the weapon at the individual level. TC 3-22.50 describes the aiming devices for the M2/M2A1 that enhance the Soldier's target detection and acquisition skills. TC 3-22.50 provides key recognition information to build the Soldier's skills in correctly identifying potential targets as friend, foe, or noncombatant (neutral) once detected. Chapters 1 through 4 provides an overview of the weapon (chapter 1) and discusses principles of operation (chapter 2), aiming devices (chapter 3), and mountable and mounting equipment (chapter 4). Chapters 5 through 9 explain employment, stability, aiming, control, and movement, while focusing on the Soldier skills needed to produce well-aimed shots. Appendixes A and B provide detailed information about ammunition and ballistics. Appendix C discusses advanced engagement concepts. Appendix D provides common tactical drills used in training and combat that directly support tactical engagements. Appendix E describes zeroing procedures. Appendix F provides qualification.

Download or read book Training Circular Tc 3 22 240 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-05-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.240 (FM 3-22.68) Medium Machine Gun April 2017 Training Circular (TC) 3-22.240 is comprised of nine chapters and six appendices, and is specifically tailored to the individual Soldier's use of the M240-series medium machine gun (MMG). It provides specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. TC 3-22.240 is organized in a progressive manner, each chapter or appendix builds on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 describe the weapon, aiming devices, mountable equipment, and accessories associated with the weapon. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Soldier skills needed to produce well-aimed bursts. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Finally, appendix E of this publication provides a common location for reference in this and future weapons publications. TC 2-22.240 does not cover the specific machine gun strategy, ammunition requirements for the training strategy, or range operations. Separate training circulars cover those areas. TC 3-22.240 applies to all Soldiers, regardless of experience or position. TC 3-22.240 is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book Training Circular Tc 3 22 249 Fm 3 22 68 Light Machine Gun M249 Series May 2017 written by United States Government Us Army and published by Createspace Independent Publishing Platform. This book was released on 2017-05-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.249 (FM 3-22.68) Light Machine Gun M249 Series May 2017 TC 3-22.249 is comprised of nine chapters and six appendices and is specifically tailored to the individual Soldier's use of the M249 light machine gun. TC 3-22.249 provides specific information about the weapon, aiming devices, and attachments, followed by sequential chapters on the tactical employment of the weapon system. This TC is organized in a progressive manner; each chapter or appendix builds upon the information from the previous section. The organization of this training circular provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 describe the weapon, aiming devices, mountable equipment, and accessories associated with the machine gun. General information is provided in the chapters of the manual with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics. Chapters 5 through 9 provide employment, stability, aiming, control, and movement information. This portion focuses on the Soldier skills needed to produce well-aimed bursts. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills used in training and combat to directly support tactical engagements. Finally, appendix E of this publication provides a common location for reference in this and future weapons publications. TC 3-22.249 does not cover the specific automatic rifle and light machine gun training strategy, ammunition requirements for the training strategy. Separate training circulars cover those areas. TC 3-22.249 applies to all Soldiers regardless of experience or position. TC 3-22.249 is designed specifically for the Soldier's use on the range during training and as a reference while deployed.

Download or read book Training Circular Tc 3 22 19 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-05-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.19 (FM 3-22.27) Grenade Machine Gun MK 19 MOD 3 May 2017 TC 3-22.19 is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the MK 19 grenade machine gun. This TC is divided into two major parts to provide specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. TC 3-22.19 is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 of this TC describe the weapon, aiming devices, weapon mounts, and accessories associated with the weapon. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Machine Gun Theory. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce a well-aimed burst. Appendix C of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Appendix D provides zeroing information on this weapon. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference for qualification. TC 3-22.19 does not cover the specific machine gun strategy, ammunition requirements for the training strategy, or range operations. These areas will be covered in separate training circulars. TC 3-22.19 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book Training Circular TC 3 22 9 Rifle and Carbine Change 3 November 2019 written by United States Government Us Army and published by . This book was released on 2019-12-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-22.9 Rifle and Carbine Change 3 November 2019, provides Soldiers with the critical information for their rifle or carbine and how it functions, its capabilities, the capabilities of the optics and ammunition, and the application of the functional elements of the shot process.The principal audience for TC 3-22.9 is all members of the profession of arms. Trainers and educators throughout the Army will use this publication.This manual is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the M4- or M16-series weapon. This TC provides specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. The training circular itself is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level.Chapters 1 through 4 describe the weapon, aiming devices, mountable weapons, and accessories associated with the rifle and carbine. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics.Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce well aimed shots. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference.TC 3-22.9 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book Training Circular TC 3 22 19 Grenade Machine Gun MK 19 MOD 3 Change 1 January 2020 written by United States Government Us Army and published by . This book was released on 2020-01-21 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This U.S. Army manual, Training Circular TC 3-22.19 Grenade Machine Gun MK 19 MOD 3 Change 1 January 2020, is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the MK 19 grenade machine gun. This TC is divided into two major parts to provide specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. TC 3-22.19 is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 of this TC describe the weapon, aiming devices, weapon mounts, and accessories associated with the weapon. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Machine Gun Theory. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solder skills needed to produce a well-aimed burst. Appendix C of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Appendix D provides zeroing information on this weapon. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference for qualification. TC 3-22.19 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed. This publication applies to the active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR).

