Download or read book Training Circular Tc 3 22 19 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-05-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-22.19 (FM 3-22.27) Grenade Machine Gun MK 19 MOD 3 May 2017 TC 3-22.19 is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the MK 19 grenade machine gun. This TC is divided into two major parts to provide specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. TC 3-22.19 is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level. Chapters 1 through 4 of this TC describe the weapon, aiming devices, weapon mounts, and accessories associated with the weapon. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Machine Gun Theory. Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce a well-aimed burst. Appendix C of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Appendix D provides zeroing information on this weapon. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference for qualification. TC 3-22.19 does not cover the specific machine gun strategy, ammunition requirements for the training strategy, or range operations. These areas will be covered in separate training circulars. TC 3-22.19 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book Rifle and Carbine written by Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2017-09-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-22.9 / FM 3-22.9 "Rifle and Carbine," provides Soldiers with the critical information for their rifle or carbine and how it functions, its capabilities, the capabilities of the optics and ammunition, and the application of the functional elements of the shot process.

Download or read book Training Circular TC 3 20 40 Training and Qualification Individual Weapons July 2019 written by United States Government Us Army and published by . This book was released on 2019-08-13 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-20.40 Training and Qualification - Individual Weapons July 2019, describes how a unit builds their unit training plan (UTP) for individual weapons. It provides all the information needed to plan, prepare, execute, and assess individual weapons training strategies and certifications. The training strategies described follow the progressive and gated structure of the integrated weapons training strategy. This manual defines the Army-standard requirements for individual weapons qualification and establishes those qualifications as prerequisites for continued training for either specific capability certification or collective live-fire training.TC 3-20.40 composed of four chapters and nine appendixes, and is specifically tailored to the training strategy, qualification standards, and various weapons certifications of current individually assigned weapons in the Army's inventory. TC 3-20.40 is organized in a progressive manner so that each chapter provides the information a unit requires to plan and prepare for weapons training. The appendixes include the "how to" execute the training event according to each weapons training strategy or certification. The appendixes also include essential information concerning ammunition, forms, and weapons safety.TC 3-20.40 applies to all Soldiers, regardless of experience or position, who are assigned an individual weapon. This publication is designed specifically for unit commanders, training managers, and staff to tailor small arms training to achieve the appropriate level of lethality and proficiency.

Download or read book Training Circular TC 3 20 11 Training to Proficiency Maneuver Company and Troop April 2021 written by United States Government Us Army and published by . This book was released on 2021-04-30 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army manual, Training Circular TC 3-20.11 Training to Proficiency Maneuver Company and Troop April 2021, provides a detailed description of the maneuver force's training strategy for all company and troop-size formations to achieve fire and maneuver proficiency at home station. TC 3-20.11 includes the purpose of the integrated weapons training strategy, its standard structure, training requirements, the integration of combined arms assets, and resource requirements for the Armored, Infantry, and Stryker brigade combat teams' maneuver elements. This publication provides training principles and techniques for use by units to gain proficiency in engaging and destroying threats efficiently in any operational environment. This publication includes all the required planning and preparation for a successful unit weapons training program. Where vehicle- or weapon-specific techniques in this training circular conflict with technical manuals (TMs), the readers should follow the procedures in the TM. The principal audience for TC 3-20.11 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication.

