Download or read book Traditional and Non Traditional Robotic Sensors written by Thomas C. Henderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the written record of the NATO Advanced Research Workshop on Traditional and Non-Traditional Robotic Sensors held in the Hotel Villa del Mare, Maratea, Italy, August 28 - September 1, 1989. This workshop was organized under the auspicies of the NATO Special Program on Sensory Systems for Robotic Control. Professor Frans Groen from the University of Amsterdam and Dr. Gert Hirzinger from the German Aerospace Research Establishment (DLR) served as members of the organizing committee for this workshop. Research in the area of robotic sensors is necessary in order to support a wide range of applications, including: industrial automation, space robotics, image analysis, microelectronics, and intelligent sensors. This workshop focused on the role of traditional and non-traditional sensors in robotics. In particular, the following three topics were explored: - Sensor development and technology, - Multisensor integration techniques, - Application area requirements which motivate sensor development directions. This workshop'brought together experts from NATO countries to discuss recent developments in these three areas. Many new directions (or new directions on old problems) were proposed. Existing sensors should be pushed into new application domains such as medical robotics and space robotics.
Download or read book Traditional and Non Traditional Robotic Sensors written by Thomas C Henderson and published by . This book was released on 1990-09-28 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multisensor Fusion for Computer Vision written by J. K. Aggarwal and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains revised papers based on contributions to the NATO Advanced Research Workshop on Multisensor Fusion for Computer Vision, held in Grenoble, France, in June 1989. The 24 papers presented here cover a broad range of topics, including the principles and issues in multisensor fusion, information fusion for navigation, multisensor fusion for object recognition, network approaches to multisensor fusion, computer architectures for multi sensor fusion, and applications of multisensor fusion. The participants met in the beautiful surroundings of Mont Belledonne in Grenoble to discuss their current work in a setting conducive to interaction and the exchange of ideas. Each participant is a recognized leader in his or her area in the academic, governmental, or industrial research community. The workshop focused on techniques for the fusion or integration of sensor information to achieve the optimum interpretation of a scene. Several participants presented novel points of view on the integration of information. The 24 papers presented in this volume are based on those collected by the editor after the workshop, and reflect various aspects of our discussions. The papers are organized into five parts, as follows.
Download or read book Distributed Video Sensor Networks written by Bir Bhanu and published by Springer Science & Business Media. This book was released on 2011-01-04 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-scale video networks are of increasing importance in a wide range of applications. However, the development of automated techniques for aggregating and interpreting information from multiple video streams in real-life scenarios is a challenging area of research. Collecting the work of leading researchers from a broad range of disciplines, this timely text/reference offers an in-depth survey of the state of the art in distributed camera networks. The book addresses a broad spectrum of critical issues in this highly interdisciplinary field: current challenges and future directions; video processing and video understanding; simulation, graphics, cognition and video networks; wireless video sensor networks, communications and control; embedded cameras and real-time video analysis; applications of distributed video networks; and educational opportunities and curriculum-development. Topics and features: presents an overview of research in areas of motion analysis, invariants, multiple cameras for detection, object tracking and recognition, and activities in video networks; provides real-world applications of distributed video networks, including force protection, wide area activities, port security, and recognition in night-time environments; describes the challenges in graphics and simulation, covering virtual vision, network security, human activities, cognitive architecture, and displays; examines issues of multimedia networks, registration, control of cameras (in simulations and real networks), localization and bounds on tracking; discusses system aspects of video networks, with chapters on providing testbed environments, data collection on activities, new integrated sensors for airborne sensors, face recognition, and building sentient spaces; investigates educational opportunities and curriculum development from the perspective of computer science and electrical engineering. This unique text will be of great interest to researchers and graduate students of computer vision and pattern recognition, computer graphics and simulation, image processing and embedded systems, and communications, networks and controls. The large number of example applications will also appeal to application engineers.