Download or read book Training Circular Tc 3 22 9 Rifle and Carbine May 2016 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-01-24 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.9 Rifle and Carbine May 2016 This manual is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the M4- or M16-series weapon. This TC provides specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. The training circular itself is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 describe the weapon, aiming devices, mountable weapons, and accessories associated with the rifle and carbine. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce well aimed shots. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference. This manual does not cover the specific rifle or carbine training strategy, ammunition requirements for the training strategy, or range operations. These areas will be covered in separate training circulars. Conclusion TC 3-22.9 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book Training Circular TC 3 20 40 Training and Qualification Individual Weapons July 2019 written by United States Government Us Army and published by . This book was released on 2019-08-13 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-20.40 Training and Qualification - Individual Weapons July 2019, describes how a unit builds their unit training plan (UTP) for individual weapons. It provides all the information needed to plan, prepare, execute, and assess individual weapons training strategies and certifications. The training strategies described follow the progressive and gated structure of the integrated weapons training strategy. This manual defines the Army-standard requirements for individual weapons qualification and establishes those qualifications as prerequisites for continued training for either specific capability certification or collective live-fire training.TC 3-20.40 composed of four chapters and nine appendixes, and is specifically tailored to the training strategy, qualification standards, and various weapons certifications of current individually assigned weapons in the Army's inventory. TC 3-20.40 is organized in a progressive manner so that each chapter provides the information a unit requires to plan and prepare for weapons training. The appendixes include the "how to" execute the training event according to each weapons training strategy or certification. The appendixes also include essential information concerning ammunition, forms, and weapons safety.TC 3-20.40 applies to all Soldiers, regardless of experience or position, who are assigned an individual weapon. This publication is designed specifically for unit commanders, training managers, and staff to tailor small arms training to achieve the appropriate level of lethality and proficiency.

Download or read book TC 3 22 9 Rifle and Carbine written by Headquarters Department of the Army and published by Lulu.com. This book was released on 2017-09-23 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: TC 3-22.9 Rifle and Carbine is the May 2016 revision of FM 3-22.9 Rifle Marksmanship. This revision brings TC 3-22.9 in line with Doctrine 2015. This is the definitive basic and advanced rifle marksmanship manual utilized by the United States Army. A must have for all Soldiers.

Download or read book Rifle and Carbine written by Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2017-09-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-22.9 / FM 3-22.9 "Rifle and Carbine," provides Soldiers with the critical information for their rifle or carbine and how it functions, its capabilities, the capabilities of the optics and ammunition, and the application of the functional elements of the shot process.

Download or read book Training Circular TC 3 20 40 Training and Qualification Individual Weapons Change 1 November 2019 written by United States Government Us Army and published by . This book was released on 2019-12-25 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-20.40 Training and Qualification - Individual Weapons Change 1 November 2019, provides the outline for all individual weapon's training strategies, resources, prerequisites, and requirements for planning and executing training. It provides a single reference for commanders, staff, planners, and trainers. The principal audience for TC 3-20.40 is all members of the profession of arms. Trainers and educators throughout the Army will also use this publication. TC 3-20.40 applies to the Active Army, the Army National Guard, the Army Civilian Corps, and the United States Army Reserve unless otherwise stated.TC 3-20.40 describes how a unit builds their unit training plan (UTP) for individual weapons. It provides all the information needed to plan, prepare, execute, and assess individual weapons training strategies and certifications. The training strategies described follow the progressive and gated structure of the integrated weapons training strategy. This manual defines the Army-standard requirements for individual weapons qualification and establishes those qualifications as prerequisites for continued training for either specific capability certification or collective live-fire training.TC 3-20.40 composed of four chapters and nine appendixes, and is specifically tailored to the training strategy, qualification standards, and various weapons certifications of current individually assigned weapons in the Army's inventory. TC 3-20.40 is organized in a progressive manner so that each chapter provides the information a unit requires to plan and prepare for weapons training. The appendixes include the "how to" execute the training event according to each weapons training strategy or certification. The appendixes also include essential information concerning ammunition, forms, and weapons safety.TC 3-20.40 applies to all Soldiers, regardless of experience or position, who are assigned an individual weapon. This publication is designed specifically for unit commanders, training managers, and staff to tailor small arms training to achieve the appropriate level of lethality and proficiency.