Download or read book Training Circular TC 3 20 40 Training and Qualification Individual Weapons Change 1 November 2019 written by United States Government Us Army and published by . This book was released on 2019-12-25 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-20.40 Training and Qualification - Individual Weapons Change 1 November 2019, provides the outline for all individual weapon's training strategies, resources, prerequisites, and requirements for planning and executing training. It provides a single reference for commanders, staff, planners, and trainers. The principal audience for TC 3-20.40 is all members of the profession of arms. Trainers and educators throughout the Army will also use this publication. TC 3-20.40 applies to the Active Army, the Army National Guard, the Army Civilian Corps, and the United States Army Reserve unless otherwise stated.TC 3-20.40 describes how a unit builds their unit training plan (UTP) for individual weapons. It provides all the information needed to plan, prepare, execute, and assess individual weapons training strategies and certifications. The training strategies described follow the progressive and gated structure of the integrated weapons training strategy. This manual defines the Army-standard requirements for individual weapons qualification and establishes those qualifications as prerequisites for continued training for either specific capability certification or collective live-fire training.TC 3-20.40 composed of four chapters and nine appendixes, and is specifically tailored to the training strategy, qualification standards, and various weapons certifications of current individually assigned weapons in the Army's inventory. TC 3-20.40 is organized in a progressive manner so that each chapter provides the information a unit requires to plan and prepare for weapons training. The appendixes include the "how to" execute the training event according to each weapons training strategy or certification. The appendixes also include essential information concerning ammunition, forms, and weapons safety.TC 3-20.40 applies to all Soldiers, regardless of experience or position, who are assigned an individual weapon. This publication is designed specifically for unit commanders, training managers, and staff to tailor small arms training to achieve the appropriate level of lethality and proficiency.

Download or read book Training Circular TC 3 22 9 Rifle and Carbine Change 3 November 2019 written by United States Government Us Army and published by . This book was released on 2019-12-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-22.9 Rifle and Carbine Change 3 November 2019, provides Soldiers with the critical information for their rifle or carbine and how it functions, its capabilities, the capabilities of the optics and ammunition, and the application of the functional elements of the shot process.The principal audience for TC 3-22.9 is all members of the profession of arms. Trainers and educators throughout the Army will use this publication.This manual is comprised of nine chapters and five appendices, and is specifically tailored to the individual Soldier's use of the M4- or M16-series weapon. This TC provides specific information about the weapon, aiming devices, attachments, followed by sequential chapters on the tactical employment of the weapon system. The training circular itself is purposely organized in a progressive manner, each chapter or appendix building on the information from the previous section. This organization provides a logical sequence of information which directly supports the Army's training strategy for the weapon at the individual level.Chapters 1 through 4 describe the weapon, aiming devices, mountable weapons, and accessories associated with the rifle and carbine. General information is provided in the chapters of the manual, with more advanced information placed in appendix A, Ammunition, and appendix B, Ballistics.Chapters 5 through 9 provide the employment, stability, aiming, control and movement information. This portion focuses on the Solider skills needed to produce well aimed shots. Advanced engagement concepts are provided in appendix C of this publication. Appendix D of this publication provides common tactical drills that are used in training and combat that directly support tactical engagements. Finally, appendix E of this publication, is provided at a common location in this and future weapons publications to provide a common location for reference.TC 3-22.9 applies to all Soldiers, regardless of experience or position. This publication is designed specifically for the Soldier's use on the range during training, and as a reference while deployed.

Download or read book MK 19 40 Mm Grenade Machine Gun MOD 3 FM 3 22 27 written by Department Army and published by CreateSpace. This book was released on 2012-10-15 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual discusses how to train the unit to use the MK 19, 40-mm grenade machine gun, model (MOD) 3, referred to in this manual as the MK 19. This manual highlights mechanical training, weapon capabilities, and gunnery principles, methods, techniques, and standards that apply to the MOD 3. It also includes preliminary gunnery, a gunnery skills test, gunnery tables, and qualification tables. If this information conflicts with an applicable technical manual (TM), revised TM, or TM update, the crew will follow the guidance in the most recently published document. The primary audiences for this manual are soldiers, trainers, and staff officers. Units can modify the gunnery program to meet local training restraints. Although the gunnery tables are intended for use with live fire, trainers can use the tactical engagement simulator system (TESS), a video disc trainer (VDT), a multipurpose arcade combat simulator (MACS), or other training device, except on qualification tables. In all cases, units must evaluate their training to ensure that it follows the building-block principle and adheres to sound training policy. Only a crew that is trained and does well in preliminary gunnery exercises is likely to do well in live-fire exercises (LFX) and in combat situations. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.