Download or read book Sensory Robotics for the Handling of Limp Materials written by Paul M. Taylor and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Limp materials are used in many economically impo~tant industries such as garment manufacture, shoe manufacture, aerospace (composites) and automobiles (seats and trim). The use of sensors is essential for reliable robotic handling of these materials, which are often based on naturally occurring substances such as cotton and leather. The materials are limp and have non-homogeneous mechanical properties which are often impossible to predict accurately. The applications are very demanding for vision and tactile sensing and signal processing, adaptive control systems, planning and systems integration. This book comprises the collection of papers presented at the NATO Advanced Research Workshop on 'Sensory Robotics for the Handling of Limp Materials', held in October 1988 at II Ciocco, Tuscany, Italy. The aim of the workshop was to examine the state of the art and determine what research is needed to provide the theoretical and technological tools for the successful application of sensory robotics to the handling of limp materials. The meeting also acted as the first-ever forum for the interchange of knowledge between applications-driven researchers and those researching into the provision of fundamental tools. The participants were drawn from academia (20), industry (5), and other non-university research organisations (5).
Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2002-02-26 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has evolved into a way of life in engineering practice, and indeed pervades virtually every aspect of the modern world. As the synergistic integration of mechanical, electrical, and computer systems, the successful implementation of mechatronic systems requires the integrated expertise of specialists from each of these areas. De
Download or read book Computer Vision ECCV 90 written by Olivier Faugeras and published by Springer Science & Business Media. This book was released on 1990-04-04 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers on computer vision research in Euro- pe, with sections on image features, stereo and reconstruc- tion, optical flow, motion, structure from motion, tracking, stereo and motion, features and shape, shape description, and recognition and matching.
Download or read book Approaches to the Study of Motor Control and Learning written by J.J. Summers and published by Elsevier. This book was released on 1991-12-18 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past two decades, there has been a dramatic increasein interest in the study of motor control and learning. In thisvolume authors from a variety of backgrounds and theoreticalperspectives review their research with particular emphasis onthe methods and paradigms employed, and the future direction oftheir work. The book is divided into four main sections. Thefirst section contains chapters examining general issues andtrends in the movement behaviour field. The remaining threesections contain chapters from scientists working in threebroadly defined areas of interest: coordination and control;visuo-motor processes; and movement disorders. Each sectionprovides an overview of the different approaches and differentlevels of analysis being used to examine specific topics withinthe motor domain.
Download or read book Multimedia Interface Design in Education written by Alistair D.N. Edwards and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: What the book is about This book is about the theory and practice of the use of multimedia, multimodal interfaces for leaming. Yet it is not about technology as such, at least in the sense that the authors do not subscribe to the idea that one should do something just because it is technologically possible. 'Multimedia' has been adopted in some commercial quarters to mean little more than a computer with some form of audio ar (more usually) video attachment. This is a trend which ought to be resisted, as exemplified by the material in this book. Rather than merely using a new technology 'because it is there', there is a need to examine how people leam and eommunicate, and to study diverse ways in which computers ean harness text, sounds, speech, images, moving pietures, gestures, touch, etc. , to promote effective human leaming. We need to identify which media, in whieh combinations, using what mappings of domain to representation, are appropriate far which educational purposes . . The word 'multimodal ' in the title underlies this perspective. The intention is to focus attention less on the technology and more on how to strueture different kinds of information via different sensory channels in order to yield the best possible quality of communication and educational interaction. (Though the reader should refer to Chapter 1 for a discussion of the use of the word 'multimodal' . ) Historically there was little problem.
Download or read book Reliability and Maintenance of Complex Systems written by Süleyman Özekici and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex high-technology devices are in growing use in industry, service sectors, and everyday life. Their reliability and maintenance is of utmost importance in view of their cost and critical functions. This book focuses on this theme and is intended to serve as a graduate-level textbook and reference book for scientists and academics in the field. The chapters are grouped into five complementary parts that cover the most important aspects of reliability and maintenance: stochastic models of reliability and maintenance, decision models involving optimal replacement and repair, stochastic methods in software engineering, computational methods and simulation, and maintenance management systems. This wide range of topics provides the reader with a complete picture in a self-contained volume.