Download or read book Machine Gun Training 303 and 22 Cartridges written by E. John Solano and published by . This book was released on 1916 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Training Circular 3 22 9 Rifle and Carbine written by Headquarters Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2016-08-10 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete carbine class in a book! A must-have item for the range bag of any AR-15 series owner, TC 3-22.9 contains the very latest military tactics, techniques and procedures for the use of the M4 series 5.56mm NATO carbine and the M16 series 5.56mm NATO rifle. In a stunning departure from previous US Army weapon training programs, the TTPs detailed in TC 3-22.9 are designed to teach the shooter how to operate his or her weapon and engage an enemy in a practical, safe and above all, highly effective manner. Thrashed out over ten months spent trialing the TTPs with various line and SOF units under training, field and operational conditions, this is the best Army weapons training program ever fielded. Completely up to date and highly effective. The manual goes through Safe Weapons Handling, Rifle and Carbine Principles of Operation, Rifle Combat Optics plus all sorts of Mountable Equipment. It also covers the shooting process, firing positions, moving targets, wind, onto clearing malfunctions and shooting on the move. Ammunition, Ballistics, Zeroing the rifle and different drills. Read it and you will become a better thinker and shooter! Also check out the "Rifle Gold Book," released by the Army marksmanship Unit as a full-color supplement to TC 3-22.9.

Download or read book Operator s Manual written by and published by . This book was released on 1982 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical manual 9 1005 213 10 written by United States. Headquarters, Department of the army and published by . This book was released on 1968 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Infantry Weapons Company written by Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2017-08-10 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual, "The Infantry Weapons Company," (FM 3-21.12) provides a doctrinal framework for the Infantry weapons company assigned to Infantry battalions in an Infantry brigade combat team (IBCT). It is a companion to FM 3-21.10, The Infantry Rifle Company, much of which applies to the Infantry weapons company and as such will not be repeated herein. This manual will discuss on the unique characteristics of the Infantry weapons company, including principles, tactics, techniques, procedures, and terms and symbols. It will also cover what the Infantry weapons company brings to the Infantry battalion and the battlefield. Among topics covered in FM 3-21.10 but omitted here are the characteristics and fundamentals of urban operations, risk management and fratricide avoidance, heavy and Stryker unit employment, sniper employment, improvised explosive devices, operations in a chemical, biological, radiological, and nuclear (CBRN) environment, media considerations, pattern analysis, and situational understanding. It focuses on the employment of the Infantry weapons company while fighting as a pure company or combined arms team under the command of an Infantry weapons company commander. This framework will help Infantry weapons company leaders effectively--Exploit weapons company-unique capabilities; Employ the company using unit weapon fundamentals; Reduce the vulnerability of the unit; Plan and conduct full-spectrum operations; Accomplish missions in various tactical situations, from stability and civil support to high-intensity combat; Win on the battlefield.

Download or read book Training Circular TC 3 23 35 Pistol Including Change 2 January 2020 written by United States Government Us Army and published by . This book was released on 2020-05 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army manual publication, Training Circular TC 3-23.35 Pistol Including Change 2 January 2020, provides the framework and techniques for conducting pistol training; the components and cycle of function for the M9 service pistol; its characteristics, equipment, and ammunition; and covers the functional elements of the shot process that are essential to build Soldier proficiency with their service pistol. It serves as an authoritative reference for personnel developing institutional, installation, and standard operating procedures (SOPs) for pistol training and qualification. The principal audience for Training Circular (TC) 3-23.35 includes commanders, staff, leaders, Soldiers, trainers, and instructors who are responsible for planning, preparing, executing, and assessing pistol training and employment. This manual is comprised of nine chapters and four appendices, and is specifically tailored to the individual Soldier's use of the M9 service pistol. This training circular provides specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. The training circular itself is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 describe safety, operation, types of sights, and accessories associated with the M9 service pistol. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce well-aimed shots. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. This manual does not cover the specific M9 service pistol training strategy, ammunition requirements for the training strategy, qualification, or range operations. These areas will be covered in separate training circulars. The training strategy through qualification can be found in TC 3-20.40, Training and Qualification - Individual Weapons. TC 3-23.35 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training and as a reference while deployed.