Download or read book U S Army Board Study Guide written by and published by . This book was released on 2006-06 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Training Circular Tc 3 22 37 Fm 3 22 37 written by United States Government Army and published by CreateSpace. This book was released on 2013-08-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides technical information, training techniques, and guidance on the current Javelin weapon system and Block 1 improvements. The intended users include unit leaders, trainers, and designated gunners. The users will find this information invaluable in their efforts to successfully integrate this weapon system into their combat operations. This publication applies to the Active Army, the Army National Guard (ARNG)/National Guard of the United States (ARNGUS), and the US Army Reserve (USAR). Terms that have joint or Army definitions are identified in both the Glossary and the text. Terms, for which TC 3-22.37 is the proponent FM, are indicated with an asterisk in the Glossary. Uniforms depicted in this manual were drawn without camouflage for clarity of the illustration. Unless this publication states otherwise, masculine nouns and pronouns refer to both men and women. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC).

Download or read book Tc 3 19 5 Nonlethal Weapons Training written by Headquarters Department of the Army and published by Createspace Independent Publishing Platform. This book was released on 2017-09-08 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Training Circular (TC) serves as a training support package for nonlethal training. The TC provides guidance for leaders conducting nonlethal weapons (NLW) training. It focuses on effective use of NLW and capabilities. This TC applies to the Active Army, the Army National Guard (ARNG)/National Guard of the United States (ARNGUS), and the United States Army Reserves (USAR) unless otherwise stated. TC 3-19.5 is organized into the following eleven chapters and five appendices that provide nonlethal weapons training strategies and training support materials: Chapter 1, Introduction, explains the purpose and scope of the TC and describes the Army's nonlethal capability requirements. Chapter 2, Conduct of Training, provides the training strategy for nonlethal weapons training. Chapter 3, Employ 12 Gauge Point and Area Target Munitions, describes the characteristic, employment techniques, and training for the 12 gauge nonlethal rounds. Chapter 4, Employ 40 Millimeter Nonlethal Munitions, describes the characteristic, employment techniques, and training for the 40mm nonlethal munitions. Chapter 5, Employ Nonlethal Grenades, describes the specifications, safety features, and employment considerations for nonlethal hand thrown grenades. Chapter 6, Employ Modular Crowd Control Munition, explains how to train Soldiers to emplace, aim, and arm the M5 Modular Crowd Control Munition. Chapter 7, Employ 66 Millimeter Nonlethal Grenades, describes the loading, unloading, and launching procedures for 66mm nonlethal grenades. Chapter 8, Employ Individual Riot Control Agent Disperser, provides employment procedures for the M39 individual riot control agent disperser and describes physical and psychological effects of riot control agents. Chapter 9, Employ Electro-Muscular Disruption Device, explains the function, characteristics, and employment of the X26E TASER(R). Chapter 10, Employ Vehicle Barriers and Arresting Devices, describes training and employment of portable nonlethal vehicle barriers, arresting devices, spike systems, and caltrops. Chapter 11, Employ Communication Devices, explains the techniques for operating handheld language translators and voice amplifier. Appendix A, Nonlethal Capabilities Set, list the components currently available in the nonlethal capabilities set. Appendix B, Nonlethal Munitions Practical Exercise, contains instructor guidance and firing commands for conducting a practical exercise on 12 gauge and 40mm nonlethal munitions. Appendix C, M5 MCCM Practical Exercise, provides instructor guidance and firing commands for conducting a practical exercise on the M5 Modular Crowd Control Munition.