Download or read book Computer Integrated Production Systems and Organizations written by Felix Schmid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Background to the Institute The NATO Advanced Study Institute (ASI) 'People and Computers - Applying an Anthropocentric Approach to Integrated Production Systems and Organisations' came about after the distribution of a NATO fact sheet to BruneI University, which described the funding of ASls. The 'embryonic' director of the ASI brought this opportunity to the attention of the group of people, (some at BruneI and some from outside), who were together responsible for the teaching and management of the course in Computer Integrated Manufacturing (CIM) in BruneI's Department of Manufacturing and Engineering Systems. This course had been conceived in 1986 and was envisaged as a vehicle for teaching manufacturing engineering students the technology of information integration through project work. While the original idea of the course had also included the organisational aspects of CIM, the human factors questions were not considered. This shortcoming was recognised and the trial run of the course in 1988 contained some lectures on 'people' issues. The course team were therefore well prepared and keen to explore the People, Organisation and Technology (POT) aspects of computer integration, as applied to industrial production. A context was proposed which would allow the inclusion of people from many different backgrounds and which would open up time and space for reflection. The proposal to organise a NATO ASI was therefore welcomed by all concerned.
Download or read book Advances in Object Oriented Database Systems written by Asuman Dogac and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Object-oriented database management systems (OODBMSs) have generated significant excitement in the database community in the last decade. This interest stems from a real need for data management support for what are called "advanced application areas" that are not well-served by relational technology. The case for object-oriented technology has been made on three fronts. First is the data modeling requirements of the new applications. Some of the more important shortcomings of the relational systems in meeting the requirements of these applications include: 1. Relational systems deal with a single object type: a relation. A relation is used to model different real-world objects, but the semantics of this association is not part of the database. Furthermore, the attributes of a relation may come only from simple and fixed data type domains (numeric, character, and, sometimes, date types). Advanced applications require explicit storage and manipulation of more abstract types (e.g., images, design documents) and the ability for the users to define their own application-specific types. Therefore, a rich type system supporting user defined abstract types is required. 2. The relational model structures data in a relatively simple and flat manner. Non traditional applications require more complex object structures with nested objects (e.g., a vehicle object containing an engine object).
Download or read book Mapping and Spatial Modelling for Navigation written by Louis F. Pau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful implementation of applications in spatial reasoning requires paying attention to the representation of spatial data. In particular, an integrated and uniform treatment of different spatial features is necessary in order to enable the reasoning to proceed quickly. Currently, the most prevalent features are points, rectangles, lines, regions, surfaces, and volumes. As an example of a reasoning task consider a query of the form "find all cities with population in excess of 5,000 in wheat growing regions within 10 miles of the Mississippi River. " Note that this query is quite complex. It requires- processing a line map (for the river), creating a corridor or buffer (to find the area within 10 miles of the river), a region map (for the wheat), and a point map (for the cities). Spatial reasoning is eased by spatially sorting the data (i. e. , a spatial index). In this paper we show how hierarchical data structures can be used to facilitate this process. They are based on the principle of recursive decomposition (similar to divide and conquer methods). In essence, they are used primarily as devices to sort data of more than one dimension and different spatial types. The term quadtree is often used to describe this class of data structures. In this paper, we focus on recent developments in the use of quadtree methods. We concentrate primarily on region data. For a more extensive treatment of this subject, see [SameS4a, SameSSa, SameSSb, SameSSc, SameSga, SameSgbj.