Download or read book Field Manual FM 3 22 27 FM 23 27 MK 19 40 Mm Grenade Machine Gun Mod 3 November 2003 written by United States Government US Army and published by CreateSpace. This book was released on 2012-07-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual discusses how to train the unit to use the MK 19, 40-mm grenade machine gun, model (MOD) 3, referred to in this manual as the MK 19. This manual highlights mechanical training, weapon capabilities, and gunnery principles, methods, techniques, and standards that apply to the MOD 3. It also includes preliminary gunnery, a gunnery skills test, gunnery tables, and qualification tables. If this information conflicts with an applicable technical manual (TM), revised TM, or TM update, the crew will follow the guidance in the most recently published document. The primary audiences for this manual are soldiers, trainers, and staff officers. Units can modify the gunnery program to meet local training restraints. Although the gunnery tables are intended for use with live fire, trainers can use the tactical engagement simulator system (TESS), a video disc trainer (VDT), a multipurpose arcade combat simulator (MACS), or other training device, except on qualification tables. In all cases, units must evaluate their training to ensure that it follows the building-block principle and adheres to sound training policy. Only a crew that is trained and does well in preliminary gunnery exercises is likely to do well in live-fire exercises (LFX) and in combat situations.

Download or read book Training Circular TC 3 20 0 Integrated Weapons Training Strategy IWTS June 2019 written by United States Government Us Army and published by Independently Published. This book was released on 2019-06-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual, Training Circular TC 3-20.0 Integrated Weapons Training Strategy (IWTS) June 2019, provides a detailed description of the maneuver force's overarching training strategy for all individual and crew-served weapons, through maneuver battalion at home station to achieve fire and maneuver proficiency. It includes the purpose of the IWTS, its standard structure, training requirements, the integration of combined arms assets, and resource requirements for the Armored, Infantry, and Stryker brigade combat teams' maneuver elements. It provides training principles and techniques for use by units to gain proficiency in engaging and destroying threats ethically, effectively, and efficiently in any operational environment.This publication includes all the planning and preparation required for a successful unit weapons training program. Where vehicle- or weapon-specific techniques in this TC conflict with technical manuals, the readers should follow the procedures in the technical manual.This publication applies to the Active Army, the Army National Guard, the Army Civilian Corps, and the United States Army Reserve unless otherwise stated. Users and readers of this publication are invited to submit recommendations that will improve its effectiveness.The principal audience for TC 3-20.0 is commanders, planners, trainers, and master gunners of maneuver units. It provides the details of the Integrated Weapons Training Strategy, known as IWTS, and structure for the maneuver brigade combat teams (BCTs) of the United States Army. The IWTS is an overarching, integrated, and standardized training strategy for the maneuver commander to train, evaluate and assess their unit's overall proficiency at home station. The IWTS incorporates the training models for all individual, crew-served, and weapon platforms, Infantry squads, scouts, engineer squads, as well as maneuver sections, platoons, companies, and battalions, within the maneuver BCT. The IWTS provides the critical training path at home station to weapon, system, and unit proficiency. This includes the collective live- fire training requirements for dismounted squad through battalion live-fire events at home station. This standardized strategy is designed to synchronize with the Army's force generation model (sustainable readiness model), and provide detailed training requirements to maneuver units.The IWTS maximizes the use of training aids, devices, simulators, and simulations (known as TADSS) within all force-on-force and live-fire events in a systematic manner to increase and sustain Soldier and unit proficiency, effectiveness, and lethality. The training strategy is capability-based (weapon/system, ammunition, optics, Soldier) and maximizes the training resources available across the force. This strategy is directly synchronized with echelon-based proficiency gates established within the sustainable readiness model and meets the established training proficiency aim points and standards for a ready and capable force.The IWTS encompasses all critical training that builds a unit's ability to shoot, move, and communicate effectively and efficiently (termed the "critical training path"). Although the unit conducts other training as part of its training plan, the critical training path includes only those events that, at a minimum, should be conducted to ensure the maximum experience is achieved or gained by the trained Soldier or unit.

Download or read book Field Artillery Manual Cannon Gunnery written by Department of the Army and published by . This book was released on 2017-08-19 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-09.81, "Field Artillery Manual Cannon Gunnery," sets forth the doctrine pertaining to the employment of artillery fires. It explains all aspects of the manual cannon gunnery problem and presents a practical application of the science of ballistics. It includes step-by-step instructions for manually solving the gunnery problem which can be applied within the framework of decisive action or unified land operations. It is applicable to any Army personnel at the battalion or battery responsible to delivered field artillery fires. The principal audience for ATP 3-09.42 is all members of the Profession of Arms. This includes field artillery Soldiers and combined arms chain of command field and company grade officers, middle-grade and senior noncommissioned officers (NCO), and battalion and squadron command groups and staffs. This manual also provides guidance for division and corps leaders and staffs in training for and employment of the BCT in decisive action. This publication may also be used by other Army organizations to assist in their planning for support of battalions. This manual builds on the collective knowledge and experience gained through recent operations, numerous exercises, and the deliberate process of informed reasoning. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security.

Download or read book Training Circular Tc 3 21 75 Fm 3 21 75 written by United States Government Army and published by CreateSpace. This book was released on 2013-08-31 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This training circular provides all Soldiers the doctrinal basis for the Warrior Ethos, Warrior Tasks, and other combat-critical tasks. It also updates weapon, equipment, and munitions information. This FM is not intended to serve as a stand-alone publication. It should be used with other Army publications that contain more in-depth information. The target audience for this publication includes individual Soldiers and noncommissioned officers throughout the Army. This book applies to the Active Army, the Army National Guard (ARNG)/National Guard of the United States (ARNGUS), and the U.S. Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC).

Download or read book Training Circular TC 3 21 20 Infantry Battalion Collective Task Publication February 2012 written by United States Army and published by Createspace Independent Pub. This book was released on 2012-08-13 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Purpose This training circular (TC) is a tool commanders can use during training strategy development. The products in this TC are developed to support the battalion's mission-essential task list (METL) training strategy. Scope This TC provides guidance for commanders, staff, leaders, and Soldiers who plan, prepare, execute, and assess training of the Infantry battalion. Intended Audience The primary target audience for this TC is the battalion commander, staff, and other leaders within the Infantry battalion. The secondary audience consists of training developers who develop training support materials for professional military education (PME). Applicability This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.

Download or read book Ranger Handbook TC 3 21 76 April 2017 Edition written by Headquarters, Department of the Army and published by Lulu.com. This book was released on 2019-04-13 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-21.76 uses joint terms where applicable. Selected joint and Army terms and definitions appear in both the glossary and the text. Terms for which TC 3-21.76 is the proponent publication (the authority) are italicized in the text and are marked with an asterisk (*) in the glossary. Terms and definitions for which TC 3-21.76 is the proponent publication are boldfaced in the text. For other definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. The principal audience for TC 3-21.76 are U.S. Army Rangers and combat arms units. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication.

Download or read book Training Circular Tc 3 90 6 Brigade Combat Team Collective Task Publication June 2011 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-09-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular TC 3-90.6 is a tool that commanders can use during training strategy development. The products in this TC are developed to support the brigade's full spectrum operations mission-essential task list training strategy. This training circular provides doctrinal guidance for commanders, staff, leaders, and Soldiers who plan, prepare, execute, and assess training of the brigade combat team. The primary target audience for this training circular is the Heavy, Infantry, and Stryker brigade combat team commander, staff, and other leaders. The secondary audience is training developers who develop training support materials for professional military education. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. Brigade combat teams (BCTs) conduct offensive, defensive, stability, and civil support operations. Their core mission is to close with the enemy by means of fire and maneuver, to destroy or capture enemy forces, or to repel enemy attacks by fire, close combat, and counterattack. The BCT can fight without augmentation, but it also can be tailored to meet the precise needs of its missions. Brigade combat teams conduct expeditionary deployment and integrate the efforts of the Army with military and civilian, joint, and multinational partners (Field Manual [FM] 3-90.6). To accomplish this and more, BCT commanders must train their units to standard. This training circular (TC) provides information on the Army approach to training and highlights several training considerations and enablers and, when implemented and used, can make training successful.