Download or read book Comprehensive Systems Design A New Educational Technology written by Charles Reigeluth and published by Springer Science & Business Media. This book was released on 1993-08-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Educational technology in the broadest sense is knowledge and competence forimproving the educational process: for using hardware (equipment), software (methods), and "underware" (underlying organizational structures). This volume in the Special Programme on Advanced Educational Technology presents the results of a NATO Advanced Research Workshop on educational systems design as a new educational technology. The objective of the workshop was toadvance our knowledge about the comprehensive systems design approach for improving educational systems. The workshop was organized for the transdisciplinary interaction of three scientific groups representing design science, organizational/systems science, and educationaltechnology. Participants were selected based on their scholarship as members of one or more of these three groups. The book opens with theframing papers sent by the editors to participants prior to the workshop, then presents five sets of thematic contributions: the conceptual and empirical contexts of comprehensive systems design, the systems design focus, a systems view of designing educational systems, the educational context of systems design, and high technology focus in systems design.
Download or read book High Capacity Local and Metropolitan Area Networks written by Guy Pujolle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this workshop was to review and discuss the state of the art and the latest advances· in the area of 1-10 Gbit/s throughput for local and metropolitan area networks. The first generation of local area networks had throughputs in the range 1-20 Mbit/s. Well-known examples of this first generation networks are the Ethernet and the Token Ring. The second generation of networks allowed throughputs in the range 100-200 Mbit/s. Representatives of this generation are the FDDI double ring and the DQDB (IEEE 802.6) networks. The third generation networks will have throughputs in the range 1-10 Gbit/s. The rapid development and deployment of fiber optics worldwide, as well as the projected emergence of a market for broadband services, have given rise to the development of broadband ISDN standards. Currently, the Asynchronous Transfer Mode (ATM) appears to be a viable solution to broadband networks. The possibility of all-optical networks in the future is being examined. This would allow the tapping of approximately 50 terahertz or so available in the lightwave range of the frequency spectrum. It is envisaged that using such a high-speed network it will be feasible to distribute high-quality video to the home, to carry out rapid retrieval of radiological and other scientific images, and to enable multi-media conferencing between various parties.
Download or read book Real Time Integration Methods for Mechanical System Simulation written by Edward J. Haug and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the edited versions of lectures and selected contributed papers presented at the NATO Advanced Research Workshop on Real-Time Integration Methods For Mechanical System Simulation, held in Snowbird, Utah, August 7-11, 1989. The Institute was attended by 42 participants from 9 countries, including leading mathematicians and engineers from universities, research institutions, and industry. The majority of participants presented either invited or contributed papers during the Institute, and everyone participated in lively discussions on scientific aspects of the program. The Workshop provided a forum for investigation of promising new directions for solution of differential-algebraic equations (DAE) of mechanical system dynamics by mathematicians and engineers from numerous schools of thought. The Workshop addressed needs and opportunities for new methods of solving of DAE of mechanical system dynamics, from the perspective of a broad range of engineering and scientific applications. Among the most exciting new applications addressed was real time computer simulation of mechanical systems that, for the first time in human history, permits operator-in-the-Ioop simulation of equipment that is controlled by the human; e.g., driving a vehicle, operating a space telerobot, operating a remote manipulator, and operating construction equipment. The enormous potential value of this new application and the fact that real-time numerical integration methods for DAE of mechanical system dynamics is the pacing problem to be solved in realizing this potential served to focus much of the discussion at the Workshop.
Download or read book Computational Sensor Networks written by Thomas Henderson and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: A model-based approach to the design and implementation of Computational Sensor Networks (CSNs) is proposed. This high-level paradigm for the development and application of sensor device networks provides a strong scientific computing foundation, as well as the basis for robust software engineering practice. The three major components of this approach include (1) models of phenomena to be monitored, (2) models of sensors and actuators, and (3) models of the sensor network computation. We propose guiding principles to identify the state or structure of the phenomenon being sensed, or of the sensor network itself. This is called computational modeling. These methods are then incorporated into the operational system of the sensor network and adapted to system performance requirements to produce a mapping of the computation onto the system architecture. This is called real-time computational mapping and allows modification of system parameters according to real-time performance measures. This book deals with the development of a mathematical and modular software development framework to achieve computational sensor networks.
